Series Archives - Tyndale USA

August 12, 2026

The Best of Arc Week: The Five Episodes Every Electrical Worker Should See

This year, we’re revisiting the best of Arc Week with five fan-favorite, must-watch arc flash safety episodes that remain critical following the latest OSHA arc flash guidance—and have only grown more important with time due to today’s rapidly-increasing demand for electricians.

October 31, 2025

FR FAQ: How Should My FR Clothing Fit?

One of the most common questions we hear about arc-rated and flame resistant (AR / FR) clothing is: How should it fit? Is a tight, snug, or loose fit recommended? Before we dig into our answer, our stance on this topic is firm: When it comes to AR/FR clothing, proper fit […]

October 24, 2025

Does Fabric Construction Affect Arc Rating?

A great deal of science and attention to detail goes into engineering arc-rated and flame resistant (AR / FR) clothing. Even seemingly small details – like the way a fabric is constructed – can have a big impact in the final product. In fact, the characteristics of an AR / […]

October 17, 2025

Is Hi-Vis Tape Flame Resistant?

As high-visibility (hi-vis) garments become increasingly common in the industry, we are receiving new questions about these products. Hi-vis tape is designed to make workers more visible in low-light or high-traffic environments. But is it flame resistant? Scott Margolin, Vice President of Technical, explains:

October 10, 2025

How to Layer Arc-Rated Clothing for 20-Cal Protection

When performing high-risk electrical work, it’s critical that your personal protective equipment (PPE) exceeds the potential incident energy of an arc flash associated with that task. For work that requires a category (CAT) 2 level of protection—defined by NFPA 70E as a calorie rating of 8–24 cal/cm²—layering arc-rated and flame […]

August 22, 2025

Arc Week Season 6, Ep. 5 – Belief: “Fabric Softener & Lint Ruin Arc-rated PPE Effectiveness.”

Over the years, concerns about fabric softener, flammable lint, and laundry methods have circulated widely in the electrical safety industry. But are these concerns valid—or are they BS?

August 21, 2025

Arc Week Season 6, Ep. 4 – Belief: “Bleach Destroys My Arc-rated PPE.”

You’ve likely heard the claims: “Bleach ruins FR clothing,” or “Only industrial laundering is safe.” Since arc-rated and flame resistant (AR / FR) garments are critical safety gear, concerns about their performance—especially when it comes to care and maintenance—are understandable. We took this belief to the lab and tested it […]

August 20, 2025

Arc Week Season 6, Ep. 3 – Belief: “We Don’t Work Energized.”

Think you’re safe to skip arc-rated (AR) PPE because the power is off? Think again. Before you trust the hearsay, watch this — it could be the difference between walking away and a life-changing injury (or worse!).

August 19, 2025

Arc Week Season 6, Ep. 2 – Belief: “Who Needs Arc-Rated PPE If the Arc Blast Kills You?”

Without question, an arc flash causes a loud bang. But is the resulting shockwave strong enough to blow someone back, damage internal organs, or cause other injuries?

August 18, 2025

Arc Week Season 6, Ep. 1 – Belief: “I Don’t Need Arc-rated PPE – Cotton Is Fine.”

One of the oldest claims floating around out there is “I don’t need arc-rated (AR) PPE – cotton is fine.” But is it true? We put this claim under the microscope to reveal the truth:

July 18, 2025

Bull Sharks and Bull$#!t: Arc Week Season 6

Like bull sharks, arc flash protection is often misunderstood — and just as dangerous if you get it wrong. Inspired by a popular TV show, this season we’re testing some dangerous claims about both. Is cotton safe? Does low voltage = low risk? Could an arc blast be fatal? Can […]

April 25, 2025

Do I Need AR PPE for Low Voltage Work?

When you hear “low voltage,” it’s easy to assume low risk — but that assumption can be dangerous, even fatal. Most arc flash injuries occur on systems rated at 480 volts and below, where electrical work is frequent, and PPE is often overlooked due to the false belief that “low […]

April 17, 2025

Do I Need AR PPE to Throw a Breaker?

As the industry absorbs OSHA’s new arc flash safety guidance and makes changes to comply and better protect workers, one question we’ve often received is: “Do I really need PPE just to throw a breaker?”

April 11, 2025

De-Energized or Not? OSHA Clarifies Arc Flash & Electrical Safety Rules

We’re continuing our series on OSHA’s new arc flash guidance by tackling a common question: What constitutes de-energized work? In the electrical industry, it’s common to hear: “I don’t work energized, so I don’t need personal protective equipment (PPE).” But that assumption can be dangerous. OSHA and NFPA 70E provide […]

April 4, 2025

The Truth About Lockout/Tagout and Arc-Flash PPE

We’re continuing our series on OSHA’s new arc-flash guidance by tackling a common question: Do you need arc-rated(AR) personal protective equipment (PPE) during the lockout/tagout (LOTO) process? It’s easy to assume that LOTO is de-energized work – but that’s not actually the case. Every step of the LOTO process must […]

March 28, 2025

Do I Need AR PPE to Use a Voltmeter or Multimeter?

In the past, many inside electricians didn’t wear arc-rated (AR) clothing or personal protective equipment (PPE) because they believed they weren’t working on energized equipment. But OSHA’s updated arc flash safety guidance changes previous assumptions about what constitutes de-energized work.

March 14, 2025

Do I Need Arc-Rated PPE to Open a Residential Breaker Panel?

OSHA released new Arc Flash Guidance in November 2024 to ensure that arc-rated (AR) clothing and equipment is provided to and worn by anyone working on or near energized equipment. In particular, this guidance clarifies that even low-voltage systems, including 120/208V, can generate arc flashes with more than enough energy […]

March 6, 2025

Do I Need Arc-Rated PPE to Open an Energized Breaker Panel?

If you’re doing any kind of electrical work, you may be exposed to arc flash hazards. Even environments typically considered “low risk,” like opening an energized breaker panel, can pose the threat of an arc flash incident and cause life-threatening harm. That’s why OSHA’s latest Arc Flash Guidance, released in […]

January 15, 2025

Fundamentals of Arc Flash: Introduction

In November 2024 OSHA released new guidance to improve arc flash safety amongst commercial, industrial, and residential electricians and operators, maintenance, and others working on or near exposed energized electrical parts. Behind the new guidance is a chilling fact: preventable arc flash injuries continue to occur amongst inside electricians at […]

January 15, 2025

Combustible Dust Series: Part 8 – NFPA 660: The New Standard for Combustible Dust

As of December 6, 2024, NFPA 660 Standard for Combustible Dusts and Particulate Solids is the presiding standard for combustible dust hazard prevention and safety information. It is a consolidated standard, which combines information from existing standards NFPA 61, NFPA 484, NFPA 652, NFPA 654, NFPA 655, and NFPA 664. […]

October 11, 2024

NFPA 70E’s “Big 3” Tenets for Worker Protection

NFPA 70E Standard for Electrical Safety in the Workplace is the primary standard for commercial and industrial electricians in the United States today, and we’re often asked what it says about protecting workers. Though the answer is more comprehensive and detailed than can be digested in one sitting, its core […]

October 4, 2024

Understanding AR/FR Garment Compliance vs. Protection

It may be surprising, but compliance and protection aren’t always synonymous – especially when it comes to arc-rated and flame resistant (AR/FR) garments. Put simply, compliance refers to what we must do to meet regulatory requirements, such as OSHA guidelines or what is outlined within standards like NFPA 70E or […]

September 27, 2024

Why is FR Clothing so Expensive?

Arc-rated and flame resistant (AR / FR) garments are more expensive than everyday clothing due to the extensive time, resources, and science that go into their design and production. Tyndale’s How It’s Made series offers a detailed look at the process, from fiber and yarn weaving to engineering AR / […]

September 19, 2024

What is the Maximum Body Burn Percentage that Still Passes NFPA 2112?

For over 25 years, NFPA 2112—the “flash-fire standard”—has been essential in protecting workers from flash fire hazards by establishing minimum performance criteria for flame resistant (FR) garments. NFPA 2112 sets clear guidelines for testing FR garments and the components that comprise the garments, including the fabric. In order to be NFPA 2112 […]

September 6, 2024

Understanding NFPA 2112 Compliance vs. Certification

We’re often asked what the difference is between NFPA 2112 compliance and NFPA 2112 certification. As you may know, NFPA 2112 – the “flash-fire standard” – provides minimum performance criteria and sets clear guidelines for testing flame resistant garments and the components that comprise the garments, such as the fabric […]

August 30, 2024

Risks of Buying AR / FR Clothing Online: What You Need to Know

Online shopping has become the go-to method for purchasing almost anything, especially since the pandemic. However, with the online retail boom, some marketplaces – including major platforms like Amazon – are turning into something of a “Wild West,” where there has been a surge in counterfeit and fraudulent items for […]

August 23, 2024

Arc Week Season 5, Ep. 5: Does AR / FR Clothing Protect in a DC Arc?

See how flammable and arc-rated and flame resistant (AR / FR) clothing fare in direct current (DC) arcs. Our tests reveal that DC arcs pose similar risks as alternating current (AC) arcs – and that AR / FR clothing provides effective protection against both. Please be aware: this video contains […]

August 22, 2024

Arc Week Season 5, Ep. 4: Top 4 Causes of Arc Flash Injury – Working Energized Without PPE (#1 and #2)

The top two causes of arc flash injury and fatality in the US share a commonality: the victims weren’t wearing any PPE at all. Correct misconceptions, combat complacency, and challenge the status quo to strike these causes from the list: Please be aware: this video contains graphic content and may […]

August 21, 2024

Arc Week Season 5, Ep. 3: Top 4 Causes of Arc Flash Injury – Task-Based PPE Not Worn (#3)

Imagine: you’re on a job, facing a deadline, and your PPE isn’t handy. This isn’t just a hypothetical, it’s the #3 cause of arc flash injury and fatality in the US. Here’s why this scenario is common with task-based PPE: Please be aware: this video contains graphic content and may […]

August 20, 2024

Arc Week Season 5, Ep. 2: Top 4 Causes of Arc Flash Injury – Improper Wear (#4)

The vast majority of negative arc flash outcomes are attributable to four main causes – allowing us to chart a course to a safer future. Our host Scott Margolin reveals the #4 leading cause to curtail at your company: Please be aware: this video contains graphic content and may not […]

August 19, 2024

Arc Week Season 5, Ep. 1: Why Arc Rated Clothing Matters – Don’t Wear Fuel

Why Flammable Clothing Fuels Injury When it comes to thermal hazards like arc flash, flash fire, combustible dust, and others the danger often isn’t just the event itself—it’s the igniting of flammable clothing. These events are brief and highly directional, and if your clothes catch fire the consequences are severe. […]

August 16, 2024

Hammering Home the Point: Arc Week Season 5

The wait is over—it’s that time of year again! Welcome to Arc Week Season 5: Hammering Home the Point. So, what’s the big deal? This season, we’re diving back into the basics to emphasize why arc-rated and flame resistant (AR / FR) clothing are so crucial. Through a series of […]

August 2, 2024

EH-Rated Boots – What You Should Know about Maintenance and Testing

For anyone working in an energized electrical environment, wearing the proper protective gear is a must – including the appropriate footwear! That’s where electrical hazard (EH) rated boots come into play! These boots are designed to protect you from potential electrical hazards. Join our Vice President of Technical, Scott Margolin, […]

July 26, 2024

Does FR Clothing Shrink?

A common question we’re asked about arc-rated and flame resistant (AR / FR) clothing is, “Does it shrink when laundered?” While all knit garments have the potential to shrink after washing and drying, modern AR / FR clothing is much more resilient than it was a decade ago. Today’s quality […]

July 19, 2024

How Long Does FR Clothing Last? Understanding the Lifespan of Arc-Rated and Flame Resistant Clothing

One of the most frequent questions we receive about arc-rated and flame resistant (AR / FR) clothing concerns longevity: How long does the clothing last? Below, our Vice President of Technical, Scott Margolin, explains why this question has more nuance than you might think. How long does FR clothing […]

June 28, 2024

Bug-Repellent FR Clothing: Your Shield Against Insect Hazards

When working outdoors, protection can mean guarding against thermal hazards like arc flashes and flash fires. However, it’s also important to have garments that defend against smaller – but also dangerous – threats posed by insects. At Tyndale, we understand the importance of comprehensive safety, which is why we’re proud […]

May 31, 2024

What is an “Adequately Rated” Meter According to NFPA 70E?

NFPA 70E is a vital standard for establishing practical and safe workplaces in order to avoid electrical hazards. Within NFPA 70E, the phrase “adequately rated meter” pops up frequently. The term “adequately rated” is often misunderstood throughout industries that follow NFPA 70E and use electrical testing meters. Read on to […]

May 17, 2024

Understanding What Accessories Should NOT Cross an Arc Flash Boundary

When it comes to electrical safety, understanding and adhering to strict guidelines is paramount to protecting yourself from potential hazards. When working near energized electrical components, it’s crucial to know what is and isn’t permissible within the protection boundaries set forth by standards such as NFPA 70E, Standard for Electrical […]

May 10, 2024

Empowering Women in Energy: Tyndale’s Commitment to Safety and Inclusivity

In today’s dynamic workplaces, diversity, inclusion, and safety are paramount. At Tyndale, a woman-owned business dedicated to providing high-quality protective apparel, we recognize the pivotal role that women play in the workforce, particularly in traditionally male-dominated energy industries. That’s why we were thrilled to extend a warm welcome to members […]

May 3, 2024

Wearing AR/FR Clothing: A Story of Survival and Protection

Arc-rated and flame resistant (AR / FR) clothing is indispensable for workers facing arc flash, flash fire, or combustible dust hazards due to their brief and directional nature. Unlike flammable clothing that can ignite and continue to burn, AR / FR garments prevent ignition and offer vital insulation against thermal […]

April 26, 2024

Why You Should NOT Wear Athletic Shirts Underneath Your AR / FR Garments

It’s critical to wear arc-rated and flame resistant (AR / FR) clothing while working in energized environments. Equally important, however, is what not to wear underneath your protective clothing, specifically moisture-wicking athletic wear. Tune in to the video below as our Lead Corporate Safety and Technical Trainer, Jason Brozen explains […]

April 18, 2024

PFAS and AR/FR Clothing: 3 Things to Know

PFAS is a term you may have heard in the news recently. The Environmental Protection Agency (EPA) describes PFAS as “a series of man-made chemical compounds that persist in the environment for long periods of time.” Are these “forever chemicals” present in arc-rated and flame resistant (AR / FR) clothing? […]

March 28, 2024

Empowering Herstory: Crafting Autonomy – Women in Apparel Design

In this last episode of Empowering Herstory, we revisit Susan Glynn’s story from our Women in Power series. Susan boasts a remarkable 20-year tenure at Ariat, a women-owned performance apparel brand, and reminisces on the inspiration that has driven her to excel in her current position as Ariat’s Vice President […]

March 22, 2024

Empowering Herstory: How Female Linemen are Empowering Themselves to Break Barriers

In honor of Women’s History Month, we’re revisiting our Women in Power series. This week, we reflect on our interview with Alicia Rogers, where she discusses what it’s like to be a woman working in a male-dominated industry. Addressing the challenges she faces as a woman in the utility […]

March 15, 2024

Empowering Herstory: Embracing Responsibility as a Local Gas Representative

In honor of Women’s History Month, we’re revisiting our Women in Power series. Revisit our conversation with Kori Wormsbecker, a journeyman at Avista Utilities. Up until her apprenticeship, Kori worked in the call center at Avista. So, when we asked how she balanced her home life, including parenting her daughter […]

March 8, 2024

Empowering Herstory: Independence as a Woman in the Power Industry

In honor of Women’s History Month, we’re revisiting our Women in Power series. Tyndale has made it our personal mission to uplift and empower women leading the way in careers where arc-rated and flame resistant (AR/FR) clothing is required. Revisit our conversation with Maureen Miller, a Wisconsin-based lineman, and learn […]

February 16, 2024

Enespro 40cal Suit Faces Off Against DC Arc – Witness the Power!

Navigating energized electrical environments comes with the inherent risk of direct current (DC) arc flash hazards. When working in this environment, it is critical to be equipped with proper PPE that ensures your safety. Curious about the resilience of an Enespro arc flash suit when it encounters an oncoming DC […]

February 8, 2024

Your “Easy Button” for NFPA 70E Safety Training

Do you know the ins and outs of NFPA 70E? Intimidated, or not sure where to begin? Start here! Whether you’re a beginner or you have ample field experience, our new video-based training series NFPA 70E Made Easy is for you. This “crash course” delves into the intricacies of NFPA […]

January 26, 2024

Trending in 2023: Tyndale’s Top Videos

Each year, our VP of Technical, Scott Margolin, brings our viewers relevant industry education through our technical video library. Scott’s extensive experience and knowledge provide Tyndale with unmatched technical expertise. As our Vice President of Technical, Scott serves as Tyndale’s lead resource for any technical questions or issues that arise. […]

January 19, 2024

Trending in 2023: Tyndale’s Top Blogs

Each year, we leverage our industry-leading blog and videos to provide in-depth educational content. Whether it’s answering technical questions or addressing common safety concerns, we’re dedicated to updating management and workers on the latest developments in the arc-rated and flame resistant (AR / FR) clothing industry. Our posts are backed […]

January 16, 2024

Arc Bites: Energized Work – Great Power, Great Responsibility

Years ago, remembers William Watson – Vice President of Safety at Miller Electric and Chairman of the NECA Large Contractor Safety Group, NFPA 70E required electricians to send copies of paperwork for completed energized work to their employers for retention. In those days, William often observed inaccuracies in the paperwork […]

January 9, 2024

Arc Bites: Defending Against the Jaws of Arc Flash with Equipment Maintenance

“There’s not an electrician in the world that can walk up to a gray panel and say, oh, it looks like the incident energy for this piece of equipment would be about… let’s call it a seven. You don’t know. You’ve got to do a coordination study. You need to […]

December 5, 2023

Arc Bites: Easy Does It – How to Pick the Right PPE Provider

“As a safety professional, I don’t have time to be in the clothing business,” William Watson, Vice President of Safety at Miller Electric and Chairman of the NECA Large Contractor Safety Group, said during the round table discussion in the Arc Week Season 4 finale. Facing service and safety issues […]

December 1, 2023

DC-Cember: Unwrapping the Dangers of Direct Current Arcs

Tyndale is proud to present our new December video series, DC-Cember: Unwrapping the Dangers of Direct Current Arcs, where we emphasize the importance of proper protection against direct current (DC) hazards. Through our own video footage, we reveal the cold, hard truth to electrical workers everywhere and how they can […]

November 28, 2023

Arc Bites: Learning from Adversity – Navigating the Aftermath of an Arc Flash Incident

In the realm of workplace safety, the aftermath of an arc flash incident can be a pivotal moment for both individuals and organizations. Drawing insights from firsthand accounts shared by arc flash survivors and safety professionals during Arc Week Season 4, we explore the profound impact, challenges, and lessons learned […]

November 15, 2023

Arc Bites: Compliance – The Difference Between Believing and Behaving

Education and culture are central to compliance with lifesaving policies and PPE. “I want to make believers and not behavers,” William Watson, Vice President of Safety at Miller Electric and Chairman of the NECA Large Contractor Safety Group, said during the round table discussion in the Arc Week Season 4 […]

November 8, 2023

Arc Bites: The Comfort Factor

In the world of workplace safety, comfort is often an overlooked, yet essential, criteria for selecting Personal Protective Equipment (PPE). When it comes to arc-rated and flame resistant (AR / FR) clothing, comfort is not a luxury, it’s a necessity. Arc Bite Round Table Discussion: The Comfort of PPE In […]

November 3, 2023

Introducing Arc Bites: Raw Stories, Real Solutions

Tyndale is thrilled to introduce a captivating new series, Arc Bites: Raw Stories, Real Solutions – a spin-off series derived from Tyndale’s most popular season of Arc Week, Season 4: Humanizing the Hazard. In the fourth season of Arc Week, hosted by Scott Margolin, we had the privilege of interviewing […]

October 27, 2023

Stay Safe and Informed: PPE Updates in the 2024 NFPA 70E Electrical Safety Standard

In the evolving landscape of workplace safety, staying up to date with industry standards is crucial. The National Fire Protection Association’s (NFPA) NFPA 70E standard is a critical reference for those who specify or wear arc-rated and flame resistant (AR / FR) clothing and related personal protective equipment (PPE). This […]

September 29, 2023

Testing the Heat: Advanced Thermal Analysis Facilities

When it comes to personal protective equipment (PPE) for individuals working in hazardous environments, the importance of arc-rated and flame resistant (AR/FR) clothing cannot be overstated. These specialized garments are designed to protect wearers from arc flash and flash fire hazards encountered in utility, oil and gas, and other industries. […]

September 8, 2023

What’s the Latest from our Proud to Help Committee?

At Tyndale, giving back isn’t just a simple act of kindness; it’s the very fabric of who we are. Led by our Proud to Help Committee, Tyndale employee “members” have taken the initiative to help support our local communities combat widespread concerns such as poverty, disease, environmental impacts, and more. […]

August 25, 2023

Arc Week Season 4, Ep. 5: “There’s No Wrong Time to Do the Right Thing” – Act Today

The survivors are back, and together again – this time on dry land. In this episode, we dive into lessons from the belly of the beast – for both safety leadership and for other electricians in the field. William Watson, Vice President of Safety at Miller Electric and Chairman of […]

August 24, 2023

Arc Week Season 4, Ep. 4: “Nobody Forgot Their PPE This Time” – The Gang Goes Shark Diving

We’re taking the invaluable lessons learned from arc flash mishaps to new depths—literally. Observe these survivors and William Watson, VP of Safety at Miller Electric and Chairman of NECA’s Large Contractor Safety Group, as they navigate a shark dive. Why? To demonstrate that you can do something inherently dangerous, like […]

August 23, 2023

Arc Week Season 4, Ep. 3: “Don’t Be Me,” The Jason Brozen Story

“It’s pretty low risk since I’m smarter than this hazard.” That’s what Jason – like many experienced electricians – had come to believe about energized work. As a master electrician for over 14 years, Jason was installing a breaker in a 2,500-amp piece of gear at a hotel when he […]

August 22, 2023

Arc Week Season 4, Ep. 2: “Safety Has to be a Priority,” The Brandon Schroeder Story

“I’ve done these types of tasks hundreds of times. It did not even seem dangerous to me.” That’s what Brandon was thinking before he was victim of an arc flash accident that should have taken his life. Imagine a seemingly ordinary task turning into a life-defining moment. Brandon found himself […]

August 21, 2023

Arc Week Season 4, Ep. 1: “Fireball Smith,” the Brandon Smith Story

“I was five minutes away from losing my life.” That’s what doctors told electrician Brandon Smith after he faced an arc flash incident. Pulled from another project to help with a rush job, Brandon was tasked with changing over an old building to a newly-installed transformer. He was wearing a […]

August 18, 2023

Humanizing the Hazard: Arc Week Season 4

The wait is over. Arc Week Season 4: Humanizing the Hazard is upon us, and we’re diving headfirst into the raw stories of three arc flash survivors, surfacing with invaluable lessons. This season’s personal approach to arc flash hazards showcases survivors’ experiences that serve as vital lessons, shedding light on […]

August 8, 2023

Spin Cycle: Laundering an AR / FR Garment 100 Times and Exposing It to Flammable Lint

Welcome to the fifth and final installment of our Spin Cycle blog and video series. Uniform rental companies claim you can’t launder AR / FR apparel at home, but is that necessarily true? They often suggest that when AR / FR clothing is washed with regular clothing, flammable lint can adhere to […]

August 1, 2023

Spin Cycle: Laundering an AR / FR Garment 100 Times

In the fourth installment of our Spin Cycle blog and video series, we turn our attention to arc-rated and flame resistant (AR / FR) clothing durability and performance. Tyndale’s Vice President of Technical, Scott Margolin, tests whether laundering an AR / FR garment 100 times under normal home laundering conditions affects its […]

July 28, 2023

Protective Clothing Strategies to Prevent Heat Stress

The heat is on! The Farmer’s Almanac describes the “dog days of summer” – from July 3 to August 11 each year – as the hottest and most unbearable days of the year. And so far, this entire summer has been blistering hot across North America. After a record-breaking June, […]

July 25, 2023

Spin Cycle: 50 Wash Cycles with Fabric Softener on an AR/FR Garment

Welcome to the third installment of our Spin Cycle blog and video series! Join Tyndale’s Vice President of Technical, Scott Margolin, as he takes you through today’s test: determining whether using fabric softener during home laundering affects an AR / FR garment’s performance. You may hear uniform rental companies say that bleach […]

July 18, 2023

Spin Cycle: 50 Washes with Oxidative Bleach on an AR/FR Garment

For episode two of Spin Cycle, we head back to the testing facility with Tyndale’s Vice President of Technical, Scott Margolin, as he takes us through today’s test: whether oxidative bleach affects an AR / FR garment’s performance. Many laundry detergents contain oxidative bleach products, but does oxidative bleach have […]

July 11, 2023

Spin Cycle: 50 Wash Cycles with Liquid Chlorine Bleach on an AR/FR Garment

Welcome to the first episode of our Spin Cycle blog and video series! Join Tyndale’s Vice President of Technical, Scott Margolin, as he takes you through today’s test to determine whether using liquid chlorine bleach during home laundering affects an AR / FR garment’s performance. All labels in arc-rated and […]

July 7, 2023

Spin Cycle: Washing Away AR/FR Home Laundry Misconceptions

Is home laundering safe when it comes to the care and maintenance of arc-rated and flame resistant (AR / FR) clothing? Absolutely! But common sales tactics used by uniform rental companies attempt to convince workers and businesses alike that industrial laundering is a requirement. They likely offer industrial laundry services […]

June 30, 2023

EVs and the DC Hazard: Non-AR Hi-Vis Vest & Outerwear in a DC Arc

Welcome to our BONUS episode of EVs and the DC Hazard with Scott Margolin, Vice President of Technical at Tyndale. Today, we are focusing on the importance of understanding the risks associated with wearing flammable high-visibility (hi-vis) vests and outerwear in the presence of a DC arc. Many people in […]

June 21, 2023

EVs and the DC Hazard: 88/12 Outerwear in a DC Arc

We’re ending our series with a bang! In today’s episode we test a 9 oz. arc-rated (AR) windbreaker made with an 88% cotton and 12% nylon (“88/12”) blend, exposing it to high incident energy levels. Prepare to witness the extraordinary protective capabilities of this AR outerwear as it withstands and […]

June 20, 2023

EVs and the DC Hazard: NSA Enespro® 40 cal Suit in a DC Arc

What happens in a DC arc when the potential incident energy is high enough to require an arc suit instead of dailywear? We set out to find out. In today’s leading-edge demonstration, we subject an NSA Enespro® 40 cal arc suit to a DC arc with high incident energy. Join […]

June 15, 2023

EVs and the DC Hazard: 88/12 CAT 2 Coverall in a DC Arc

Today we’re switching it up: instead of testing shirts and pants against DC arcs, we test the significance of DC arcs against AR 88/12 CAT 2 coveralls. Coveralls made from an 88/12 fabric blend – that is, a fabric that’s 88% AR/FR cotton and 12% nylon – are commonly used […]

June 14, 2023

EVs and the DC Hazard: EBT AR Garment Exposed Above Arc Rating

In our previous episode, we showed you how Tyndale’s FRMC® arc-rated (AR) shirt and jeans perform in a DC arc flash. Explore the Boundaries of DC Arcs Hold on tight as we push the limits! We’re intentionally subjecting an energy breakopen threshold (EBT) AR garment, rated at 9.1 calories, to […]

June 13, 2023

EVs and the DC Hazard: Tyndale FRMC® CAT 2 Outfit in a DC Arc

In our previous episode, we pushed an NSA TECGEN® CAT 2 AR shirt and a pair of AR jeans to their limits by subjecting them to a thrilling DC arc. And they passed with flying colors, effectively extinguishing fire and eliminating any breakopen risks. Get Ready for an Electrifying Episode […]

June 8, 2023

EVs and the DC Hazard: NSA TECGEN® CAT 2 Outfit in DC Arc

In our last two episodes, we tested non-protective polyester/cotton blend and 100% cotton fabrics to see how they perform in the face of a DC arc. But how do popular arc-rated (AR) garments perform in DC arcs at or near their arc ratings? Follow along with our next few episodes […]

June 7, 2023

EVs and the DC Hazard: Cotton Workwear in a DC Arc

Many people think that 100% cotton is okay to wear when there’s an arc hazard because it doesn’t melt. But is that true? Can a DC arc flash ignite flammable 100% cotton workwear, and does it require any more or less energy than an AC arc to do so? Plug […]

June 6, 2023

EVs and the DC Hazard: Poly/Cotton Workwear in a DC Arc

Did you know that polyester and cotton (“poly/cotton”) blend is one of the most common fabric choices for making non-protective workwear? In fact, this type of fabric is being worn by many people who work in and around EVs. But what happens to poly/cotton fabric when it’s exposed to a […]

May 19, 2023

What are the Best Resources for Electrical Safety?

May is National Electrical Safety Month. Each year, electrically related incidents disrupt livelihoods and families due to injuries, deaths, and property losses. Currently, over 750,000 industrial electrical workers are not using proper protection. This number is even more alarming because NFPA 70E, Standard for Electrical Safety in the Workplace – […]

May 16, 2023

Combustible Dust Series: Part 7 – OSHA’S Combustible Dust National Emphasis Program Recently Revised

Combustible dust is a significant industrial hazard that can result in catastrophic injuries and loss of life. Since 2007, when they first issued their Combustible Dust National Emphasis Program (NEP), OSHA has focused on protecting the health and safety of workers potentially exposed to combustible dust flash fires and explosions. […]

May 12, 2023

Decoding the Language of Standards: Should vs. Shall

The recent promotion of NFPA 70B from a guide to a standard carries significant implications for electrical maintenance. We recently published a blog that reviews this status change in detail. This upgrade is an opportune time to address a question we often receive: In the context of industry standards, what’s […]

May 10, 2023

EVs and the DC Hazard: AC vs DC Arc Flash – What’s the Difference?

Technology has a habit of outpacing understanding of hazards and safety; DC arc flash is no exception. With the rapid rise of EVs, DC power is expanding exponentially in the USA. DC battery manufacturing, energy storage and DC-to-DC charging are all growing rapidly, and battery replacement, maintenance, and repairs are close behind. […]

May 10, 2023

Introducing EVs and the DC Hazard

As the electric vehicle (EV) market continues to grow, so does the importance of understanding the potential hazards associated with direct current (DC) electrical systems. That’s why Tyndale is proud to launch our new educational series, EVs and the DC Hazard. Whether you are a battery manufacturer, work in battery […]

May 9, 2023

The Rise of Electrification: OSHA’s Revisiting of Arc Flash Guidance

Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. Tyndale’s Rise of Electrification series highlights the growing demand for electricians in the United States. In parts one and two, we discussed the significance of this trend and its implications for […]

May 5, 2023

What are Tyndale’s Top Safety Tips for Summer 2023?

Summer is right around the corner! And while we typically enjoy many fun summertime activities, such as going to the beach, hiking, and camping, the season also presents some safety issues. Stormy weather, heat-related illnesses, skin damage from the sun’s UV rays, and bug bites require extra precautions, which are […]

May 3, 2023

Rise of Electrification: Demand for Electrical Maintenance Requires Safety Awareness

In the first episode of Tyndale’s Rise of Electrification blog mini-series, we covered how the increased adoption of electrification is having a positive impact on the job market for electricians. The recent passing of the Infrastructure Investment and Jobs Act is a momentous step towards a sustainable future for the […]

April 26, 2023

The Rise of Electrification: How it’s Transforming the Job Market for Electricians

Welcome to The Rise of Electrification, a three-part series that explores the current state of electrification in the US and studies several key impacts of the growing demand for electricity both now and in the near future. The world is currently in the midst of an electrification revolution. Electrification refers […]

April 21, 2023

How to Remove Stains from AR / FR Clothing

Working in a profession that requires you to wear flame resistant and arc-rated (AR / FR) clothing is serious business. You’re exposed to potential risks and hazards on a regular basis, so you must be prepared with the right gear. But what do you do when your trusted AR / […]

April 6, 2023

What Changes Now That NFPA 70B is a Standard?

Did you hear the news? NFPA 70B, Standard for Electrical Equipment Maintenance, was recently upgraded from a guide – that is a recommended practice indicating what you should do – to a standard, making it a requirement indicating what you shall do. In our last post we took a look […]

March 31, 2023

How Does NFPA 70B Fit with NFPA 70 and NFPA 70E?

Last week we shared that NFPA 70B, Standard for Electrical Equipment Maintenance, was recently upgraded from a guide – that is a recommended practice indicating what you should do, to a standard – making it a requirement indicating what you shall do. As a result, there is a strong likelihood […]

March 22, 2023

Dangers of Improper Wear Flash Fire: Episode 6 – Flammable High Visibility Vest & Outerwear Over FRC

Welcome to another episode of The Dangers of Improper Wear and Flash Fire, where Scott Margolin, Tyndale’s Vice President of Corporate Strategy & Technical, takes center stage to shed light on common improper wear mistakes that could result in injury – or worse. This episode highlights how wearing both a […]

March 14, 2023

Dangers of Improper Wear Flash Fire: Episode 5 – Flammable Hoodie Over FRC

Don’t let a Flammable Hoodie be your Downfall Get ready to rethink the way you dress for work. In this episode, Scott walks viewers through a life-threatening scenario where a female manikin wearing flame resistant (FR) pants but a flammable hoodie over her FR clothing is exposed to a flash […]

March 7, 2023

Dangers of Improper Wear Flash Fire: Episode 4 – Consequences of Wearing the Wrong Rainwear

Flame resistant (FR) rainwear that meets the proper ASTM standard is essential for anyone working in an environment with potential flash fire hazards. However, not all rainwear labeled as flame resistant is created equal. Read on to understand why it’s crucial to wear rainwear that meets ASTM F2733: the Standard […]

February 28, 2023

Dangers of Improper Wear Flash Fire: Episode 3 – Flammable Outerwear + Cotton Base Layer

Flash fires are unpredictable and can leave little to no time for people to react. Hence, the right clothing is crucial to protect oneself from intense heat, flames, and potential injury. In this episode of Dangers of Improper Wear: Flash Fire, Scott Margolin, Tyndale’s Vice President of Corporate Strategy & […]

February 22, 2023

Dangers of Improper Wear Flash Fire: Episode 2 – Unzipped FR Coveralls

Flash fires are one of the most dangerous hazards in the workplace, and they can cause serious injuries or even fatalities if proper precautions are not taken. In this blog post, we will discuss the risks of improperly wearing protective clothing – specifically unzipped flame resistant (FR) coveralls – in […]

February 14, 2023

Dangers of Improper Wear Flash Fire: Episode 1 – Wearing Flammable Clothing

Welcome to episode 1 of our Dangers of Improper Wear: Flash Fire blog and video series. Let’s join our guide, Tyndale’s Vice President of Corporate Strategy & Technical, as he explains today’s improper wear topic: wearing flammable clothing – as opposed to flame resistant clothing (FRC) – when exposed to […]

February 7, 2023

Dangers of Improper Wear: Flash Fire

The importance of wearing flame resistant clothing (FRC) to protect against flash fire hazards is widely recognized – you might even be aware of the flash fire standards and test methods. However, knowing how to wear flame resistant clothing properly is not always easily understood. To drive home the importance […]

February 1, 2023

What is a Stoll Curve?

As a woman-owned company, Tyndale is dedicated to celebrating and supporting women in the industry. Our popular Women in Power Series shines a light on the growing number of women working in the field today. But whether in the spotlight or behind the scenes, women have played an integral role […]

January 20, 2023

The Top 5 FR FAQ’s of 2022

In case you needed another reason to love Fridays, here’s a good one: it’s our FR FAQ day! Every Friday, we promote a blog post highlighting the answer to a frequently-asked question (FAQ). In each, you’ll find helpful information on topics like the hazards you face, the arc-rated and flame […]

December 13, 2022

Women in Power: How Pam Costello Serves Workers – and Advances Women’s AR / FR

In this episode of Women in Power, our host, Sarah Steel, Director of Online Marketing and Events, sits down with a woman who enhances the Pam Costello serves as Product Development Manager at Tyndale. With a background in fashion design and past experience designing women’s maternity wear and safety and […]

December 2, 2022

Arc Ratings for FR Clothing: What is the Difference Between ATPV and EBT?

To better understand arc ratings – what they are and the difference between the two ways they are measured – we define them below and link back to Tyndale’s Arc Week Season 3, which covers the science behind all things arc flash. What is an Arc Rating? Simply put, an […]

November 30, 2022

Women in Power: How Tina and Melinda from Carhartt Company Gear Address Trends in Women’s PPE

Michigan natives, Tina Picciuto-Norris and Melinda Fabry, Global Product Design Manager and PPE Merchandiser from Carhartt Company Gear share what led them to their careers at the leading workwear brand in this two-for-one interview. Tune in to interview 9, hosted by Tyndale’s Director of Online Marketing and Events, Sarah Steel: […]

November 4, 2022

UPDATE: Where does OSHA Stand on Expanding Protections for Indoor Electricians?

Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. More than 500,000 Americans working on or near energized industrial electrical equipment today do not have protection from deadly arc flash hazards, despite safety standards that have been in place for […]

October 27, 2022

Women in Power: Alex Baker – How Alex Baker Cultivates Career Pathways for Women at PG&E

Through the years, Tyndale has seen firsthand the changes companies in the energy sector are making to empower and represent women in the workforce. In this episode of Women in Power, Alex Baker, Pacific Gas and Electric Company’s (PG&E) PowerPathway Program Manager and lead of HR initiatives for women in […]

October 21, 2022

How Do I Navigate Protective Footwear Supply-Chain Challenges?

We’re all well aware of current supply chain disruptions in the aftermath of the COVID-19 pandemic. Go into almost any store, and you can’t help but notice the empty shelves once filled with your favorite products. But if you or your workers wear protective footwear to stay safe on the […]

October 11, 2022

Combustible Dust Series: Part 6 – The Top 5 Factors to Consider for Your FR Clothing Supplier

Now that we’ve learned, in Part 5 of this series, about the key characteristics of NFPA-compliant flame resistant clothing to protect workers against combustible dust hazards, let’s turn our attention to sourcing these garments. Ensuring your workers are protected and compliant with industry standards is not something you want to […]

September 20, 2022

Women in Power: Susan Glynn – Embracing Experiences and Challenges to Lead Ariat’s Women’s Workwear Line

As the first member of Ariat’s apparel team, Susan Glynn reflects on her 20-year career at the women-owned performance apparel brand while reminiscing on inspiration from her past that have driven her to excel in her current role as Vice President of Apparel Design and Development. Susan shares how her […]

September 14, 2022

Combustible Dust Series: Part 5 – What are the NFPA Requirements for FR Clothing?

As we learned in Part 4 of this series, both NFPA 652, Standard on the Fundamentals of Combustible Dust, and OSHA’s Combustible Dust National Emphasis Program (NEP) clearly state that flame resistant (FR) clothing is required to be worn where a combustible dust hazard has been identified. We also touched […]

September 13, 2022

Proud to Protect Canada – Episode 12: CSA Z195 & Jurisdictional Regulations Governing Protective Footwear

In previous episodes of our Proud to Protect Canada series, we reviewed the safety standards and jurisdictional requirements governing arc-rated and flame resistant (AR / FR) clothing and we looked at high visibility safety apparel (HVSA) standards and provincial regulations. In this final episode of our series, we examine CSA […]

September 2, 2022

Arc Week Season 3, Ep. 5: Shooting Down the Myth of “De-energized Work”!

If you’ve ever said the words, “we don’t work energized”, or heard those words, this episode is a must watch. To shoot down the myth of de-energized work, tune in to hear from four industry experts as they explain why, for commercial and industrial electricians and electrical workers in other […]

September 1, 2022

Arc Week Season 3, Ep. 4: Who Wins in a Dog Fight? ATPV vs. EBT Explained

In Episode 3, we went behind the scenes at the arc flash testing lab, Kinectrics, to see great balls of fire, better known as arc flashes. There we demonstrated exactly what happens to flame resistant (FR) fabric when an arc flash takes place and covered how to determine the arc […]

August 31, 2022

Arc Week Season 3, Ep. 3: Great Balls of Fire – Live at the Arc Ratings Lab

We’re taking you on a journey to spend a day in the arc ratings lab, and what better way to do it than to take you to the facility that makes it all happen? Kinectrics is the world’s leader in life cycle management for the electric utility industry, and where […]

August 30, 2022

Arc Week Season 3, Ep. 2: Return to the Danger Zone – Determining Arc Flash Energy Part 2

In today’s episode, we’re diving right in to the three remaining variables that determine arc incident energy level. Watch the video below, featuring your Arc Week host, Scott Margolin as he explains what fighter jets, shark teeth, and shark feeding zones have in common with cycle time, arc gap, and […]

August 29, 2022

Arc Week Season 3, Ep. 1: Welcome to the Danger Zone – Determining Arc Flash Energy Part 1

Arcs are clearly dangerous, but the question is, how dangerous? How do we determine how big a given arc, at a given set of energies, out of a given piece of equipment will be? What is arc incident energy? Arc incident energy is the potential magnitude of an arc flash. […]

August 24, 2022

From the Bottom Up: Arc Week Season 3

It’s that time of year again, Arc Week Season 3 is here and filled with content you won’t want to miss, plus references to a movie some might consider Tom Cruise’s best work. As we dive into the danger zone, Scott Margolin, your Arc Week Host and Tyndale’s VP of […]

August 23, 2022

Combustible Dust Series: Part 4 – Is FR Clothing Needed for a Combustible Dust Hazard?

In Part 3 of this series, we learned about the specified methods to mitigate combustible dust hazards, including building design, equipment design, controlling ignition sources, and dust control measures. But what happens if, despite all mitigation efforts, a combustible dust flash fire or explosion occurs? What is the last line […]

August 17, 2022

Proud to Protect Canada – Episode 11: Can a Canadian Company Buy AR / FR Clothing from an American Company?

If you’ve been following along in our Proud to Protect Canada series, you’ve heard our resident experts talk through some fundamental topics like – why wear arc-rated and flame resistant (AR/FR) clothing, what are arc flash hazards and related standards, what are flash fire hazards and related standards, and how […]

August 12, 2022

What’s New to Tyndale’s Line of Women’s Apparel?

What’s New to Tyndale’s Line of Women’s Apparel? Check Out What’s Now Available in Tyndale’s Versa Collection! To provide an enjoyable uniform experience for everyone, Tyndale continues to make strides in developing our women’s clothing line. As our markets continue to grow, we’ve made it a priority to expand our […]

August 9, 2022

Combustible Dust Series: Part 3 – What Are the Mitigation Methods for Combustible Dust?

In Part 2 of this series, we learned that NFPA 652, Standard on the Fundamentals of Combustible Dust, provides basic principles and requirements regarding identifying and managing flash fire and explosion hazards due to combustible dust. NFPA 652 requires owners to conduct a Dust Hazard Analysis (DHA) where combustible dusts […]

August 3, 2022

Proud to Protect Canada – Episode 10: AR / FR Labeling Requirements in Canada

In previous episodes of our Proud to Protect Canada series, we reviewed the safety standards governing PPE and protective clothing related to arc flash and flash fire hazards. In Episode 3, we learned that CSA Z462, the Canadian standard governing arc flash protection, is very similar to its US counterpart, […]

July 26, 2022

Combustible Dust Series: Part 2 – What Is a Dust Hazard Analysis?

As we learned in Part 1 of this series, catastrophic flash fires and explosions can occur from the ignition of airborne dust composed of material that may not be flammable except when in the form of powder. Recognizing and understanding the potential combustibility of dust present in a facility is […]

July 20, 2022

Proud to Protect Canada – Episode 9: Jurisdictional Regulations for Arc-Rated Flame Resistant (AR / FR) Clothing

Regulations for arc-rated and flame resistant (AR / FR) clothing vary slightly across Canada’s provinces. At their core, they align with general, federal requirements while expanding to provide additional best practices that, all together, give us a straightforward takeaway to understanding and ensuring compliance. It’s important to note that the […]

July 19, 2022

Women in Power: Candice Onraët’s Strategy for Success in the Oil and Gas Industry

Though women comprise just 22% of the utility workforce compared to 47% in other industries, we’re spotlighting the power of each individual spark to ignite change. Follow along with our Women in Power series as we celebrate and empower women leading the way in a wide range of careers where […]

July 12, 2022

Combustible Dust Series: Part 1 – How Explosive Is Combustible Dust?

In this explosive series, we turn our attention to a potentially deadly hazard prevalent in, but not limited to, manufacturing and processing industries: combustible dust. The series explains what combustible dust is, how the risks are quantified, what a dust hazard analysis entails, and how to mitigate the hazard and […]

July 1, 2022

What is Combustible Dust?

Combustible dust is a hazard that can result in devastating fires, explosions, injuries, and fatalities. According to DustEx Research Ltd., since 2016, when combustible dust incident reporting was first launched, an average of 133 fires, 30 explosions, and 36 injuries per year have occurred per year in the United States […]

June 21, 2022

Proud to Protect Canada – Episode 8: Jurisdictional Regulations for High-Visibility Safety Apparel

Regulations for high-visibility safety apparel (HVSA) vary across Canada’s ten provinces and three territories, with nuances in the various jurisdictional or occupational requirements. What are the differences among this mixture of laws, and how do they relate to the federal HVSA requirement as well as CSA Z96, the safety standard […]

June 17, 2022

What’s the Difference Between a Test, Practice, Guide, and Specification?

Navigating your way through the language in a standard can be dizzying enough. Add the fact that there are several different types of standards and it’s easy to get a little lost. This is why we’re taking the time to share the six different types of standards under ASTM while […]

June 3, 2022

What are Heat Stress Causes, Symptoms, and Solutions?

As reported in a recent blog, OSHA has issued a National Emphasis Program (NEP) to protect workers from the dangers of heat-related illnesses. This summer, OSHA is proactively looking for violations in 70 targeted high-risk industries when a heat warning or advisory has been issued in the area. This initiative […]

May 27, 2022

How Does Tyndale Ensure Continuous Business Productivity?

How prioritizing our member’s workplace health and happiness contributes to the overall success of our business productivity. At Tyndale, we’re continuously working to raise the bar, and we’re proud of our proven history of innovation – with an unwavering focus on enhancing our customers’ experience within each unique managed program […]

May 19, 2022

Women in Power: Why Alicia Rogers Chooses to Work Outside Her Home State

Alicia Rogers had many jobs before she landed her career as a lineman but there was always one element missing – being outdoors. A job in the tree industry, cutting tree limbs away from power lines, initially sparked her interest in linework. After two years on a waiting list, she […]

May 13, 2022

What is the NSUJL?

NSUJL stands for the National Sisterhood United for Journeymen Linemen, an nonprofit organization started in 2012 by a group of linewives who were motivated to help families of fallen and injured lineworkers. Today the organization is dedicated to assisting fallen or injured IBEW Journeymen Linemen, Utility Linemen, Apprentice Linemen, Groundmen, […]

May 10, 2022

Proud to Protect Canada – Episode 7: What Is a Standard and How Do They Come to Fruition in Canada?

In previous episodes of our Proud to Protect Canada series, we reviewed the safety standards governing PPE and protective clothing related to arc flash and flash fire hazards and the Canadian standard governing high-visibility safety apparel. In the video below, watch Tyndale Canada Sales Director, Paul Castelli and Tyndale Vice President of Corporate Strategy & Technical, Scott […]

May 10, 2022

Women in Power: Tamara Caponegro – Insights from a Woman Who Knows PPE for Women Who Wear PPE

As Vice President of Sales at Tyndale for more than 15 years, Tamara Caponegro has had a front row seat in the industry’s progress toward better serving women in the field – and has played an active role. Hear from Tamara in her own words about her own career as […]

May 6, 2022

What are Tyndale’s Top Tips for Summertime Safety?

At long last, summer is almost here. Although we may look forward to days at the beach, outdoor events, and other fun ways to soak up the sunshine, we must also prepare for some summertime nuisances that can turn into health and safety issues if not kept in check. As […]

April 29, 2022

What do Safety Standards Say About Vented Shirts?

Summer is coming and now is the perfect time to make sure that you’re not only stocked up on lightweight and breathable arc-rated and flame resistant (AR / FR) clothing, but also aware of the standard updates that govern those garments such as, vented shirts. Designed to help dissipate heat, […]

April 27, 2022

Proud to Protect Canada – Episode 6: High-Visibility and Reflective Striping (CSA Z96)

In previous episodes of our Proud to Protect Canada series, we reviewed the safety standards governing PPE and protective clothing related to arc flash and flash fire hazards. In this episode, we’ll turn our attention to the Canadian standard governing high-visibility safety apparel, CSA Z96. In the video below, Tyndale […]

April 19, 2022

Women in Power: Kori Wormsbecker’s Energizing Career as a Local Gas Representative

Kori Wormsbecker wasn’t actively seeking a career as a local gas representative until the opportunity to shadow a neighbor who worked in the field presented itself. She received a business management degree from Idaho State University, and up until her apprenticeship in 2012, Kori worked in the call center at […]

April 12, 2022

Proud to Protect Canada – Episode 5: CGSB 155.20 vs. NFPA 2112

In today’s episode, we’ll look at CGSB 155.20, the Canadian standard governing workwear for protection against flash fire. In the video below, Tyndale Canada Sales Director Paul Castelli, talks to Canada Technical Advisor Sara Olsen about CGSB 155.20 and the similarities and differences between it and its US counterpart, NFPA […]

April 8, 2022

Have you stocked up on your lightweight FRC for summer?

Summer temperatures have already arrived in some areas of the country, signaling it’s time to order your lightweight arc-rated and flame resistant (AR / FR) clothing early. Aside from making sure you’re weather-ready for those random extra warm spring days, beating the rush of summer orders is important for many […]

April 5, 2022

Women in Power: Sara Olsen’s Fiery Career as a Woman in the AR / FR Clothing Industry

Sara Olsen has worked in the personal protective equipment (PPE) industry for over 15 years, but it isn’t a career she set out to do. What started as an interest in knitting, fibers, and fabrics turned into an M.Sc. degree in textile and apparel science from the University of Alberta. […]

April 1, 2022

How are Safety Clothing Brands Closing the Gap in Women’s PPE?

If you’re a woman required to wear arc-rated and flame resistant (AR / FR) clothing, you may have experienced a lack of appealing PPE options specifically designed for you. While improvements have been made to enhance the women’s safety apparel and PPE offering, this continues to be a concern for […]

March 29, 2022

Proud to Protect Canada – Episode 4: Flash Fire Hazards

In previous episodes of our Proud to Protect Canada Series, we learned about arc flash hazards and CSA Z462, the Canadian safety standard that governs arc flash. In this episode, we’ll turn our attention to another extremely dangerous type of thermal hazard: flash fire. This type of hazard is present […]

March 22, 2022

Women In Power: Why Maureen Miller is Proud to be Called a Lineman

At 19, Maureen Miller was on a path to becoming a registered nurse. After her father’s friend suggested the idea of becoming a lineman, Maureen was on the fast track to conquering a non-traditional career as a journeyman lineman.

March 18, 2022

Introducing Tyndale’s Women in Power Series

Did you know that women comprise just 22% of the utility workforce compared to 47% nationwide in other industries? We set out to better understand how to support the women who are succeeding in non-traditional occupations in industries like manufacturing, construction, utilities, and oil and gas. And what better way […]

March 15, 2022

Proud to Protect Canada – Episode 3: What is CSA Z462?

In Episode 2 of our Proud to Protect Canada series, Tyndale’s Canada Sales Director, Paul Castelli, and VP of Technical, Scott Margolin, answer the question, what is an arc flash. Beyond the definition, they discussed what causes an arc flash, the dangers associated with an arc flash, and how to […]

March 11, 2022

What is NFPA 70 and how does it relate to NEC and NESC?

In previous posts, we explained the National Electric Code (NEC) and the National Electric Safety Code (NESC). Today, we’re focusing on NFPA 70E and how it relates to those codes. There’s even an easy-to-read comparison chart so you can see the differences at a glance. We’ll start with a high-level […]

March 1, 2022

Proud to Protect Canada – Episode 2: Arc Flash Hazards

As Tyndale extends our managed arc-rated and flame resistant (AR / FR) clothing programs into Canada, we invite you to follow along in our Proud to Protect Canada series. While many of the topics in this series contain Canadian-specific content, there are some topics that are relevant on both sides […]

February 25, 2022

What is the NEC?

There are a lot of safety standard acronyms out there and they can often be confused or misunderstood. In this post, we’re focusing on the National Electric Code (NEC). In future posts, we cover the National Electric Safety Code (NESC) and how the NEC and NESC relate to NFPA 70E. […]

February 18, 2022

BREAKING: What’s the Latest from OSHA and PES on Arc Flash?

Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. More than 500,000 of Americans working on or near energized industrial electrical equipment today do not have protection from the deadly arc flash hazard, despite safety standards that have been […]

February 15, 2022

Proud to Protect Canada – Episode 1: Why Wear AR / FR Clothing?

We’re going back to basics to answer a fundamental question, “Why wear FR?” This topic transcends borders and applies to workers exposed to thermal hazards everywhere – so it’s critical to understand. It’s true, AR / FR clothing works as the “last line of defense” in the event of an […]

February 8, 2022

Proud to Protect Canada Series: Introduction

In case you missed it, Tyndale is expanding into the Canadian market! We are eager to serve Canadian-based companies who want to take advantage of our exclusive program, which supports compliance with both Canadian and US industry safety standards. Tyndale’s new Canadian Sales Director, Paul Castelli, is leading our initiative […]

January 18, 2022

Top 3 Recent Changes to AR/FR Clothing Standards

As you know, the ongoing pandemic has impacted every single area of life. As a result, it is no surprise that the past two years have been relatively quiet in terms of major changes to safety standards with impact to arc-rated and flame resistant (AR / FR) clothing requirements. Tyndale […]

January 7, 2022

Drumroll Please…Our Top 5 Blogs & Videos of 2021

At Tyndale we’re committed to providing not only quality products and reliable service, but also in-depth education and industry leadership. We work diligently all year long to create new and engaging resources that make it easy to expand your knowledge and better protect yourself and your workers. As we look […]

November 16, 2021

The Dangers of Improper Wear: Episode 11 – Flammable Contaminants

You’re wearing the right PPE, and you’re wearing it properly – tucked, button, layered appropriately, etc. – what can go wrong? Well, if you’re exposed to a flammable substance, and your PPE is contaminated with such a substance, you are at risk of injury in the event of an arc […]

November 9, 2021

The Dangers of Improper Wear: Episode 10 – Non-FR Hoodie Over AR/FR Clothing

If you’ve ever been tempted to reach for a non-FR hoodie to wear over your AR / FR to the jobsite on a chilly morning, you’re not alone: unfortunately, this mistake is common – especially in fall and spring, when it tends to be chilly in the morning and warms […]

November 2, 2021

The Dangers of Improper Wear: Episode 9 – The Chimney Effect

On the jobsite, head to toe coverage is critical for complete, lifesaving protection. In Episode 4 of The Dangers of Improper Wear – Untucked AR / FR Shirts, we looked at Flash Fire and Arc Flash Safety Standards to confirm that YES, you should always tuck in your arc-rated and […]

September 28, 2021

The Dangers of Improper Wear: Episode 8 – Why a Partially Unbuttoned AR Shirt May Not Fully Protect

Join our host, Scott Margolin, as he uncovers the consequences of failing to fully button your arc-rated or flame resistant (AR/FR) shirt. Improperly wearing your AR / FR clothing could be the difference between injury or leaving the jobsite safely if exposed to an arc flash or flash fire hazard. […]

September 21, 2021

The Dangers of Improper Wear: Episode 7 – Missing the AR Garment and Hazard Match

The common theme in our Dangers of Improper Wear series is ensuring that the garments you put on each day are worn properly and provide adequate protection against the hazards you face at work. Whether you’re faced with potential flash fire or arc flash hazards, wearing protective gear properly could […]

September 14, 2021

The Dangers of Improper Wear: Episode 6 – Consequences of Using the Wrong Rainwear Standard

Dress Confidently for Arc-flash Hazards with ASTM F1891-Rated Protective Rainwear Before you invest in arc-rated or flame resistant (AR / FR) rainwear it is important you’re aware of the standard that the garment passes to allow it to make its FR claim. Specifically, rainwear tested to ASTM D6413, the “Vertical […]

September 7, 2021

The Dangers of Improper Wear: Episode 5 – Non-AR Outerwear Over CAT 2 Garments

In today’s episode, we’re looking at the consequences of wearing flammable outerwear over AR garments. In this case, a flammable high-visibility vest and jacket over CAT 2 arc-rated (AR) dailywear. The video below graphically shows the consequences of wearing flammable clothing over quality AR clothing. So, be sure to watch […]

August 31, 2021

Dangers of Improper Wear: Episode 4 – Untucked AR/FR Shirts

Are You Required to Tuck-in Your AR / FR Shirt? The answer is YES, you should always tuck-in your arc-rated and flame resistant (AR / FR) shirts. We’ll show you why it’s so important in this week’s episode from our Dangers of Improper Wear series. Watch the video below for […]

August 27, 2021

Arc Week Season 2, Ep. 5: Respect Your Environment – Swimming with Sharks and Working with Arcs

In this episode, our host Scott Margolin, Vice President of Technical, is on location in Jupiter, Florida, where he’s joined by arc flash experts Hugh Hoagland of ArcWear and Kinectrics, Rich Gojdics of Enespro PPE, and Jason Iannelli of the Electrical Training Alliance (ETA) and International Brotherhood of Electrical Workers […]

August 26, 2021

Arc Week Season 2, Ep. 4: Famous Sharks & Arcs Through History

In this episode, Special guest Duane Siders, Chief Revenue Officer at National Safety Apparel (NSA), joins Tyndale’s Scott Margolin to look back at some of the most famous arcs in history – and how far we’ve come. But not before we look back at some of the most famous sharks […]

August 25, 2021

Arc Week Season 2, Ep. 3: “You’re Gonna Need a Bigger Boat” – CAT 3 & 4 Arc Flash Suits

So far, we’ve taken a look at PPE for CAT 1 & 2 tasks and layering for hazards above CAT 2 (from 8-20 cal/cm2). Today, our host Scott Margolin is joined by special guest Rich Gojdics, Vice President of Business Development at Enespro PPE, to answer frequently-asked questions about PPE […]

August 24, 2021

Arc Week Season 2, Ep. 2: Hidden Dangers – 3 Things to Know About Layering Above CAT 2

In both shark diving and industrial electrical work, risks exist on a scale. As we learned in Episode 1, when we recognize a greater hazard, we must increase our personal protective equipment (PPE) – including our arc-rated (AR) clothing system and other PPE – accordingly. For hazards above CAT 2 […]

August 23, 2021

Arc Week Season 2, Ep. 1: Shark-Rated vs. Arc-Rated – Matching PPE to the Hazard

Today, we’re taking a deep dive on personal protective equipment (PPE): Do I need it? When? What PPE do I need, and how do I match it to the hazard? Believe it or not, swimming with sharks can tell us a lot about PPE for working with arcs and how […]

August 20, 2021

Do Zippers and Buttons Factor into Ebt Ratings?

Thanks to everyone who submitted questions to be answered in our FR FAQ series. The question we’re answering today was submitted by Charlie S. from Pennsylvania, who asks: What effect do zippers and buttons have on arc ratings, specifically break open ratings? As you may know, there are two ways […]

August 19, 2021

Diving Deeper: Arc Week Season 2

Arc Week is back, and better than ever. This year, we’re taking the action to new depths; throughout the week we’ll be joined by a number of industry experts, who will share their expertise with us. And, at the end of the week, they’ll all join us for an actual […]

August 17, 2021

Dangers of Improper Wear: Episode 3 – Non-FR Meltable Bras

As part of our Improper Wear series, we’re looking at meltable base layers – which includes non-FR under shirts and anything else you might wear under your arc rated and flame resistant (AR / FR) shirt(s), such as a bra. The manikin shown in the video below is wearing a […]

August 13, 2021

Should Layered AR / FR Clothing Be Tucked in?

Thanks to everyone who submitted questions to be answered in our FR FAQ series. The question we’re answering today was submitted by Derek S. from Arizona. It is: Do I need to tuck in my arc-rated / flame resistant (AR / FR) clothing while wearing an AR / FR base […]

August 10, 2021

Dangers of Improper Wear: Episode 2 – Base Layers Should Not Melt!

Streetwear base layers are usually constructed from popular, man-made fabrics such as nylon, polypropylene, or spandex. When wearing these fabrics underneath arc-rated and flame resistant (AR / FR) clothing, you are at risk of serious injury, and we’re going to tell – and show –you why. When exposed to the […]

August 3, 2021

Dangers of Improper Wear: Episode 1 – Insect Repellents

Welcome to episode #1 of our Dangers of Improper Wear blog and video series! Let’s join our guide, Tyndale’s Vice President of Technical, Scott Margolin as he explains today’s improper wear topic: Insect Repellents. We focus on the differences between two insect repellents – and discover the impact each has on […]

July 27, 2021

Dangers of Improper Wear: Arc Flash

Mistakes happen. But mistakes made when it comes to how you wear your arc-rated and flame resistant (AR / FR) clothing can mean the difference between walking away from an accident and being seriously injured – or worse – in such an event. Follow our Dangers of Improper Wear series […]

July 20, 2021

How It’s Tested: Episode 21 – Insulating Rubber Gloves

Electrical insulating gloves provide important protection against serious injury and even death. That’s why in this week’s episode of How It’s Tested, glove expert and VP of International Sales and Marketing at National Safety Apparel, Vladimir Ostrovsky, joins us to discuss all things related to insulating gloves. Tune in as […]

June 15, 2021

How It’s Tested: Episode 20 – ASTM F2621, Arc Flash Ensemble Testing

Before they’re offered for sale in the marketplace, arc-rated (AR) garments and Personal Protective Equipment (PPE) are tested individually to assess their performance and ensure they deliver the arc flash protection that’s needed to keep workers exposed to arc flash safe. But, if you’re involved in specifying and purchasing that […]

June 8, 2021

How It’s Tested: Episode 19 – ASTM F2178, Arc-Rated Eye and Face Protection

If you work alongside the arc flash hazard, chances are you’re used to wearing a balaclava and face shield – particularly when you’re completing PPE category (CAT) 1 and CAT 2 work. Have you ever wondered how these items are tested, or what standard ensures these items – as well […]

May 25, 2021

How It’s Tested: Episode 18 – ‘EH’ Two Letters That Shouldn’t Be Taken Lightly

Joining us again for this episode of How It’s Tested is Heath Hunter, Director of Industrial Sales at Ariat. Heath brings his protective footwear expertise to our discussion on electrical hazard (EH) rated boots. In part 1 of our How It’s Tested series on protective footwear we touched on impact […]

May 18, 2021

How It’s Tested: Episode 17 – Why Footwear Testing Matters

We’re getting into the nitty gritty of testing to explain how protective footwear is tested! You’ll first need to know which two standards govern protective footwear. These standards are ASTM F2412, Standard Test Methods for Foot Protection and ASTM F2413, Standard Specification for Performance Requirements for Protective (Safety) Toe Cap […]

April 20, 2021

How It’s Tested: Episode 15 – Fabric Color Tests

So far, our How It’s Tested series has covered everything from critical tests related to the protective qualities of arc-rated and flame resistant (AR / FR) garments, to why you should care about the tests your garments pass. Now, we’re diving into some topics that you might be less familiar […]

April 13, 2021

How It’s Tested: Episode 14 – ASTM F2733 for Flash Fire Rainwear

Our How It’s Tested series recently covered why ASTM F1891 is the critical compliance criteria specific to arc-rated (AR) rainwear, so this week we’re covering the flash fire rainwear equivalent – ASTM F2733. ASTM F2733 is the standard specification for flame resistant (FR) rainwear for protection against flame hazards. Beware […]

April 6, 2021

How It’s Tested: Episode 13 – Why ASTM F1891 is the Critical Compliance Criteria for AR Rainwear

ASTM F1891 is the Standard Specification for Arc rated (AR) and Flame Resistant (FR) Rainwear – and you don’t want to confuse it with ASTM F 1506 (AR Clothing) or D6413 (Vertical Flame). ASTM F1891 provides test methods, performance criteria and purchasing information for rainwear designed to protect workers from […]

March 30, 2021

How It’s Tested: Episode 12 – What Does It Mean to be UL Certified?

If you’ve been following our How it’s Tested series, you’ve learned about the four (4) main NFPA 2112 tests, and the “other” or lesser-known tests and our series continues with UL certification. Did you know that 2112 garment compliance requires third-party certification? But, the tests we’ve previously covered are fabric […]

March 23, 2021

How It’s Tested: Episode 11 – The “Other” NFPA 2112 Tests

If you’ve been following our How it’s Tested series, you’re aware of the four (4) main NFPA 2112 tests. But, did you know there are a dozen other tests that help determine garment performance? Today we’re diving into some of these other tests, and explaining why they are so important. […]

March 16, 2021

How It’s Tested: Episode 10 – The Pass/Fail Tests in NFPA 2112

We’re breaking down the various tests in NFPA 2112 for flash fire protection. Now that we’ve taken a closer look at “the Manikin Test” (ASTM F1930) – the most well-known of the tests, we’re turning our attention to the other three main fabric tests in the standard. Scott Margolin, Vice […]

March 9, 2021

How It’s Tested: Episode 9 – ASTM F1930, The Flash Fire Manikin Test

In any environment where you’re at risk of being exposed to a flash fire, you must always stay alert. Keeping aware of your environment, and knowing the flash fire protection standards can save your life in the event of a flash fire. If you work alongside the risk of a flash […]

March 2, 2021

How It’s Tested: Episode 8 – The Basics of NFPA 2112

If you’re working in an environment where you are at risk of being exposed to a flash fire (a sudden, intense fire which is short in duration but severe in potential danger) you should be aware of the flash fire protection standards set in place to keep workers safe. NFPA […]

February 23, 2021

How It’s Tested: Episode 7 – ASTM F1959, The Arc Rating Test

As we learned in previous How It’s Tested episodes, ASTM F1506 establishes minimum performance requirements for flame resistance, arc rating, and mechanical durability, using two main tests and a series of smaller test to identify fabrics that comply. In this post, we’re concentrating on one of the two main tests […]

February 16, 2021

How It’s Tested: Episode 6 – ASTM F2621, The Half Manikin Test

Welcome to a new episode in our How It’s Tested series. Last week, we put a lens on the ASTM F1506 mechanical tests which are used to ensure fabric has the strength it needs to reliably deliver the arc flash protection you trust with your life. Today’s episode focuses on […]

February 9, 2021

How It’s Tested: Episode 5 – ASTM F1506, Part 2: The “Gut Check” for AR Clothing

If you work alongside an arc flash hazard each day, you’ve got guts. Your electric arc protection should too! That’s where ASTM F1506 comes in: it identifies arc-rated flame resistant (AR / FR) fabrics with the right performance properties to be worn for arc flash protection. In our last post […]

February 2, 2021

How It’s Tested: Episode 4 – ASTM F1506, Part 1: The Big Two Tests for Arc Protection

One of the main standards for arc flash-protective clothing is ASTM F1506, Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs. But don’t be distracted by its long formal name. Known more commonly as “the Arc Standard” or […]

January 29, 2021

How Does Tyndale Keep up with Supply During COVID-19?

Despite the digits in COVID-19, it unfortunately remains a hot topic as we settle into this new year. If your company is looking to evaluate your current or a potential arc rated and flame resistant (AR / FR) clothing supplier anytime soon, it’s vital to ask questions that effectively evaluate […]

January 26, 2021

How It’s Tested: Episode 3 – OEKO-TEX® 100 (What is it and why should you care?)

OEKO-TEX® 100 is the preeminent standard for determining if fabrics and textiles contain unsafe chemicals, and passing OEKO-TEX 100 delivers assurance to wearers that any chemicals that are present in the clothing they’re wearing are well within the established safe thresholds. Rest assured, all fabric used to manufacture your Tyndale […]

January 19, 2021

How It’s Tested: Episode 2 – The Vertical Flame Test, Straight Up

The Vertical Flame Test, ASTM D6413, determines whether a fabric is flame resistant or not, which makes it the test when it comes to arc rated and flame resistant (AR / FR) apparel. It’s important to note that there are other “flame resistance” tests in the market but ASTM D6413 […]

January 12, 2021

How It’s Tested: Episode 1 – The Hierarchy of Safety Standards

There are many AR/FR standards, each directing key guidelines for safety. Understanding how they work together to inform and support employee safety is important. Collectively, the testing standards as a whole resemble a pyramid, starting at the top with standards from OSHA. Join us as we break down the hierarchy […]

January 8, 2021

FRC: How It’s Tested – All Things Testing

You trust your arc-rated and flame resistant (AR / FR) clothing with your life, and for good reason: AR / FR from qualified suppliers like Tyndale undergoes rigorous testing to ensure it will perform as expected in the event of an arc flash or flash fire. But what are the […]

November 17, 2020

How It’s Made: From Start to Finish – FRC Design, Patternmaking, and Manufacturing Explained

Now that we’ve seen how arc-rated and flame resistant (AR / FR) fibers are generated, then spun yarn and woven into fabric, and how arc and flame resistance are imparted along the way, you may be wondering: how is fabric made into the finished garment I’m wearing today? The process […]

November 11, 2020

How It’s Made: How FRC is Engineered to Keep You Safe

So far in FRC: How it’s Made, we’ve seen how fibers are generated, then spun into yarn and woven into fabric. But what is the process to impart arc and flame resistance? Scott Margolin, Vice President of Technical, delves into the process – explaining the difference between inherent and treated […]

November 3, 2020

How It’s Made: How to Make AR / FR Fabric in Three (3) Steps

This is the first post in our series, FRC: How Its Made. In this post we’ll make our way through the fiber generation, yarn spinning, and fabric weaving processes to see how fibers are transformed into fabric that’s used to make arc-rated and flame resistant clothing (known as “AR / […]

October 30, 2020

Tyndale Presents – FRC: How It’s Made

It’s easy to take everyday essentials for granted – even clothes! For those who wear arc-rated and flame resistant clothing (known as “AR / FR clothing” or simply “FRC”) on the job, the garments you put on every day protect you from injury – and are the last line of […]

October 27, 2020

SHOCKtober Episode 4: Gloves, Boots, and Eyewear – Not a Costume, PPE!

Welcome to Episode 4 of SHOCKtober – a month-long series focusing on electric shock hazards. In this final episode, we are joined by a very special guest in the spirit of Halloween. Let’s see what one of Hollywood’s top experts on electricity and Tyndale’s VP of Technical, Scott Margolin, have […]

October 20, 2020

SHOCKtober Episode 3: Who You Gonna Call for Rubber Goods?

Welcome to Episode 3 of SHOCKtober – a month-long series focusing on electric shock hazards. Voltage-rated gloves are a vital component of any shock protection program. For this episode, we are joined by a very special guest and Subject Matter Expert (SME), Rich Gojdics, Vice President of Business Development at […]

October 13, 2020

SHOCKtober Episode 2: Save Your Sole(s) with E–H Rated Boots

Welcome to Episode 2 of SHOCKtober – a month-long series focusing on electric shock hazards. One of the key items in your shock PPE tool kit is safety boots because, as our VP of Technical, Scott Margolin, says in Episode 2 below, being safe starts from the ground up. As […]

October 6, 2020

SHOCKtober Episode 1: Unmasking the Standards – What OSHA and 70E Say About Electric Shock

All month long, Tyndale is taking a slight detour from our normal coverage of arc flash hazards to talk about the other electrical hazard – electric shock. This is the first in our four-part SHOCKtober series. As stated in our previous post, electric shock causes hundreds of fatalities and thousands […]

October 2, 2020

Tyndale Presents SHOCKtober: Are You Prepared for a Shock?

Welcome to SHOCKtober! All month long, Tyndale is taking a brief but important detour from our normal coverage of arc flash and flash fire hazards and focusing on electrical shock hazards. This is the introduction to our four-part series, which covers: Unmasking the Standards: What OSHA and 70E Say About […]

August 14, 2020

Arc Week Season 1, Ep. 5: Arc Attack Files

Though Arc Week is meant to be interesting and unique, arc flash incidents are deadly serious and the real world implications of “swimming in dangerous waters” without the right PPE are severe. So far our series has focused on “arc bites” on manikins in the lab, but arcs happen to […]

August 13, 2020

Arc Week Season 1, Ep. 4: When Arcs Attack; Defending Yourself from an Arc

Sharks are miraculous hunters, but they’re nowhere near as dangerous to humans as TV and movies would have you believe. The fact is, electric arcs injure more people each year in the United States than sharks do – and usually more severely. Interestingly, almost none of the shark attack injuries […]

August 12, 2020

Arc Week Season 1, Ep. 3: Arc Infested Work Zones – Your Lifeguard is NFPA 70E

In his free time, Vice President of Technical Scott Margolin has spent 30 years diving with some of the world’s most dangerous sharks. But even after all of those successful encounters, Scott would never enter the waters without taking all relevant safety measures and working with the best dive guides […]

August 11, 2020

Arc Week Season 1, Ep. 2: Arc Bites – Inside an Arc Rating

When planning to dive with sharks, the size, species, and number of sharks – as well as the possible dive conditions – determine the type and amount of PPE you’ll need to wear. The higher the risk of the dive, the more PPE you need to wear. The same is […]

August 10, 2020

Arc Week Season 1, Ep. 1: Great White Arcs Caught on Camera

Just as you wouldn’t swim with Great Whites without a shark cage, you don’t want to be caught THIS close to an arc without the right PPE. But you don’t have to simply take our word for it – sometimes seeing is believing. The arc rating standard is an excellent […]

August 4, 2020

Dive In: Arc Week Season 1

What do sharks and electric arcs have in common? Join us to find out! This summer, the tides have washed in unprecedented world events and stressors that have been felt by one and all. Tyndale presents Arc Week: a week-long educational look at the world of arc flash hazards through […]

July 22, 2020

FRC Suppliers During the COVID-19 Crisis – Quality of Service

Service is the last of our four main topics in our series. When you sign a contract you expect to get a level of service matching the levels proposed. During a crisis, is your supplier able to maintain the same levels of service? Are you noticing a decline in service […]

July 15, 2020

FRC Suppliers During the COVID-19 Crisis – Supply Chain

Breakdowns in supply chains can have a critical impact on your operational capacity. Almost every product we purchase comes to us through a supply chain supported by multiple vendors. If one of these businesses has an issue during a crisis, the entire supply chain can be affected, and products can […]

July 13, 2020

What Should I Look For In AR/FR Rainwear?

This is the final post in a three-part series examining the 2020 hurricane season and the importance of protecting workers with the right AR / FR rainwear promptly – particularly as COVID-19 has impacted supply levels. Review the season projections in our first post, and explore quality products and service […]

July 8, 2020

FRC Suppliers During the COVID-19 Crisis – Is Your Supplier Financially Stable?

Because of COVID-19 and the ensuing economic losses, businesses have endured changes to how they operate, how they manage their workforce, and have needed to re-evaluate budgets and revenue streams which drastically changed over only a few short months. Financial stability is a key issue facing FRC providers, so how […]

July 6, 2020

AR/FR Rainwear You Can Trust for Hurricane Season

This is the second post in a three-part series examining the importance of protecting workers with the right AR / FR rainwear during the 2020 hurricane season particularly as COVID-19 has impacted supply levels. Review the season projections in our first post, and look out for our next post to […]

July 1, 2020

FRC Suppliers During the COVID-19 Crisis – Safety

Last week we introduced our five-part blog series, FRC Suppliers During the COVID-19 Crisis. This series gives you resources critical to evaluating your FRC supplier to ensure you have access to the services and products to function most efficiently – particularly during a crisis. Because of COVID-19, there have been […]

June 29, 2020

How to Get Ahead of Hurricane Season

The NOAA’s Climate Prediction Center has forecasted another above-normal Atlantic hurricane season in 2021, after increasing the number of storms considered “average” in the Atlantic basin, with a possible return of La Nina later in the 2021 season. COVID-19 continues to play a role in the global supply chain this […]

June 26, 2020

FRC Safety During COVID-19: Do Industry Standards Incorporate FR Face Masks?

Emergent Standard Updates Present a Path to ASTM- and NFPA-compliance for Face Masks Normal life today looks a bit different than it did a few short months ago, as face masks have become an important way to curb the spread of COVID-19. Correspondingly, as utility, energy infrastructure, and other vital […]

June 24, 2020

Evaluating Your FRC Supplier During the COVID-19 Crisis – Introduction

The COVID-19 pandemic has been one of the most disruptive events in the past 100 years. A global quarantine has brought drastic changes to the way we live, shop, and interact with our world. Apart from those tragically impacted by the virus, retailers have been hit especially hard. Traditional purchasing […]

June 22, 2020

Top 3 Unintended Consequences of Choosing Uniform Rental

This is the final post in our series examining the industry’s shift away from uniform rental (“rental”) programs with industrial laundry for arc-rated and flame resistant (“AR / FR”) clothing, a closer look at misconceptions that sometimes lead companies to select rental for AR / FR clothing, and unintended consequences […]

April 27, 2020

Uniform Rental Program Convenience: Myth or Reality?

This is the fourth post in our series examining the industry’s shift away from uniform rental (“rental”) programs with industrial laundry for arc-rated and flame resistant (AR / FR) clothing. Here, we take a closer look at misconceptions that sometimes lead companies to select rental for AR / FR clothing, […]

March 23, 2020

Are Uniform Rental Programs Cost-Effective?

This is the third post in our series examining the industry’s shift away from uniform rental (“rental”) programs with industrial laundry for arc-rated and flame resistant (AR / FR) clothing, a closer look at misconceptions that sometimes lead companies to select rental for AR / FR clothing, and unintended consequences […]

March 17, 2020

Is Uniform Rental with Industrial Laundry Necessary for AR / FR Clothing?

This is the second post in our series examining the industry’s shift away from uniform rental (“rental”) programs with industrial laundry for arc-rated and flame resistant (AR / FR) clothing, a closer look at misconceptions that sometimes lead companies to select rental for AR / FR clothing, and unintended consequences […]

March 13, 2020

Should I Wear FR Outerwear Over FR Clothing?

Yes! We published a blog post on what to wear under your flame resistant (FR) clothing, and today, we’re sharing what you should be wearing over your FR clothing. The answer: FR outerwear. During the cooler months, it’s important to wear outerwear to protect yourself from the elements and avoid […]

March 10, 2020

Four Reasons Why FR Managed Programs Are Better Than Uniform Rental Programs

Managed apparel programs provide many benefits to businesses and employees alike. Many AR / FR clothing (arc rated / flame resistant clothing) wearers enjoy the convenience, choice, and ease of use of a managed program, where garments are chosen by the wearer from a catalog of options approved by management, […]

March 5, 2020

How Well Does an Arc Rated Garment Perform After 100 Washes?

We are frequently asked about the durability of flame resistance of arc rated garments. Do my arc rated garments lose their protective ability as I wash them after each use? All FR and AR garments sold by Tyndale are guaranteed flame resistant for the service life of the garment. To […]

March 2, 2020

Tyndale’s Laundry Options

What Laundry Option Works Best for Your Company? Everyone wants to be comfortable in their work clothing, and the single largest driver of comfort is choice. When people select their own garments they are more likely to wear them, and follow proper use and care instructions. Tyndale’s managed allowance programs […]

February 27, 2020

Does My AR/FR Rainwear Meet The Right Standard?

Note: We cover this topic in a more recent post: Which Standards Should My AR / FR Rainwear Pass? Shopping for arc-rated and flame resistant (AR/FR) rainwear? Take a VERY close look at the label. Some rainwear sold on the market as flame resistant is tested and labeled to comply […]

February 20, 2020

How Well Does Tyndale’s Versa Line Perform During An Arc Flash?

Tyndale recently debuted our new clothing line, The Versa Collection. This line of Tyndale-made FRC focuses on comfort and style while delivering the safety and performance you expect to keep you safe on the job. Curious to know how this contemporary line of FR clothing fared during a real-word arc […]

February 7, 2020

What Does Arc Flash Testing Look Like? An Introduction to Tyndale’s Newest Video Series

We believe seeing is believing. That’s why we continually invest in real world demonstrations to visualize why wearing arc-rated flame resistant clothing – and wearing it properly – matters. As part of this commitment, we are pleased to share our latest Arc Flash Video Series. These test videos display the […]

January 16, 2020

NFPA 2112 Pass/Fail Test Series Part 3: The Vertical Flame Test

Welcome to our four-part blog series about the pass/fail testing requirements for NFPA 2112 compliance. NFPA 2112 is also known as the “flash-fire standard,” and there are four tests which a garment or fabric must pass to receive this accreditation. Watch Tyndale’s VP of Technical Scott Margolin describe this test […]

June 11, 2019

NFPA 2112 Pass/Fail Test Series Part 2: The Heat Transfer Performance Test

May 28, 2019

NFPA 2112 Pass/Fail Test Series Part 1: The Manikin Test

Welcome to our four-part blog series about the pass/fail testing requirements for NFPA 2112 compliance. NFPA 2112 is also known as the “flash-fire standard,” and there are four tests which a garment or fabric must pass to receive this accreditation. They are: The Manikin Test The Vertical Flame Test The […]

January 30, 2019

Tyndale’s 2018 Top 10 Blog Posts

We hope your new year is off to a wonderful start! 2018 was a great year for innovation and education in the FR clothing industry. We’ve gone through our blog and highlighted some picks just for you. Here’s a look back at our top-10 posts from 2018. 1) Witness the […]

October 5, 2018

October 5, 2018

How It’s Made: Tyndale Shirt Edition

Tyndale sells tens of thousands of flame resistant (FR) shirts to workers around the country each year. If you’re a Tyndale customer, you probably have more than one of those shirts in your closet – or you may even be wearing one right now. It’s a no-brainer that the clothing we […]

September 24, 2018

The Cost of Providing Arc Flash Protection

So far in this series, we have explored the many costs of an arc flash incident, the frequency of arc flash incidents, and the economic costs involved. Now we’d like to take a look at how you can mitigate the damage – both personal and economic – in the event […]

September 5, 2018

What Does an Arc Flash Injury Actually Cost Your Business?

So far we’ve looked at all the various costs an arc flash event can generate and just how often such events occur. Now we’d like to explore the economic impact an arc flash injury can have on your business. By far the greatest cost of any arc flash injury or […]

August 27, 2018

How Common are Arc Flash Incidents?

In our last post, we took a broad overview of the various costs associated with an arc flash event. But how often do arc flashes, let alone related injuries or death, actually occur. Many managers and owners justify their decision to not provide workers with arc rated, flame resistant (AR/FR) […]

August 15, 2018

The Many Costs of an Arc Flash Incident

Being caught in an arc flash incident can result in devastating primary costs on an unprotected worker. At best, an employee’s life and that of their family is turned upside down as they undergo a long, painful recovery and rehab process. At worst, a family is left coping with the […]

July 18, 2018

Summer Safety – 5 Tips to Avoid Heat Stroke

For those whose jobs require them to work outside – electric utility, oil and gas, and other industry workers – it’s not all “fun in the sun” during the summer months. Our summer safety blog series covers insect-repelling FR clothing and thunderstorm safety. In this post, we’re sharing some of the risks […]

June 25, 2018

summer safety series - thunderstorm safety

June 25, 2018

Summer Safety – Best Practices for Staying Safe in a Thunderstorm

For those whose jobs require them to work outside – electric utility, oil and gas, and other industry workers – it’s not all “fun in the sun” during the summer months. Our summer safety blog series covers insect-repelling FR clothing and how to avoid heat stroke. In this post, we’re sharing […]

June 18, 2018

Summer Safety – Permethrin-Treated FR Clothing

It’s that time of year again! Between cookouts, pool parties, vacations, and other warm weather activities, people are spending more time outdoors. But for those whose jobs require them to work outside – electric utility, oil and gas, and other industry workers – it’s not all “fun in the sun” […]

June 8, 2018

June 8, 2018

Auditing the Final Inventory

This is the final post in a five-part series sharing common-sense strategies that have worked for other companies when they have moved on from rental contracts. Read our first post, and follow along with our series: Rental Laundry Programs, Understanding Program Responsibilities, and Managing Garment Inspection and Turn-In to learn more about each […]

May 30, 2018

May 30, 2018

Managing Garment Inspection and Turn-in

This is the fourth post in a five-part series sharing common-sense strategies that have worked for other companies when they have moved on from rental contracts. Read our first post, and follow along with our series: Rental Laundry Programs, Understanding Program Responsibilities, and Auditing the Final Inventory to learn more about each step. […]

Protective Boots

By Wearer Count:

A Solution for Every Company Size

Industries

Hazards

Technical

Videos

Industry Insights

Customer Support

Watch Tyndale, Ariat & PBR Stars

Visit a Store

Get Started

Careers With Tyndale

Protective Boots

By Wearer Count:

A Solution for Every Company Size

Industries

Hazards

Technical

Videos

Industry Insights

Customer Support

Watch Tyndale, Ariat & PBR Stars

Visit a Store

Get Started

Careers With Tyndale

Protective Boots

By Wearer Count:

A Solution for Every Company Size

Industries

Hazards

Technical

Videos

Industry Insights

Customer Support

Watch Tyndale, Ariat & PBR Stars

Visit a Store

Get Started

Careers With Tyndale

Protective Boots

By Wearer Count:

A Solution for Every Company Size

Industries

Hazards

Technical

Videos

Industry Insights

Customer Support

Watch Tyndale, Ariat & PBR Stars

Visit a Store

Get Started

Careers With Tyndale