✕

Support 24/7
Text 215-766-5665

✕

Support 24/7
Text 215-766-5665

✕
✕

Support 24/7
Text 215-766-5665

✕

Support 24/7
Text 215-766-5665

✕
October 6, 2026
October 6, 2026

Arc Flash Incidents Reported in the News Highlight Ongoing Electrical Safety Risks

When arc flash incidents appear in the news one at a time, they can seem isolated. Viewed together, they tell a more concerning story. Tyndale found 18 arc flashes that made the TV news over the 17 months since OSHA released the new arc flash guidance involving commercial and industrial […]
Do you like it?
Read more
August 12, 2026
August 12, 2026

The Best of Arc Week: The Five Episodes Every Electrical Worker Should See

This year, we’re revisiting the best of Arc Week with five fan-favorite, must-watch arc flash safety episodes that remain critical following the latest OSHA arc flash guidance—and have only grown more important with time due to today’s rapidly-increasing demand for electricians.
Do you like it?
Read more
January 9, 2026
January 9, 2026

2025 In Review: Advancing Worker Safety, Creating Lasting Impact

In 2025, worker safety didn’t stand still—it moved forward with purpose. From new arc flash research and expanded arc-rated and flame resistant (AR/FR) clothing options to faster fulfillment, smarter tools, and meaningful community impact, Tyndale focused on progress that makes a measurable difference.
Do you like it?
Read more
April 25, 2025
April 25, 2025

Do I Need AR PPE for Low Voltage Work?

When you hear “low voltage,” it’s easy to assume low risk — but that assumption can be dangerous, even fatal. Most arc flash injuries occur on systems rated at 480 volts and below, where electrical work is frequent, and PPE is often overlooked due to the false belief that “low […]
Do you like it?
Read more
April 11, 2025
April 11, 2025

De-Energized or Not? OSHA Clarifies Arc Flash & Electrical Safety Rules

We’re continuing our series on OSHA’s new arc flash guidance by tackling a common question: What constitutes de-energized work? In the electrical industry, it’s common to hear: “I don’t work energized, so I don’t need personal protective equipment (PPE).” But that assumption can be dangerous. OSHA and NFPA 70E provide […]
Do you like it?
Read more
March 28, 2025
March 28, 2025

Do I Need AR PPE to Use a Voltmeter or Multimeter?

In the past, many inside electricians didn’t wear arc-rated (AR) clothing or personal protective equipment (PPE) because they believed they weren’t working on energized equipment. But OSHA’s updated arc flash safety guidance changes previous assumptions about what constitutes de-energized work.
Do you like it?
Read more
February 28, 2025
February 28, 2025

Why Did OSHA Issue New Arc Flash Guidance?

In November 2024, the Occupational Safety and Health Administration (OSHA) issued new arc flash guidance for the first time in over 20 years. This updated guidance was published in response to stalled progress in reducing electrical injuries, persistent misconceptions about low-voltage work, and gaps in PPE compliance that continue to […]
Do you like it?
Read more
January 15, 2025
January 15, 2025

Fundamentals of Arc Flash: Introduction

In November 2024 OSHA released new guidance to improve arc flash safety amongst commercial, industrial, and residential electricians and operators, maintenance, and others working on or near exposed energized electrical parts. Behind the new guidance is a chilling fact: preventable arc flash injuries continue to occur amongst inside electricians at […]
Do you like it?
Read more
December 20, 2024
December 20, 2024

Webinar Recap: Tyndale and Safety + Health Magazine Discuss OSHA’s New Arc Flash Guidance

OSHA recently released its new arc flash guidance in 20 years, aiming to reduce preventable arc flash injuries amongst commercial, industrial, and residential electricians – with major implications for “de-energized” and low voltage work. Scott Margolin, Tyndale’s Vice President of Technical and Chairman of the Board of the Partnership for […]
Do you like it?
Read more
November 25, 2024
November 25, 2024

BREAKING: OSHA ISSUES NEW ARC FLASH SAFETY GUIDANCE

Breaking news: OSHA has just released new guidance on arc flash safety – for the first time in almost 20 years. Recognizing the continued prevalence of preventable arc flash injuries and fatalities despite longstanding safety standards and proven PPE the guidance is designed to better protect commercial,  industrial, and residential […]
Do you like it?
Read more
July 23, 2024
July 23, 2024

Developing: New OSHA Arc Flash Guidance Expected

OSHA recently confirmed it’s actively working to close a gap in arc flash protection for up to 750,000 commercial and industrial electricians who are not currently given the PPE they need to stay safe on the job – counter to recognized industry standards. In fact, the Assistant Secretary for Occupational […]
Do you like it?
Read more
May 31, 2024
May 31, 2024

What is an “Adequately Rated” Meter According to NFPA 70E?

NFPA 70E is a vital standard for establishing practical and safe workplaces in order to avoid electrical hazards. Within NFPA 70E, the phrase “adequately rated meter” pops up frequently. The term “adequately rated” is often misunderstood throughout industries that follow NFPA 70E and use electrical testing meters. Read on to […]
Do you like it?
Read more
May 9, 2023
May 9, 2023

The Rise of Electrification: OSHA’s Revisiting of Arc Flash Guidance

Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. Tyndale’s Rise of Electrification series highlights the growing demand for electricians in the United States. In parts one and two, we discussed the significance of this trend and its implications for […]
Do you like it?
Read more
November 4, 2022
November 4, 2022

UPDATE: Where does OSHA Stand on Expanding Protections for Indoor Electricians?

Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. More than 500,000 Americans working on or near energized industrial electrical equipment today do not have protection from deadly arc flash hazards, despite safety standards that have been in place for […]
Do you like it?
Read more
February 18, 2022
February 18, 2022

BREAKING: What’s the Latest from OSHA and PES on Arc Flash?

Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here.   More than 500,000 of Americans working on or near energized industrial electrical equipment today do not have protection from the deadly arc flash hazard, despite safety standards that have been […]
Do you like it?
Read more
September 24, 2021
September 24, 2021

Congress Urges OSHA to Act on AR / FR Clothing for Industrial Electricians

Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. An arc flash can reach temperatures four times hotter than the surface of the sun, but we can avoid virtually all fatal and catastrophic arc flash injuries with arc-rated and flame […]
Do you like it?
Read more
April 16, 2021
April 16, 2021

Which Standards Should My FR Rainwear Pass?

If you’re specifying or purchasing arc-rated and flame resistant (AR / FR) rainwear, it’s critical that you know which standards are used to make compliance claims. Tyndale strongly recommends against accepting or purchasing FR rainwear that is only using ASTM D6413, the vertical flame test, to make those claims. Which […]
Do you like it?
Read more
April 2, 2021
April 2, 2021

What Does OSHA Say About Home vs. Industrial Laundry?

As you may know, there two main program types when it comes to obtaining arc rated and flame resistant (AR / FR) clothing – Managed Direct Purchase with Home Laundry and Uniform Rental with Industrial Laundry. When you have one supplier telling you that their program is the best and […]
Do you like it?
Read more
July 20, 2020
July 20, 2020

Understanding the Difference Between NFPA® 2112 & 2113 Standards

Two safety standards well-known in the Flame Resistant (FR) clothing industry are NFPA® 2112 and NFPA® 2113. While you may have heard of them, most important is understanding the difference between the two. NFPA 2112 specifies performance requirements of the FR fabrics, while NFPA® 2113 is a companion standard to […]
Do you like it?
Read more
June 12, 2020
June 12, 2020

What is the Impact of an Arc Flash?

For most people, going to work doesn’t involve being exposed to serious hazards. However, if you are a utility worker performing certain essential job functions, you are exposed to arc flash hazards on a regular basis. Companies are responsible for providing extensive safety training and workers are required to abide […]
Do you like it?
Read more
January 8, 2019
NFPA 2112 Changes in 2018
January 8, 2019

Important Changes to NFPA 2112 – 2018 Edition

NFPA 2112, Standard on Flame Resistant Clothing for Protection of Industrial Personnel Against Short-Duration Thermal Exposures from Fire, was revised and an updated edition was issued earlier this year. Below, we provide an overview of the important changes: Updated Title and New Terminology One of the biggest changes in the […]
Do you like it?
Read more
October 3, 2018
What are NFPA Standards?
October 3, 2018

What are NFPA Standards?

You may wear PPE certified to NFPA standards, or undertake work regulated by NFPA codes everyday. But what is NFPA and what are NFPA standards? NFPA is short for the National Fire Protection Association, a nonprofit organization committed to reducing injury, death, and other loss stemming from fire, electrical, and […]
Do you like it?
Read more
March 21, 2018
NFPA 70E 2018 - Whats New?
March 21, 2018

NFPA 70E 2018 – What’s New?

NFPA 70E has since been revised in 2021, though updates pertaining to AR / FR clothing were minor. NFPA 70E requirements for safe work practices protect personnel by reducing exposure to major electrical hazards. Originally developed at OSHA’s request, NFPA 70E helps companies and employees avoid workplace injuries and fatalities […]
Do you like it?
Read more
February 28, 2018
Brandon Schroeder - How Experience Leads to Risky Behavior
February 28, 2018

How Experience Leads to Risky Behavior

This is the first post in a four-part series exploring factors that could contribute to an arc flash incident, based on the experience of arc flash survivor and safety advocate Brandon Schroeder. Picture this: You’ve been a licensed electrician since you were 23 years old, with five years as an […]
Do you like it?
Read more
February 9, 2018
February 9, 2018

Don’t Risk It! An Arc Flash Survivor Speaks Out.

On August 24, 2011, Brandon Schroeder was working on a job site handling an electrical task that he had performed without incident dozens of times before. Only this time, things didn’t go according to plan – and Brandon was caught in the blast from a massive arc flash. Brandon suffered […]
Do you like it?
Read more
August 18, 2016
August 18, 2016

What Standard Governs Arc Flash Protective Rainwear?

ASTM F1891, Standard Specification for Arc and Flame Resistant Rainwear, establishes minimum performance specifications, test methods, and other suggested information – including a sizing guide and purchasing specification – for rainwear used to protect workers from momentary exposures to arc flashes or flame.
Do you like it?
Read more
October 30, 2014
October 30, 2014

Tyndale PPE Guidance Featured in ISHN October 2014

Read Tyndale’s article, featured on page 44 of the October 2014 edition of Industrial Safety & Hygiene News (ISHN) Magazine, for guidance to employers looking to understand both OSHA’s 2014 update to 29 CFR 1910.269 and OSHA’s view of care and maintenance for PPE in a broader context—beyond the utility […]
Do you like it?
Read more
✕

Support 24/7
Text 215-766-5665