Technical Archives - Tyndale USA

October 6, 2026

Arc Flash Incidents Reported in the News Highlight Ongoing Electrical Safety Risks

When arc flash incidents appear in the news one at a time, they can seem isolated. Viewed together, they tell a more concerning story. Tyndale found 18 arc flashes that made the TV news over the 17 months since OSHA released the new arc flash guidance involving commercial and industrial […]

August 12, 2026

The Best of Arc Week: The Five Episodes Every Electrical Worker Should See

This year, we’re revisiting the best of Arc Week with five fan-favorite, must-watch arc flash safety episodes that remain critical following the latest OSHA arc flash guidance—and have only grown more important with time due to today’s rapidly-increasing demand for electricians.

January 9, 2026

2025 In Review: Advancing Worker Safety, Creating Lasting Impact

In 2025, worker safety didn’t stand still—it moved forward with purpose. From new arc flash research and expanded arc-rated and flame resistant (AR/FR) clothing options to faster fulfillment, smarter tools, and meaningful community impact, Tyndale focused on progress that makes a measurable difference.

October 31, 2025

FR FAQ: How Should My FR Clothing Fit?

One of the most common questions we hear about arc-rated and flame resistant (AR / FR) clothing is: How should it fit? Is a tight, snug, or loose fit recommended? Before we dig into our answer, our stance on this topic is firm: When it comes to AR/FR clothing, proper fit […]

October 3, 2025

When Should I Retire My FR Clothing?

You count on your arc-rated and flame resistant (AR / FR) clothing to keep you safe when all else fails. But how long do its protective properties last – and how can you tell when it should be retired and replaced? Scott Margolin, Vice President of Technical, explains what to […]

September 12, 2025

What Does cal/cm² Mean for Arc Flash Safety?

When it comes to arc flash protection, one small unit of measurement makes a big difference: cal/cm² (calories per square centimeter). If you’ve ever looked at the label on an arc-rated (AR) garment, you’ve likely seen this number—but what does it really mean? Our Vice President of Technical, Scott Margolin, […]

August 22, 2025

Arc Week Season 6, Ep. 5 – Belief: “Fabric Softener & Lint Ruin Arc-rated PPE Effectiveness.”

Over the years, concerns about fabric softener, flammable lint, and laundry methods have circulated widely in the electrical safety industry. But are these concerns valid—or are they BS?

August 21, 2025

Arc Week Season 6, Ep. 4 – Belief: “Bleach Destroys My Arc-rated PPE.”

You’ve likely heard the claims: “Bleach ruins FR clothing,” or “Only industrial laundering is safe.” Since arc-rated and flame resistant (AR / FR) garments are critical safety gear, concerns about their performance—especially when it comes to care and maintenance—are understandable. We took this belief to the lab and tested it […]

August 20, 2025

Arc Week Season 6, Ep. 3 – Belief: “We Don’t Work Energized.”

Think you’re safe to skip arc-rated (AR) PPE because the power is off? Think again. Before you trust the hearsay, watch this — it could be the difference between walking away and a life-changing injury (or worse!).

August 19, 2025

Arc Week Season 6, Ep. 2 – Belief: “Who Needs Arc-Rated PPE If the Arc Blast Kills You?”

Without question, an arc flash causes a loud bang. But is the resulting shockwave strong enough to blow someone back, damage internal organs, or cause other injuries?

August 18, 2025

Arc Week Season 6, Ep. 1 – Belief: “I Don’t Need Arc-rated PPE – Cotton Is Fine.”

One of the oldest claims floating around out there is “I don’t need arc-rated (AR) PPE – cotton is fine.” But is it true? We put this claim under the microscope to reveal the truth:

July 18, 2025

Bull Sharks and Bull$#!t: Arc Week Season 6

Like bull sharks, arc flash protection is often misunderstood — and just as dangerous if you get it wrong. Inspired by a popular TV show, this season we’re testing some dangerous claims about both. Is cotton safe? Does low voltage = low risk? Could an arc blast be fatal? Can […]

April 25, 2025

Do I Need AR PPE for Low Voltage Work?

When you hear “low voltage,” it’s easy to assume low risk — but that assumption can be dangerous, even fatal. Most arc flash injuries occur on systems rated at 480 volts and below, where electrical work is frequent, and PPE is often overlooked due to the false belief that “low […]

April 17, 2025

Do I Need AR PPE to Throw a Breaker?

As the industry absorbs OSHA’s new arc flash safety guidance and makes changes to comply and better protect workers, one question we’ve often received is: “Do I really need PPE just to throw a breaker?”

April 11, 2025

De-Energized or Not? OSHA Clarifies Arc Flash & Electrical Safety Rules

We’re continuing our series on OSHA’s new arc flash guidance by tackling a common question: What constitutes de-energized work? In the electrical industry, it’s common to hear: “I don’t work energized, so I don’t need personal protective equipment (PPE).” But that assumption can be dangerous. OSHA and NFPA 70E provide […]

March 28, 2025

Do I Need AR PPE to Use a Voltmeter or Multimeter?

In the past, many inside electricians didn’t wear arc-rated (AR) clothing or personal protective equipment (PPE) because they believed they weren’t working on energized equipment. But OSHA’s updated arc flash safety guidance changes previous assumptions about what constitutes de-energized work.

March 21, 2025

Feel the Difference: What Makes AR/FR Clothing Truly Comfortable?

When it comes to arc-rated and flame-resistant (AR/FR) clothing, protection is non-negotiable—but comfort matters too. After all, workdays can be long, and the right clothing can make all the difference in staying focused, safe, and at ease on the job. At Tyndale, we take a thoughtful approach to design, ensuring […]

March 14, 2025

Do I Need Arc-Rated PPE to Open a Residential Breaker Panel?

OSHA released new Arc Flash Guidance in November 2024 to ensure that arc-rated (AR) clothing and equipment is provided to and worn by anyone working on or near energized equipment. In particular, this guidance clarifies that even low-voltage systems, including 120/208V, can generate arc flashes with more than enough energy […]

February 28, 2025

Why Did OSHA Issue New Arc Flash Guidance?

In November 2024, the Occupational Safety and Health Administration (OSHA) issued new arc flash guidance for the first time in over 20 years. This updated guidance was published in response to stalled progress in reducing electrical injuries, persistent misconceptions about low-voltage work, and gaps in PPE compliance that continue to […]

January 15, 2025

Fundamentals of Arc Flash: Introduction

In November 2024 OSHA released new guidance to improve arc flash safety amongst commercial, industrial, and residential electricians and operators, maintenance, and others working on or near exposed energized electrical parts. Behind the new guidance is a chilling fact: preventable arc flash injuries continue to occur amongst inside electricians at […]

December 20, 2024

Webinar Recap: Tyndale and Safety + Health Magazine Discuss OSHA’s New Arc Flash Guidance

OSHA recently released its new arc flash guidance in 20 years, aiming to reduce preventable arc flash injuries amongst commercial, industrial, and residential electricians – with major implications for “de-energized” and low voltage work. Scott Margolin, Tyndale’s Vice President of Technical and Chairman of the Board of the Partnership for […]

November 25, 2024

BREAKING: OSHA ISSUES NEW ARC FLASH SAFETY GUIDANCE

Breaking news: OSHA has just released new guidance on arc flash safety – for the first time in almost 20 years. Recognizing the continued prevalence of preventable arc flash injuries and fatalities despite longstanding safety standards and proven PPE the guidance is designed to better protect commercial, industrial, and residential […]

October 4, 2024

Understanding AR/FR Garment Compliance vs. Protection

It may be surprising, but compliance and protection aren’t always synonymous – especially when it comes to arc-rated and flame resistant (AR/FR) garments. Put simply, compliance refers to what we must do to meet regulatory requirements, such as OSHA guidelines or what is outlined within standards like NFPA 70E or […]

September 13, 2024

Revealing the Life-Saving Difference Between ASTM F1891 and ASTM F2733 for Rainwear

Unfortunately, not every day on the jobsite comes with clear skies. Protective rainwear is essential for work in inclement weather, ensuring both comfort and maximum protection against workplace hazards. Rainwear compliant with standards ASTM F1891 or ASTM F2733 offers outstanding protection, but what sets these two rainwear standards apart when […]

August 23, 2024

Arc Week Season 5, Ep. 5: Does AR / FR Clothing Protect in a DC Arc?

See how flammable and arc-rated and flame resistant (AR / FR) clothing fare in direct current (DC) arcs. Our tests reveal that DC arcs pose similar risks as alternating current (AC) arcs – and that AR / FR clothing provides effective protection against both. Please be aware: this video contains […]

August 22, 2024

Arc Week Season 5, Ep. 4: Top 4 Causes of Arc Flash Injury – Working Energized Without PPE (#1 and #2)

The top two causes of arc flash injury and fatality in the US share a commonality: the victims weren’t wearing any PPE at all. Correct misconceptions, combat complacency, and challenge the status quo to strike these causes from the list: Please be aware: this video contains graphic content and may […]

August 21, 2024

Arc Week Season 5, Ep. 3: Top 4 Causes of Arc Flash Injury – Task-Based PPE Not Worn (#3)

Imagine: you’re on a job, facing a deadline, and your PPE isn’t handy. This isn’t just a hypothetical, it’s the #3 cause of arc flash injury and fatality in the US. Here’s why this scenario is common with task-based PPE: Please be aware: this video contains graphic content and may […]

August 20, 2024

Arc Week Season 5, Ep. 2: Top 4 Causes of Arc Flash Injury – Improper Wear (#4)

The vast majority of negative arc flash outcomes are attributable to four main causes – allowing us to chart a course to a safer future. Our host Scott Margolin reveals the #4 leading cause to curtail at your company: Please be aware: this video contains graphic content and may not […]

August 19, 2024

Arc Week Season 5, Ep. 1: Why Arc Rated Clothing Matters – Don’t Wear Fuel

Why Flammable Clothing Fuels Injury When it comes to thermal hazards like arc flash, flash fire, combustible dust, and others the danger often isn’t just the event itself—it’s the igniting of flammable clothing. These events are brief and highly directional, and if your clothes catch fire the consequences are severe. […]

August 2, 2024

EH-Rated Boots – What You Should Know about Maintenance and Testing

For anyone working in an energized electrical environment, wearing the proper protective gear is a must – including the appropriate footwear! That’s where electrical hazard (EH) rated boots come into play! These boots are designed to protect you from potential electrical hazards. Join our Vice President of Technical, Scott Margolin, […]

July 26, 2024

Does FR Clothing Shrink?

A common question we’re asked about arc-rated and flame resistant (AR / FR) clothing is, “Does it shrink when laundered?” While all knit garments have the potential to shrink after washing and drying, modern AR / FR clothing is much more resilient than it was a decade ago. Today’s quality […]

July 23, 2024

Developing: New OSHA Arc Flash Guidance Expected

OSHA recently confirmed it’s actively working to close a gap in arc flash protection for up to 750,000 commercial and industrial electricians who are not currently given the PPE they need to stay safe on the job – counter to recognized industry standards. In fact, the Assistant Secretary for Occupational […]

July 19, 2024

How Long Does FR Clothing Last? Understanding the Lifespan of Arc-Rated and Flame Resistant Clothing

One of the most frequent questions we receive about arc-rated and flame resistant (AR / FR) clothing concerns longevity: How long does the clothing last? Below, our Vice President of Technical, Scott Margolin, explains why this question has more nuance than you might think. How long does FR clothing […]

June 28, 2024

Bug-Repellent FR Clothing: Your Shield Against Insect Hazards

When working outdoors, protection can mean guarding against thermal hazards like arc flashes and flash fires. However, it’s also important to have garments that defend against smaller – but also dangerous – threats posed by insects. At Tyndale, we understand the importance of comprehensive safety, which is why we’re proud […]

May 31, 2024

What is an “Adequately Rated” Meter According to NFPA 70E?

NFPA 70E is a vital standard for establishing practical and safe workplaces in order to avoid electrical hazards. Within NFPA 70E, the phrase “adequately rated meter” pops up frequently. The term “adequately rated” is often misunderstood throughout industries that follow NFPA 70E and use electrical testing meters. Read on to […]

May 17, 2024

Understanding What Accessories Should NOT Cross an Arc Flash Boundary

When it comes to electrical safety, understanding and adhering to strict guidelines is paramount to protecting yourself from potential hazards. When working near energized electrical components, it’s crucial to know what is and isn’t permissible within the protection boundaries set forth by standards such as NFPA 70E, Standard for Electrical […]

May 3, 2024

Wearing AR/FR Clothing: A Story of Survival and Protection

Arc-rated and flame resistant (AR / FR) clothing is indispensable for workers facing arc flash, flash fire, or combustible dust hazards due to their brief and directional nature. Unlike flammable clothing that can ignite and continue to burn, AR / FR garments prevent ignition and offer vital insulation against thermal […]

April 26, 2024

Why You Should NOT Wear Athletic Shirts Underneath Your AR / FR Garments

It’s critical to wear arc-rated and flame resistant (AR / FR) clothing while working in energized environments. Equally important, however, is what not to wear underneath your protective clothing, specifically moisture-wicking athletic wear. Tune in to the video below as our Lead Corporate Safety and Technical Trainer, Jason Brozen explains […]

February 16, 2024

Enespro 40cal Suit Faces Off Against DC Arc – Witness the Power!

Navigating energized electrical environments comes with the inherent risk of direct current (DC) arc flash hazards. When working in this environment, it is critical to be equipped with proper PPE that ensures your safety. Curious about the resilience of an Enespro arc flash suit when it encounters an oncoming DC […]

February 9, 2024

Consequences of Arc Flash Exposure: Testing FR vs. Non-FR

Over the years, Tyndale has released numerous videos demonstrating the dangers of arc flash exposure. In these videos, we emphasize the importance of wearing proper protection in the workplace to mitigate arc flash hazards by demonstrating the common mistakes made when wearing arc-rated and flame resistant (AR / FR) apparel. […]

December 1, 2023

DC-Cember: Unwrapping the Dangers of Direct Current Arcs

Tyndale is proud to present our new December video series, DC-Cember: Unwrapping the Dangers of Direct Current Arcs, where we emphasize the importance of proper protection against direct current (DC) hazards. Through our own video footage, we reveal the cold, hard truth to electrical workers everywhere and how they can […]

October 12, 2023

New FR Base Layers to Love This Season

Layering is an excellent way to maintain comfort in in-between temperatures, when it’s chilly in the morning and evening but warm in between, and during the winter months, when you’re going between warm buildings and trucks and frigid outdoor weather. Too cold? Add a layer. Too warm? Remove a layer […]

September 29, 2023

Testing the Heat: Advanced Thermal Analysis Facilities

When it comes to personal protective equipment (PPE) for individuals working in hazardous environments, the importance of arc-rated and flame resistant (AR/FR) clothing cannot be overstated. These specialized garments are designed to protect wearers from arc flash and flash fire hazards encountered in utility, oil and gas, and other industries. […]

September 27, 2023

Winterize Your Closet with New Outerwear by Tyndale

Fall is officially here, and that means it’s time to order outerwear. If you’re looking for a new vest, jacket, or coat this season, look no further. We’re pleased to introduce four new Tyndale outerwear styles – delivering the best in quality, warmth, style, and dual-hazard performance. With comfortable fabrics, […]

August 8, 2023

Spin Cycle: Laundering an AR / FR Garment 100 Times and Exposing It to Flammable Lint

Welcome to the fifth and final installment of our Spin Cycle blog and video series. Uniform rental companies claim you can’t launder AR / FR apparel at home, but is that necessarily true? They often suggest that when AR / FR clothing is washed with regular clothing, flammable lint can adhere to […]

August 1, 2023

Spin Cycle: Laundering an AR / FR Garment 100 Times

In the fourth installment of our Spin Cycle blog and video series, we turn our attention to arc-rated and flame resistant (AR / FR) clothing durability and performance. Tyndale’s Vice President of Technical, Scott Margolin, tests whether laundering an AR / FR garment 100 times under normal home laundering conditions affects its […]

July 28, 2023

Protective Clothing Strategies to Prevent Heat Stress

The heat is on! The Farmer’s Almanac describes the “dog days of summer” – from July 3 to August 11 each year – as the hottest and most unbearable days of the year. And so far, this entire summer has been blistering hot across North America. After a record-breaking June, […]

July 25, 2023

Spin Cycle: 50 Wash Cycles with Fabric Softener on an AR/FR Garment

Welcome to the third installment of our Spin Cycle blog and video series! Join Tyndale’s Vice President of Technical, Scott Margolin, as he takes you through today’s test: determining whether using fabric softener during home laundering affects an AR / FR garment’s performance. You may hear uniform rental companies say that bleach […]

July 18, 2023

Spin Cycle: 50 Washes with Oxidative Bleach on an AR/FR Garment

For episode two of Spin Cycle, we head back to the testing facility with Tyndale’s Vice President of Technical, Scott Margolin, as he takes us through today’s test: whether oxidative bleach affects an AR / FR garment’s performance. Many laundry detergents contain oxidative bleach products, but does oxidative bleach have […]

July 11, 2023

Spin Cycle: 50 Wash Cycles with Liquid Chlorine Bleach on an AR/FR Garment

Welcome to the first episode of our Spin Cycle blog and video series! Join Tyndale’s Vice President of Technical, Scott Margolin, as he takes you through today’s test to determine whether using liquid chlorine bleach during home laundering affects an AR / FR garment’s performance. All labels in arc-rated and […]

July 7, 2023

Spin Cycle: Washing Away AR/FR Home Laundry Misconceptions

Is home laundering safe when it comes to the care and maintenance of arc-rated and flame resistant (AR / FR) clothing? Absolutely! But common sales tactics used by uniform rental companies attempt to convince workers and businesses alike that industrial laundering is a requirement. They likely offer industrial laundry services […]

June 30, 2023

EVs and the DC Hazard: Non-AR Hi-Vis Vest & Outerwear in a DC Arc

Welcome to our BONUS episode of EVs and the DC Hazard with Scott Margolin, Vice President of Technical at Tyndale. Today, we are focusing on the importance of understanding the risks associated with wearing flammable high-visibility (hi-vis) vests and outerwear in the presence of a DC arc. Many people in […]

June 21, 2023

EVs and the DC Hazard: 88/12 Outerwear in a DC Arc

We’re ending our series with a bang! In today’s episode we test a 9 oz. arc-rated (AR) windbreaker made with an 88% cotton and 12% nylon (“88/12”) blend, exposing it to high incident energy levels. Prepare to witness the extraordinary protective capabilities of this AR outerwear as it withstands and […]

June 20, 2023

EVs and the DC Hazard: NSA Enespro® 40 cal Suit in a DC Arc

What happens in a DC arc when the potential incident energy is high enough to require an arc suit instead of dailywear? We set out to find out. In today’s leading-edge demonstration, we subject an NSA Enespro® 40 cal arc suit to a DC arc with high incident energy. Join […]

June 15, 2023

EVs and the DC Hazard: 88/12 CAT 2 Coverall in a DC Arc

Today we’re switching it up: instead of testing shirts and pants against DC arcs, we test the significance of DC arcs against AR 88/12 CAT 2 coveralls. Coveralls made from an 88/12 fabric blend – that is, a fabric that’s 88% AR/FR cotton and 12% nylon – are commonly used […]

June 14, 2023

EVs and the DC Hazard: EBT AR Garment Exposed Above Arc Rating

In our previous episode, we showed you how Tyndale’s FRMC® arc-rated (AR) shirt and jeans perform in a DC arc flash. Explore the Boundaries of DC Arcs Hold on tight as we push the limits! We’re intentionally subjecting an energy breakopen threshold (EBT) AR garment, rated at 9.1 calories, to […]

June 13, 2023

EVs and the DC Hazard: Tyndale FRMC® CAT 2 Outfit in a DC Arc

In our previous episode, we pushed an NSA TECGEN® CAT 2 AR shirt and a pair of AR jeans to their limits by subjecting them to a thrilling DC arc. And they passed with flying colors, effectively extinguishing fire and eliminating any breakopen risks. Get Ready for an Electrifying Episode […]

June 8, 2023

EVs and the DC Hazard: NSA TECGEN® CAT 2 Outfit in DC Arc

In our last two episodes, we tested non-protective polyester/cotton blend and 100% cotton fabrics to see how they perform in the face of a DC arc. But how do popular arc-rated (AR) garments perform in DC arcs at or near their arc ratings? Follow along with our next few episodes […]

June 7, 2023

EVs and the DC Hazard: Cotton Workwear in a DC Arc

Many people think that 100% cotton is okay to wear when there’s an arc hazard because it doesn’t melt. But is that true? Can a DC arc flash ignite flammable 100% cotton workwear, and does it require any more or less energy than an AC arc to do so? Plug […]

June 6, 2023

EVs and the DC Hazard: Poly/Cotton Workwear in a DC Arc

Did you know that polyester and cotton (“poly/cotton”) blend is one of the most common fabric choices for making non-protective workwear? In fact, this type of fabric is being worn by many people who work in and around EVs. But what happens to poly/cotton fabric when it’s exposed to a […]

May 10, 2023

EVs and the DC Hazard: AC vs DC Arc Flash – What’s the Difference?

Technology has a habit of outpacing understanding of hazards and safety; DC arc flash is no exception. With the rapid rise of EVs, DC power is expanding exponentially in the USA. DC battery manufacturing, energy storage and DC-to-DC charging are all growing rapidly, and battery replacement, maintenance, and repairs are close behind. […]

May 9, 2023

The Rise of Electrification: OSHA’s Revisiting of Arc Flash Guidance

Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. Tyndale’s Rise of Electrification series highlights the growing demand for electricians in the United States. In parts one and two, we discussed the significance of this trend and its implications for […]

May 5, 2023

What are Tyndale’s Top Safety Tips for Summer 2023?

Summer is right around the corner! And while we typically enjoy many fun summertime activities, such as going to the beach, hiking, and camping, the season also presents some safety issues. Stormy weather, heat-related illnesses, skin damage from the sun’s UV rays, and bug bites require extra precautions, which are […]

April 21, 2023

How to Remove Stains from AR / FR Clothing

Working in a profession that requires you to wear flame resistant and arc-rated (AR / FR) clothing is serious business. You’re exposed to potential risks and hazards on a regular basis, so you must be prepared with the right gear. But what do you do when your trusted AR / […]

March 22, 2023

Dangers of Improper Wear Flash Fire: Episode 6 – Flammable High Visibility Vest & Outerwear Over FRC

Welcome to another episode of The Dangers of Improper Wear and Flash Fire, where Scott Margolin, Tyndale’s Vice President of Corporate Strategy & Technical, takes center stage to shed light on common improper wear mistakes that could result in injury – or worse. This episode highlights how wearing both a […]

March 14, 2023

Dangers of Improper Wear Flash Fire: Episode 5 – Flammable Hoodie Over FRC

Don’t let a Flammable Hoodie be your Downfall Get ready to rethink the way you dress for work. In this episode, Scott walks viewers through a life-threatening scenario where a female manikin wearing flame resistant (FR) pants but a flammable hoodie over her FR clothing is exposed to a flash […]

February 28, 2023

Dangers of Improper Wear Flash Fire: Episode 3 – Flammable Outerwear + Cotton Base Layer

Flash fires are unpredictable and can leave little to no time for people to react. Hence, the right clothing is crucial to protect oneself from intense heat, flames, and potential injury. In this episode of Dangers of Improper Wear: Flash Fire, Scott Margolin, Tyndale’s Vice President of Corporate Strategy & […]

February 22, 2023

Dangers of Improper Wear Flash Fire: Episode 2 – Unzipped FR Coveralls

Flash fires are one of the most dangerous hazards in the workplace, and they can cause serious injuries or even fatalities if proper precautions are not taken. In this blog post, we will discuss the risks of improperly wearing protective clothing – specifically unzipped flame resistant (FR) coveralls – in […]

February 14, 2023

Dangers of Improper Wear Flash Fire: Episode 1 – Wearing Flammable Clothing

Welcome to episode 1 of our Dangers of Improper Wear: Flash Fire blog and video series. Let’s join our guide, Tyndale’s Vice President of Corporate Strategy & Technical, as he explains today’s improper wear topic: wearing flammable clothing – as opposed to flame resistant clothing (FRC) – when exposed to […]

January 10, 2023

See the Fire, Feel the Heat: New Flash Fire Videos Available Now

Flame resistant clothing (FRC) is an essential form of protection for workers who may be exposed to a flash fire. Among others, flash fire hazards are present in oil and gas and chemical manufacturing settings, as well as manufacturing environments where combustible dust can accumulate. Because the rapidly-moving flame front […]

November 4, 2022

UPDATE: Where does OSHA Stand on Expanding Protections for Indoor Electricians?

Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. More than 500,000 Americans working on or near energized industrial electrical equipment today do not have protection from deadly arc flash hazards, despite safety standards that have been in place for […]

August 3, 2022

Proud to Protect Canada – Episode 10: AR / FR Labeling Requirements in Canada

In previous episodes of our Proud to Protect Canada series, we reviewed the safety standards governing PPE and protective clothing related to arc flash and flash fire hazards. In Episode 3, we learned that CSA Z462, the Canadian standard governing arc flash protection, is very similar to its US counterpart, […]

June 24, 2022

What’s New with Tyndale’s Garment Labels?

Garment labels for all kinds of clothing are essential to ensure you’ve received the correct size and have instructions for caring for and washing the garment properly. While standard labeling for arc-rated and flame-resistant (AR / FR) clothing is equally important, we believe that labeling for garments that protect workers […]

April 21, 2022

Can Flame Resistance Be Washed Out of My AR/FR Clothing?

If you’ve ever wondered if the flame resistance can be washed out of your arc-rated and flame resistant (AR / FR) clothing, you’re in good company – this is one of the top 3 questions we receive! The short answer? Everything Tyndale sells – whether made or distributed by us […]

March 15, 2022

Proud to Protect Canada – Episode 3: What is CSA Z462?

In Episode 2 of our Proud to Protect Canada series, Tyndale’s Canada Sales Director, Paul Castelli, and VP of Technical, Scott Margolin, answer the question, what is an arc flash. Beyond the definition, they discussed what causes an arc flash, the dangers associated with an arc flash, and how to […]

March 9, 2022

Is Your AR/FR Wardrobe Ready for Spring?

Spring, is that you starting to creep in? Warmer weather is around the corner, and not a minute too soon. Now, as the seasons start to change, is a perfect time to tackle some spring cleaning for your arc-rated and flame resistant (AR / FR) clothing wardrobe. Scott Margolin, Vice […]

February 18, 2022

BREAKING: What’s the Latest from OSHA and PES on Arc Flash?

Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. More than 500,000 of Americans working on or near energized industrial electrical equipment today do not have protection from the deadly arc flash hazard, despite safety standards that have been […]

February 15, 2022

Proud to Protect Canada – Episode 1: Why Wear AR / FR Clothing?

We’re going back to basics to answer a fundamental question, “Why wear FR?” This topic transcends borders and applies to workers exposed to thermal hazards everywhere – so it’s critical to understand. It’s true, AR / FR clothing works as the “last line of defense” in the event of an […]

December 7, 2021

How to Layer for Warmth in the Winter

Creating a safe work environment for workers goes beyond ensuring compliance with industry safety standards related to both electrical arc and flash fire hazards – it also means guaranteeing workers are comfortable so that they can perform their duties properly. During the winter months, when workers find themselves in various […]

December 3, 2021

6 Tips to Combat Cold Stress

Think cold stress is only dangerous to the person becoming affected? Think again. Cold stress can dramatically slow reaction times – leading to an industrial accident. Scott Margolin, Vice President of Technical, shares six key tips for keeping yourself and others safe this winter: So what can you […]

November 16, 2021

The Dangers of Improper Wear: Episode 11 – Flammable Contaminants

You’re wearing the right PPE, and you’re wearing it properly – tucked, button, layered appropriately, etc. – what can go wrong? Well, if you’re exposed to a flammable substance, and your PPE is contaminated with such a substance, you are at risk of injury in the event of an arc […]

November 12, 2021

Can Arc Ratings Be Added to Calculate Protection?

Tyndale-made arc-rated and flame resistant (AR / FR) garments feature an external label to indicate the garment’s protective ratings. These ratings explain two critical pieces of information about your AR / FR clothing: The Calorie Rating (CAL) – the level of protection the garment delivers The PPE Category (CAT) – […]

November 9, 2021

The Dangers of Improper Wear: Episode 10 – Non-FR Hoodie Over AR/FR Clothing

If you’ve ever been tempted to reach for a non-FR hoodie to wear over your AR / FR to the jobsite on a chilly morning, you’re not alone: unfortunately, this mistake is common – especially in fall and spring, when it tends to be chilly in the morning and warms […]

November 2, 2021

The Dangers of Improper Wear: Episode 9 – The Chimney Effect

On the jobsite, head to toe coverage is critical for complete, lifesaving protection. In Episode 4 of The Dangers of Improper Wear – Untucked AR / FR Shirts, we looked at Flash Fire and Arc Flash Safety Standards to confirm that YES, you should always tuck in your arc-rated and […]

September 28, 2021

The Dangers of Improper Wear: Episode 8 – Why a Partially Unbuttoned AR Shirt May Not Fully Protect

Join our host, Scott Margolin, as he uncovers the consequences of failing to fully button your arc-rated or flame resistant (AR/FR) shirt. Improperly wearing your AR / FR clothing could be the difference between injury or leaving the jobsite safely if exposed to an arc flash or flash fire hazard. […]

September 24, 2021

Congress Urges OSHA to Act on AR / FR Clothing for Industrial Electricians

Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. An arc flash can reach temperatures four times hotter than the surface of the sun, but we can avoid virtually all fatal and catastrophic arc flash injuries with arc-rated and flame […]

September 21, 2021

The Dangers of Improper Wear: Episode 7 – Missing the AR Garment and Hazard Match

The common theme in our Dangers of Improper Wear series is ensuring that the garments you put on each day are worn properly and provide adequate protection against the hazards you face at work. Whether you’re faced with potential flash fire or arc flash hazards, wearing protective gear properly could […]

September 14, 2021

The Dangers of Improper Wear: Episode 6 – Consequences of Using the Wrong Rainwear Standard

Dress Confidently for Arc-flash Hazards with ASTM F1891-Rated Protective Rainwear Before you invest in arc-rated or flame resistant (AR / FR) rainwear it is important you’re aware of the standard that the garment passes to allow it to make its FR claim. Specifically, rainwear tested to ASTM D6413, the “Vertical […]

September 7, 2021

The Dangers of Improper Wear: Episode 5 – Non-AR Outerwear Over CAT 2 Garments

In today’s episode, we’re looking at the consequences of wearing flammable outerwear over AR garments. In this case, a flammable high-visibility vest and jacket over CAT 2 arc-rated (AR) dailywear. The video below graphically shows the consequences of wearing flammable clothing over quality AR clothing. So, be sure to watch […]

September 3, 2021

How do You Stay Up to Speed on Industry Information?

We’re so excited to celebrate Tyndale 500! Not quite the famous, 500-mile racecar event you may be familiar with. We recently reached (and quickly exceeded) 500 posts on HERE, our industry-leading blog! All thanks to you – our readers – for cheering us on! Unlike Daytona, we’re not stopping at […]

August 31, 2021

Dangers of Improper Wear: Episode 4 – Untucked AR/FR Shirts

Are You Required to Tuck-in Your AR / FR Shirt? The answer is YES, you should always tuck-in your arc-rated and flame resistant (AR / FR) shirts. We’ll show you why it’s so important in this week’s episode from our Dangers of Improper Wear series. Watch the video below for […]

August 24, 2021

Arc Week Season 2, Ep. 2: Hidden Dangers – 3 Things to Know About Layering Above CAT 2

In both shark diving and industrial electrical work, risks exist on a scale. As we learned in Episode 1, when we recognize a greater hazard, we must increase our personal protective equipment (PPE) – including our arc-rated (AR) clothing system and other PPE – accordingly. For hazards above CAT 2 […]

August 17, 2021

Dangers of Improper Wear: Episode 3 – Non-FR Meltable Bras

As part of our Improper Wear series, we’re looking at meltable base layers – which includes non-FR under shirts and anything else you might wear under your arc rated and flame resistant (AR / FR) shirt(s), such as a bra. The manikin shown in the video below is wearing a […]

August 13, 2021

Should Layered AR / FR Clothing Be Tucked in?

Thanks to everyone who submitted questions to be answered in our FR FAQ series. The question we’re answering today was submitted by Derek S. from Arizona. It is: Do I need to tuck in my arc-rated / flame resistant (AR / FR) clothing while wearing an AR / FR base […]

August 10, 2021

Dangers of Improper Wear: Episode 2 – Base Layers Should Not Melt!

Streetwear base layers are usually constructed from popular, man-made fabrics such as nylon, polypropylene, or spandex. When wearing these fabrics underneath arc-rated and flame resistant (AR / FR) clothing, you are at risk of serious injury, and we’re going to tell – and show –you why. When exposed to the […]

August 3, 2021

Dangers of Improper Wear: Episode 1 – Insect Repellents

Welcome to episode #1 of our Dangers of Improper Wear blog and video series! Let’s join our guide, Tyndale’s Vice President of Technical, Scott Margolin as he explains today’s improper wear topic: Insect Repellents. We focus on the differences between two insect repellents – and discover the impact each has on […]

July 27, 2021

Dangers of Improper Wear: Arc Flash

Mistakes happen. But mistakes made when it comes to how you wear your arc-rated and flame resistant (AR / FR) clothing can mean the difference between walking away from an accident and being seriously injured – or worse – in such an event. Follow our Dangers of Improper Wear series […]

July 23, 2021

How Does Tyndale Create Live Arc Flash Demonstrations?

Tyndale is known for being a leading provider of arc-rated and flame resistant (AR / FR) clothing. Did you know we also perform live arc flash testing to ensure the FR garments we sell perform as expected under real-world conditions? In today’s FR FAQ, we explore why and how Tyndale […]

July 16, 2021

How Does Tyndale Create Flash Fire Demonstrations?

Tyndale is known for being a leading provider of AR / FR clothing. Did you know we also perform flash fire testing to ensure the FR garments we sell perform as expected under real-world conditions? In today’s FR FAQ, we explore why and how Tyndale creates flash fire demonstrations. You […]

June 8, 2021

How It’s Tested: Episode 19 – ASTM F2178, Arc-Rated Eye and Face Protection

If you work alongside the arc flash hazard, chances are you’re used to wearing a balaclava and face shield – particularly when you’re completing PPE category (CAT) 1 and CAT 2 work. Have you ever wondered how these items are tested, or what standard ensures these items – as well […]

May 7, 2021

Does AR / FR Clothing Contribute to Heat Stress?

Summer is right around the corner, which means the heat is coming! With warmer weather comes questions around heat-related illnesses and whether or not wearing arc-rated and flame-resistant (AR / FR) protective apparel contributes to heat stress. What is heat stress? Heat stress occurs after you’ve been exposed to high […]

April 30, 2021

What Predicts Comfort in a Garment?

Wouldn’t it be nice to be able to make accurate predictions for the things that matter most? Tyndale can’t give you the winning lottery numbers but we can tell you exactly how to best predict comfort in your arc-rated and flame resistant (AR / FR) garments, which leads to other […]

April 16, 2021

Which Standards Should My FR Rainwear Pass?

If you’re specifying or purchasing arc-rated and flame resistant (AR / FR) rainwear, it’s critical that you know which standards are used to make compliance claims. Tyndale strongly recommends against accepting or purchasing FR rainwear that is only using ASTM D6413, the vertical flame test, to make those claims. Which […]

April 2, 2021

What Does OSHA Say About Home vs. Industrial Laundry?

As you may know, there two main program types when it comes to obtaining arc rated and flame resistant (AR / FR) clothing – Managed Direct Purchase with Home Laundry and Uniform Rental with Industrial Laundry. When you have one supplier telling you that their program is the best and […]

March 19, 2021

How Do I Know My FRC is Free of Harsh Chemicals?

A lot goes into making arc rated and flame resistant (AR / FR) garments, as you may have gathered after watching our How It’s Made series. And rightfully so – AR / FR clothing is your last line of defense, protecting you from injury in the event of an arc […]

February 19, 2021

Do AR / FR Shirts Need to be Tucked in?

If you’re required to wear arc-rated or flame resistant (AR / FR) clothing, the first step in protecting yourself is making sure you’re wearing the clothing properly. It’s important to note that aside from risking your safety by not wearing AR / FR correctly, you are also out of compliance […]

January 15, 2021

How Tyndale Ensures Consistent Sizing

Have you ever bought two of the same shirts, only to find one fits slightly different than the other? That is a quality assurance issue. At Tyndale our biggest goal is your satisfaction; we take our quality assurance measures very seriously and work hard to make sure you don’t experience […]

December 4, 2020

How Do I Know When My AR / FR Garment is Worn Out?

Disclosure: This blog post, originally published in 2020, was updated in 2023. For your safety, it’s important to repair or replace your arc-rated and flame resistant (AR / FR) clothing when it develops noticeable damage. But how do you know when your AR / FR garment is worn out? Do a […]

October 23, 2020

How Do I Determine a Safe Layered Arc Rating?

If you’re a frequent wearer of AR / FR clothing, you are familiar with what a garment’s arc rating means. If you’ve wondered how you can simply and easily increase your protection, the answer is layering. Layering is a powerful tool to achieve the protection you need with the comfort […]

August 10, 2020

Arc Week Season 1, Ep. 1: Great White Arcs Caught on Camera

Just as you wouldn’t swim with Great Whites without a shark cage, you don’t want to be caught THIS close to an arc without the right PPE. But you don’t have to simply take our word for it – sometimes seeing is believing. The arc rating standard is an excellent […]

July 29, 2020

Lotions, Oils and Sprays – Oh My!

Updated April 8, 2022 With summer weather comes the need to protect workers from seasonal hazards like sun exposure and disease-carrying biting insects. But when arc flash or flash fire is a risk, it’s important to think twice before reaching for the products you may use off-the-clock; unfortunately, some are […]

July 20, 2020

Understanding the Difference Between NFPA® 2112 & 2113 Standards

Two safety standards well-known in the Flame Resistant (FR) clothing industry are NFPA® 2112 and NFPA® 2113. While you may have heard of them, most important is understanding the difference between the two. NFPA 2112 specifies performance requirements of the FR fabrics, while NFPA® 2113 is a companion standard to […]

July 17, 2020

The ABC’s of FRC Repair

You’ve noticed a hole in your arc-rated or flame resistant (AR / FR) work shirt. Do you know what to do next? Luckily, knowing whether or not your AR / FR garment can be repaired is as simple as knowing your ABC’s: A) Acceptable Appearance: Consider whether or not your […]

July 2, 2020

Is it Safe to Disinfect Using Bleach Around FR Clothing?

The COVID-19 pandemic has brought cleaning and sanitation to the forefront of our minds, both at home and work. First and foremost, liquid chlorine bleach is prohibited from use on all flame resistant and arc rated fabrics and apparel in common use in the USA today. Neither Tyndale nor fabric manufacturers […]

June 30, 2020

VIDEO: COVID-19 Safety and Risks Presentation

Over the past 12+ weeks, Tyndale’s Vice President of Technical, Scott Margolin, has been entrenched in researching COVID-19, how it relates to flame resistant (FR) clothing, and how we can keep our customers – those required to wear FR clothing – safe on the job. In doing this research, Scott […]

June 12, 2020

What is the Impact of an Arc Flash?

For most people, going to work doesn’t involve being exposed to serious hazards. However, if you are a utility worker performing certain essential job functions, you are exposed to arc flash hazards on a regular basis. Companies are responsible for providing extensive safety training and workers are required to abide […]

May 18, 2020

What is Underwash and How is it Costing You?

When choosing an arc rated / flame resistant (AR / FR) clothing supplier, it’s important to understand your options and how they impact both your company and its employees. In this post and in the video below, we discuss what “underwash” means in a uniform rental with industrial laundry (“rental”) […]

April 22, 2020

FRC Safety During COVID-19: Why Sharing FRC and PPE is Risky – Part 2

As stated in our previous post, Why Sharing FRC and PPE is Risky, COVID-19 is spread by primarily by respiratory droplets; when an infected person coughs or sneezes, the droplets are transmitted to hard surfaces and fabrics, where they can remain viable for days. For this reason, it is important […]

April 20, 2020

FRC Safety During COVID-19: How to Disinfect Arc Flash Kit PPE

During the COVID-19 (“coronavirus”) pandemic, people in many vital industries are working around the clock to maintain our country’s critical infrastructure and the flow of essential products. In challenging times such as these, it’s more important than ever to stay calm and work smarter. It’s also vitally important to double-down […]

April 8, 2020

FRC Safety During COVID-19: FR Mask Care and Use

In response to COVID-19 and in an effort to help keep our customers safe, Tyndale has diverted a significant portion of our American manufacturing capacity to making FR surgical-style masks. In addition, we are sourcing masks from our key FR suppliers. The masks are made with flame resistant and arc […]

April 6, 2020

FRC Safety During COVID-19: How Soap Destroys COVID-19

Disinfecting arc rated and flame resistant (AR / FR) clothing and PPE begins and ends with soap and water – The Centers for Disease Control and Prevention (CDC) recommended method for disinfecting from COVID-19. When we think of the word “disinfecting” we typically think of popular products such as Clorox, […]

April 3, 2020

FRC Safety During COVID-19: What to Know When Using Alcohol as a Sanitizer

In these uncertain times, you can rely on Tyndale to provide the latest information on arc rated (AR) / flame resistant (FR) clothing safety during COVID-19. In the post and video below, we talk about what you should know when using alcohol as a sanitizer – and what you should do […]

April 1, 2020

FRC Safety During COVID-19: Disinfecting Leather Gloves

During the COVID-19 (“Coronavirus”) pandemic we have been told to wash our hands frequently to stop the spread of this deadly virus. But, how should you disinfect the leather gloves that you use on the job?

March 30, 2020

FRC Safety During COVID-19: Impact of Residual Bleach Spray on Flame Resistance

In these uncertain times, you can rely on Tyndale to provide the latest information on arc rated (AR) / flame resistant (FR) clothing safety during COVID-19. In the post and video below, we talk about the potential impact of residual bleach spray on flame resistance. For additional information on AR / […]

March 25, 2020

FRC Safety During COVID-19: Dried Bleach Residue and FRC

Along with the pandemic has come increased emphasis on reducing possible virus exposure by disinfecting work equipment, personal items, and commonly-touched surfaces. Chlorine bleach is a powerful, widely available, and cost-effective disinfectant that is being widely used to disinfect in line with CDC and WHO recommendations.

March 23, 2020

FRC Safety During COVID-19: Disinfecting FRC

Whether you are exposed to someone with the flu or more seriously, someone with COVID-19, how to wash your flame resistant clothing (FRC) remains the same. This blog post highlights the do’s-and-don’ts for disinfecting your FRC after a day in the field or coming in contact with the COVID-19 virus. […]

March 17, 2020

Is Uniform Rental with Industrial Laundry Necessary for AR / FR Clothing?

This is the second post in our series examining the industry’s shift away from uniform rental (“rental”) programs with industrial laundry for arc-rated and flame resistant (AR / FR) clothing, a closer look at misconceptions that sometimes lead companies to select rental for AR / FR clothing, and unintended consequences […]

March 13, 2020

Should I Wear FR Outerwear Over FR Clothing?

Yes! We published a blog post on what to wear under your flame resistant (FR) clothing, and today, we’re sharing what you should be wearing over your FR clothing. The answer: FR outerwear. During the cooler months, it’s important to wear outerwear to protect yourself from the elements and avoid […]

March 5, 2020

How Well Does an Arc Rated Garment Perform After 100 Washes?

We are frequently asked about the durability of flame resistance of arc rated garments. Do my arc rated garments lose their protective ability as I wash them after each use? All FR and AR garments sold by Tyndale are guaranteed flame resistant for the service life of the garment. To […]

March 2, 2020

Tyndale’s Laundry Options

What Laundry Option Works Best for Your Company? Everyone wants to be comfortable in their work clothing, and the single largest driver of comfort is choice. When people select their own garments they are more likely to wear them, and follow proper use and care instructions. Tyndale’s managed allowance programs […]

February 27, 2020

Does My AR/FR Rainwear Meet The Right Standard?

Note: We cover this topic in a more recent post: Which Standards Should My AR / FR Rainwear Pass? Shopping for arc-rated and flame resistant (AR/FR) rainwear? Take a VERY close look at the label. Some rainwear sold on the market as flame resistant is tested and labeled to comply […]

February 20, 2020

How Well Does Tyndale’s Versa Line Perform During An Arc Flash?

Tyndale recently debuted our new clothing line, The Versa Collection. This line of Tyndale-made FRC focuses on comfort and style while delivering the safety and performance you expect to keep you safe on the job. Curious to know how this contemporary line of FR clothing fared during a real-word arc […]

February 13, 2020

What Should I Wear Under My FRC?

This is a question we get fairly often, and for good reason: it’s not uncommon to wear an undershirt off the clock, for added comfort or warmth. How does this common practice apply in an energized work environment? What do the standards say, and how do the remaining options rate […]

February 7, 2020

What Does Arc Flash Testing Look Like? An Introduction to Tyndale’s Newest Video Series

We believe seeing is believing. That’s why we continually invest in real world demonstrations to visualize why wearing arc-rated flame resistant clothing – and wearing it properly – matters. As part of this commitment, we are pleased to share our latest Arc Flash Video Series. These test videos display the […]

January 28, 2020

What Should I Look For On FR Clothing Labels?

Reading labels on flame resistant (FR) clothing can be confusing. How do you know for sure that the clothing you have offers the protection you need? FR clothing is required to have specific information on its label in order to comply with industry safety standards. In this post, we share […]

January 20, 2020

Tyndale’s Top 10 Blog Posts of 2019

Happy New Year, and welcome to 2020! Our members here at Tyndale hope your year is filled with joy and prosperity. Join us as we recap our most popular blogs from 2019, detailing innovation and education in the world of FRC.

January 16, 2020

What is Cold Stress?

Cold winter weather can be downright dangerous, and it is important to know the risks to workers and how to stay protected from harsh winters. According to the National Weather Service, 30% of injuries during winter storms are a result of being unprepared with adequate clothing. Depending on where you’re […]

November 12, 2019

Tyndale Returns to KEMA for More Live Arc Flash Testing

Nothing drives home the importance of wearing arc rated, fire resistant (AR/FR) clothing on the job than seeing what happens when non-FR clothing is subjected to an actual arc flash. Back in 2017, Tyndale broke new ground by hosting, along with Westex, an utterly unique event at the KEMA – […]

October 25, 2019

Is Bug Spray Safe to Use on FR Clothing?

There are many questions around bug spray and FRC: Is it safe? Which ones are safe? How do I know for sure? Read on to find answers and watch our video below, featuring Tyndale’s Vice President of Technical, Scott Margolin, as he provides clarity in just over a minute. Is […]

October 21, 2019

NEW WEBINAR – Seeing is Believing: Real-World Lessons in FRC

They say seeing is believing. So, if you still have any questions about the importance of wearing FR clothing on the job, you need to see this webinar. It features HD video of arcs in real 480V equipment at KEMA Powertest AND video of full scale, outdoor flash fires shot […]

August 20, 2019

Does Moisture Impact Protection Levels of FRC?

Whether the result of perspiration or precipitation, it’s not at all unusual for the FR clothing worn by workers in the field to get damp. How does that moisture impact the level of protection you get from the garment? As it turns out, there is more than one answer to […]

May 28, 2019

NFPA 2112 Pass/Fail Test Series Part 1: The Manikin Test

Welcome to our four-part blog series about the pass/fail testing requirements for NFPA 2112 compliance. NFPA 2112 is also known as the “flash-fire standard,” and there are four tests which a garment or fabric must pass to receive this accreditation. They are: The Manikin Test The Vertical Flame Test The […]

April 9, 2019

How Do Flame Retardants Work?

Many people confuse the terms “flame retardant” and “flame resistant.” Flame resistance is the characteristic of a substance not supporting combustion in air (not burning), while a flame retardant is a product that is added to a flammable substance to achieve the property of flame resistance. In the world of […]

March 26, 2019

March 26, 2019

Learn About FRC Trends and What the Future Holds – Webinar, April 25

On April 25, Scott Margolin, Tyndale Company’s VP of Technical will be presenting a webinar entitled, What’s next in FRC? A peek into comfort, emerging trends, & the future of FR and arc rated clothing. The webinar, scheduled for 1 p.m. ET (Noon, Central time and 10 a.m. on the […]

February 26, 2019

February 26, 2019

Do OSHA 1910.269 PPE Rules Impact Oil, Gas, and Other Industries?

OSHA’s 1910.269 ruling for the electric utility industry defines FR clothing as PPE–similar to 2010’s OSHA 1910.132 Enforcement Policy Memo regarding protection from flash fire in oil and gas well drilling, servicing, and production-related operations. In fact, the Preamble to the 1910.269 ruling introduces additional commentary from OSHA that paints […]

February 19, 2019

February 19, 2019

FR Clothing Care & Maintenance: 3 Things to Know

Flame resistant (FR) clothing is considered “the last line of defense” in the event of an arc flash or flash fire, meaning FR clothing is there to protect you from injury when all other safety measures and precautions have been unsuccessful in preventing an incident. Watch as Tyndale VP of […]

February 6, 2019

February 6, 2019

The Power of Layering, in the Palm of Your Hand!

If you’re thinking about layering arc-rated flame resistant (FR) garments to achieve a desired level of arc flash protection, please remember – it’s not safe to simply add the arc ratings together. The only way to know the true level of protection provided by the layers combined is to arc […]

January 30, 2019

Tyndale’s 2018 Top 10 Blog Posts

We hope your new year is off to a wonderful start! 2018 was a great year for innovation and education in the FR clothing industry. We’ve gone through our blog and highlighted some picks just for you. Here’s a look back at our top-10 posts from 2018. 1) Witness the […]

January 18, 2019

What Is the Difference Between Inherent and Treated FR?

“Inherent” and “treated” are the two terms used most to distinguish between FR fabrics. The difference between treated and inherently flame resistant fabrics relates to the process used in making the final product flame resistant. Watch as Tyndale’s Vice President of Technical, Scott Margolin further explains the differences between the […]

January 8, 2019

January 8, 2019

Important Changes to NFPA 2112 – 2018 Edition

NFPA 2112, Standard on Flame Resistant Clothing for Protection of Industrial Personnel Against Short-Duration Thermal Exposures from Fire, was revised and an updated edition was issued earlier this year. Below, we provide an overview of the important changes: Updated Title and New Terminology One of the biggest changes in the […]

October 3, 2018

What are NFPA Standards?

You may wear PPE certified to NFPA standards, or undertake work regulated by NFPA codes everyday. But what is NFPA and what are NFPA standards? NFPA is short for the National Fire Protection Association, a nonprofit organization committed to reducing injury, death, and other loss stemming from fire, electrical, and […]

October 2, 2018

VIDEO: FR Rainwear vs. Non-FR Rainwear in a Flash Fire

Spoiler alert: you DO NOT want to be caught wearing non-FR rainwear during a short duration thermal exposure or flash fire. Even some rainwear garments that are labeled as flame resistant (FR), compliant with ASTM D6413 are dangerous to wear if you’re exposed to a flash fire hazard. In this […]

September 24, 2018

The Cost of Providing Arc Flash Protection

So far in this series, we have explored the many costs of an arc flash incident, the frequency of arc flash incidents, and the economic costs involved. Now we’d like to take a look at how you can mitigate the damage – both personal and economic – in the event […]

September 13, 2018

Not Wearing FR? See Why You Should.

If you’ve never witnessed a flash fire incident first-hand, it can be difficult to fully appreciate just how important it is to be fully protected by flame resistant clothing on the job. The direct injuries caused by the flames themselves can certainly be serious. But due to the relatively short […]

August 15, 2018

The Many Costs of an Arc Flash Incident

Being caught in an arc flash incident can result in devastating primary costs on an unprotected worker. At best, an employee’s life and that of their family is turned upside down as they undergo a long, painful recovery and rehab process. At worst, a family is left coping with the […]

June 21, 2018

Witness the Power of an Arc Flash

Tyndale, in cooperation with Westex by Milliken, recently held an educational event at KEMA Laboratories in Chalfont, Pennsylvania. In the morning, invited guests attended seminars by industry experts on topics such as safe work practices, changes to NFPA 70E, and how science is the key to FR safety, as well […]

May 30, 2018

May 30, 2018

Managing Garment Inspection and Turn-in

This is the fourth post in a five-part series sharing common-sense strategies that have worked for other companies when they have moved on from rental contracts. Read our first post, and follow along with our series: Rental Laundry Programs, Understanding Program Responsibilities, and Auditing the Final Inventory to learn more about each step. […]

April 16, 2018

The Risk of Not Wearing Proper PPE

This is the final post in a four-part series exploring factors that could contribute to an arc flash incident, based on the experience of arc flash survivor and safety advocate, Brandon Schroeder. In the first three posts in the series, we talked about behavioral and company culture-related factors that could […]

March 21, 2018

NFPA 70E 2018 – What’s New?

NFPA 70E has since been revised in 2021, though updates pertaining to AR / FR clothing were minor. NFPA 70E requirements for safe work practices protect personnel by reducing exposure to major electrical hazards. Originally developed at OSHA’s request, NFPA 70E helps companies and employees avoid workplace injuries and fatalities […]

March 15, 2018

March 15, 2018

How Daily Wear Programs Solve Layering Challenges

This is the third post in a series of five posts comparing and contrasting task-based and daily wear approaches to arc-rated (AR) clothing programs. Check out our first post here, and our post exploring liability issues here. Next, we take a closer look at issues with monitoring and productivity, and key takeaways. As […]

February 28, 2018

How Experience Leads to Risky Behavior

This is the first post in a four-part series exploring factors that could contribute to an arc flash incident, based on the experience of arc flash survivor and safety advocate Brandon Schroeder. Picture this: You’ve been a licensed electrician since you were 23 years old, with five years as an […]

February 26, 2018

The Challenge of Finding Proper Fitting FRC

At Tyndale, we understand the importance of FRC that fits properly. It goes beyond safety. When they’re comfortable, workers can be fully engaged in work activities – which drives safety and productivity. You’re looking for garments that are large enough to offer freedom of movement and the “air gap” […]

February 9, 2018

Don’t Risk It! An Arc Flash Survivor Speaks Out.

On August 24, 2011, Brandon Schroeder was working on a job site handling an electrical task that he had performed without incident dozens of times before. Only this time, things didn’t go according to plan – and Brandon was caught in the blast from a massive arc flash. Brandon suffered […]

December 21, 2017

How to Wear FR Clothing

The first step in protecting yourself from arc flash and flash fire hazards on the job is wearing arc-rated flame resistant (FR) clothing. However, if you’re not wearing your FR properly, you could be leaving yourself at risk for serious injury. In fact, there are some cases in which wearing […]

December 6, 2017

How to Wash FR Clothing

August 18, 2016

What Standard Governs Arc Flash Protective Rainwear?

ASTM F1891, Standard Specification for Arc and Flame Resistant Rainwear, establishes minimum performance specifications, test methods, and other suggested information – including a sizing guide and purchasing specification – for rainwear used to protect workers from momentary exposures to arc flashes or flame.

March 3, 2016

Who is Responsible for FRC Use, Care, and Maintenance?

What do industry standards say about flame resistant clothing (FRC) use, care, and maintenance in oil and gas applications? And who is responsible for making sure garments meet those expectations? What tools are available to employers to support compliance with the requirements? In this blog post, we explore and compare […]

January 26, 2015

General Care & Maintenance Video for PPE/FRC

January 26, 2015

Training Video: FRC Care, Maintenance and Inspection

While many see OSHA’s update to standard 1910.269 as something that only affects the electric utility industry, OSHA’s changes are far greater reaching than many people may expect. In fact, the Preamble to OSHA’s recently updated standard 1910.269 ruling gives insight on the agency’s stance on proper care and maintenance […]

January 22, 2015

OSHA 1910.269 Resource Guide on Laundering FRC

OSHA’s update to standard 1910.269, which took effect in 2015,clarifies and expands the employer’s responsibility to provide and maintain appropriate arc-rated clothing to employees based on reliable estimates of workplace hazards. Tyndale can help employers understand key aspects of OSHA’s revised ruling to standard 1910.269 as it relates to FR […]

October 30, 2014

Tyndale PPE Guidance Featured in ISHN October 2014

Read Tyndale’s article, featured on page 44 of the October 2014 edition of Industrial Safety & Hygiene News (ISHN) Magazine, for guidance to employers looking to understand both OSHA’s 2014 update to 29 CFR 1910.269 and OSHA’s view of care and maintenance for PPE in a broader context—beyond the utility […]

July 31, 2014

Tyndale FRC Care & Maintenance Training Video

July 31, 2014

1910.269 TRAINING VIDEO: FR Clothing Maintenance and Inspection

OSHA has published the final rule revising 29 CFR 1910.269 and 1926 Subpart V. This update is expected to save more than 20 lives and prevent 118 serious injuries each year by clarifying and expanding the employer’s responsibility to provide and maintain appropriate arc rated clothing for employees based on […]

June 13, 2014

June 13, 2014

Final OSHA 29 CFR 1910.269 Update: Care, Maintenance and Laundering of FR Clothing

During Electrical Safety Month in May, Tyndale began discussing key aspects of OSHA’s revised ruling of 1910.269 as it applies to FR clothing and has aimed to help employers understand its impact and how to properly protect employees. In this post, Tyndale identifies the last key component of OSHA’s final […]

June 4, 2014

Bug Repellent, DEET, and Your FR Clothing

The weather is warming up, which means the concern over pesky insects is growing. You’ll want to stay protected from bugs, but more importantly, remain safe in your FR clothing. As we’ve covered in the past, Tyndale does not recommend applying insect repellent with DEET (N, N-diethyl-meta-toluamide) to flame resistant […]

January 21, 2014

January 21, 2014

Download Tyndale’s Sample FRC Clothing Retirement Policy

We often get questions on best practices regarding useful wear life of FR clothing and when to retire used or older garments. To ensure that flame resistant clothing maintains protective properties, workers should retire their flame resistant clothing if one or more of the following wear indicators appear on a […]

November 27, 2013

4 Tips for Washing Your FR Outerwear

It’s that time of year again when many of us need to wear jackets to stay warm. One of the biggest risks in the FR industry is outerwear soiled with flammable contaminants, such as oil or grease. If exposed to flame or electric arc, flammable soil could ignite and continue […]

September 20, 2013

September 20, 2013

Using Fabric Softener with FRC Clothing: Should You or Shouldn’t You?

This blog post is the third, and final, part of a 3-part series. Previously in September, we covered How to Wash FR Clothing and its Useful Wear Life and Laundering Myths: Is Lint Contamination Really a Threat to Your FR Clothing? Using fabric softener on FRC has been questioned over […]

September 18, 2013

September 18, 2013

Laundering Myths: Is Lint Contamination Really a Threat to FR Clothing?

This blog post is the second of a 3-part series. Click here to read the previous post on How to Wash FR Clothing & Useful Wear Life. Coming up, we will also cover Using Fabric Softener with Your FRC. We’ve all experienced having lint balls on our clothing or in […]

September 10, 2013

3 Tips on How to Wash FR Clothing and its Useful Wear Life

This blog post is the first of a 3-part series. Later in September, we will also cover how to wash FR clothing with fabric softener and lint contamination, or when non-FR garments are washed with FRC. We often get questions on best practices regarding how to wash FR clothing and […]

Protective Boots

By Wearer Count:

A Solution for Every Company Size

Industries

Hazards

Technical

Videos

Industry Insights

Customer Support

Watch Tyndale, Ariat & PBR Stars

Visit a Store

Get Started

Careers With Tyndale

Protective Boots

By Wearer Count:

A Solution for Every Company Size

Industries

Hazards

Technical

Videos

Industry Insights

Customer Support

Watch Tyndale, Ariat & PBR Stars

Visit a Store

Get Started

Careers With Tyndale

Protective Boots

By Wearer Count:

A Solution for Every Company Size

Industries

Hazards

Technical

Videos

Industry Insights

Customer Support

Watch Tyndale, Ariat & PBR Stars

Visit a Store

Get Started

Careers With Tyndale

Protective Boots

By Wearer Count:

A Solution for Every Company Size

Industries

Hazards

Technical

Videos

Industry Insights

Customer Support

Watch Tyndale, Ariat & PBR Stars

Visit a Store

Get Started

Careers With Tyndale