Industrial Electrical Archives

October 6, 2026

Arc Flash Incidents Reported in the News Highlight Ongoing Electrical Safety Risks

When arc flash incidents appear in the news one at a time, they can seem isolated. Viewed together, they tell a more concerning story. Tyndale found 18 arc flashes that made the TV news over the 17 months since OSHA released the new arc flash guidance involving commercial and industrial […]

August 12, 2026

The Best of Arc Week: The Five Episodes Every Electrical Worker Should See

This year, we’re revisiting the best of Arc Week with five fan-favorite, must-watch arc flash safety episodes that remain critical following the latest OSHA arc flash guidance—and have only grown more important with time due to today’s rapidly-increasing demand for electricians.

April 9, 2026

What Is a Calorie in FR Clothing? (Arc Rating Explained)

In the context of arc-rated and flame-resistant (AR/FR) clothing, a calorie is a unit of heat energy—not related to food, but to thermal exposure from hazards like arc flashes and flash fires. Technically, one calorie is the amount of energy required to raise one cubic centimeter of water by 1°C. […]

September 26, 2025

NEC 2026: Arc-Flash Labels Become Mandatory

Arc-flash labeling isn’t new. What’s changed is that in 2026, they won’t just be recommended or enforced indirectly—they’ll be mandated by the National Electric Code (NEC) itself. NEC 2026 introduces a critical change: permanent arc-flash labels will be mandatory on specific electrical equipment. Here’s what you need to know, why […]

April 25, 2025

Do I Need AR PPE for Low Voltage Work?

When you hear “low voltage,” it’s easy to assume low risk — but that assumption can be dangerous, even fatal. Most arc flash injuries occur on systems rated at 480 volts and below, where electrical work is frequent, and PPE is often overlooked due to the false belief that “low […]

March 6, 2025

Do I Need Arc-Rated PPE to Open an Energized Breaker Panel?

If you’re doing any kind of electrical work, you may be exposed to arc flash hazards. Even environments typically considered “low risk,” like opening an energized breaker panel, can pose the threat of an arc flash incident and cause life-threatening harm. That’s why OSHA’s latest Arc Flash Guidance, released in […]

January 15, 2025

Fundamentals of Arc Flash: Introduction

In November 2024 OSHA released new guidance to improve arc flash safety amongst commercial, industrial, and residential electricians and operators, maintenance, and others working on or near exposed energized electrical parts. Behind the new guidance is a chilling fact: preventable arc flash injuries continue to occur amongst inside electricians at […]

December 20, 2024

Webinar Recap: Tyndale and Safety + Health Magazine Discuss OSHA’s New Arc Flash Guidance

OSHA recently released its new arc flash guidance in 20 years, aiming to reduce preventable arc flash injuries amongst commercial, industrial, and residential electricians – with major implications for “de-energized” and low voltage work. Scott Margolin, Tyndale’s Vice President of Technical and Chairman of the Board of the Partnership for […]

November 25, 2024

BREAKING: OSHA ISSUES NEW ARC FLASH SAFETY GUIDANCE

Breaking news: OSHA has just released new guidance on arc flash safety – for the first time in almost 20 years. Recognizing the continued prevalence of preventable arc flash injuries and fatalities despite longstanding safety standards and proven PPE the guidance is designed to better protect commercial, industrial, and residential […]

October 18, 2024

Learn How a Survivor’s Story Can Transform Electrical Safety Training

Working in or around an electrical environment means understanding the critical importance of wearing arc-rated and flame resistant (AR / FR) clothing. But safety doesn’t stop there – comprehensive training is just as essential. That’s why we’re excited to introduce to you a 6-Hour NFPA 70E Electrical Safety Training brought […]

October 11, 2024

NFPA 70E’s “Big 3” Tenets for Worker Protection

NFPA 70E Standard for Electrical Safety in the Workplace is the primary standard for commercial and industrial electricians in the United States today, and we’re often asked what it says about protecting workers. Though the answer is more comprehensive and detailed than can be digested in one sitting, its core […]

July 23, 2024

Developing: New OSHA Arc Flash Guidance Expected

OSHA recently confirmed it’s actively working to close a gap in arc flash protection for up to 750,000 commercial and industrial electricians who are not currently given the PPE they need to stay safe on the job – counter to recognized industry standards. In fact, the Assistant Secretary for Occupational […]

May 31, 2024

What is an “Adequately Rated” Meter According to NFPA 70E?

NFPA 70E is a vital standard for establishing practical and safe workplaces in order to avoid electrical hazards. Within NFPA 70E, the phrase “adequately rated meter” pops up frequently. The term “adequately rated” is often misunderstood throughout industries that follow NFPA 70E and use electrical testing meters. Read on to […]

May 30, 2024

A Bigger, Better Shopping Experience in Texas

At Tyndale our goal is to make it quick and easy for workers to get the quality, comfortable arc-rated and flame resistant (AR / FR) clothing they need to stay safe on the job. Our latest Factory Store & Service Center – our biggest yet – does just that for […]

May 10, 2024

Empowering Women in Energy: Tyndale’s Commitment to Safety and Inclusivity

In today’s dynamic workplaces, diversity, inclusion, and safety are paramount. At Tyndale, a woman-owned business dedicated to providing high-quality protective apparel, we recognize the pivotal role that women play in the workforce, particularly in traditionally male-dominated energy industries. That’s why we were thrilled to extend a warm welcome to members […]

April 5, 2024

Discover the Ultimate Retail Destination for AR/FR Clothing: TyndaleFRC.com!

At Tyndale, safety is our top priority. We understand the importance of providing arc-rated and flame-resistant (AR / FR) clothing that not only meets safety standards but exceeds expectations for comfort, durability, and style. That’s why we’re thrilled to announce the launch of our newly improved retail website, TyndaleFRC.com, designed […]

February 16, 2024

Enespro 40cal Suit Faces Off Against DC Arc – Witness the Power!

Navigating energized electrical environments comes with the inherent risk of direct current (DC) arc flash hazards. When working in this environment, it is critical to be equipped with proper PPE that ensures your safety. Curious about the resilience of an Enespro arc flash suit when it encounters an oncoming DC […]

January 26, 2024

Trending in 2023: Tyndale’s Top Videos

Each year, our VP of Technical, Scott Margolin, brings our viewers relevant industry education through our technical video library. Scott’s extensive experience and knowledge provide Tyndale with unmatched technical expertise. As our Vice President of Technical, Scott serves as Tyndale’s lead resource for any technical questions or issues that arise. […]

January 19, 2024

Trending in 2023: Tyndale’s Top Blogs

Each year, we leverage our industry-leading blog and videos to provide in-depth educational content. Whether it’s answering technical questions or addressing common safety concerns, we’re dedicated to updating management and workers on the latest developments in the arc-rated and flame resistant (AR / FR) clothing industry. Our posts are backed […]

January 16, 2024

Arc Bites: Energized Work – Great Power, Great Responsibility

Years ago, remembers William Watson – Vice President of Safety at Miller Electric and Chairman of the NECA Large Contractor Safety Group, NFPA 70E required electricians to send copies of paperwork for completed energized work to their employers for retention. In those days, William often observed inaccuracies in the paperwork […]

January 9, 2024

Arc Bites: Defending Against the Jaws of Arc Flash with Equipment Maintenance

“There’s not an electrician in the world that can walk up to a gray panel and say, oh, it looks like the incident energy for this piece of equipment would be about… let’s call it a seven. You don’t know. You’ve got to do a coordination study. You need to […]

November 8, 2023

Arc Bites: The Comfort Factor

In the world of workplace safety, comfort is often an overlooked, yet essential, criteria for selecting Personal Protective Equipment (PPE). When it comes to arc-rated and flame resistant (AR / FR) clothing, comfort is not a luxury, it’s a necessity. Arc Bite Round Table Discussion: The Comfort of PPE In […]

September 29, 2023

Testing the Heat: Advanced Thermal Analysis Facilities

When it comes to personal protective equipment (PPE) for individuals working in hazardous environments, the importance of arc-rated and flame resistant (AR/FR) clothing cannot be overstated. These specialized garments are designed to protect wearers from arc flash and flash fire hazards encountered in utility, oil and gas, and other industries. […]

June 30, 2023

EVs and the DC Hazard: Non-AR Hi-Vis Vest & Outerwear in a DC Arc

Welcome to our BONUS episode of EVs and the DC Hazard with Scott Margolin, Vice President of Technical at Tyndale. Today, we are focusing on the importance of understanding the risks associated with wearing flammable high-visibility (hi-vis) vests and outerwear in the presence of a DC arc. Many people in […]

June 29, 2023

3 Innovative Trends in Workplace Safety

In honor of National Safety Month, we’re taking the time to reflect on how far we’ve come as a community to improve workplace safety for those exposed to arc flash, flash fire, and other hazards. Today, workers harness the power of choice through access to a variety of innovative garment […]

June 21, 2023

EVs and the DC Hazard: 88/12 Outerwear in a DC Arc

We’re ending our series with a bang! In today’s episode we test a 9 oz. arc-rated (AR) windbreaker made with an 88% cotton and 12% nylon (“88/12”) blend, exposing it to high incident energy levels. Prepare to witness the extraordinary protective capabilities of this AR outerwear as it withstands and […]

June 20, 2023

EVs and the DC Hazard: NSA Enespro® 40 cal Suit in a DC Arc

What happens in a DC arc when the potential incident energy is high enough to require an arc suit instead of dailywear? We set out to find out. In today’s leading-edge demonstration, we subject an NSA Enespro® 40 cal arc suit to a DC arc with high incident energy. Join […]

June 15, 2023

EVs and the DC Hazard: 88/12 CAT 2 Coverall in a DC Arc

Today we’re switching it up: instead of testing shirts and pants against DC arcs, we test the significance of DC arcs against AR 88/12 CAT 2 coveralls. Coveralls made from an 88/12 fabric blend – that is, a fabric that’s 88% AR/FR cotton and 12% nylon – are commonly used […]

June 14, 2023

EVs and the DC Hazard: EBT AR Garment Exposed Above Arc Rating

In our previous episode, we showed you how Tyndale’s FRMC® arc-rated (AR) shirt and jeans perform in a DC arc flash. Explore the Boundaries of DC Arcs Hold on tight as we push the limits! We’re intentionally subjecting an energy breakopen threshold (EBT) AR garment, rated at 9.1 calories, to […]

June 13, 2023

EVs and the DC Hazard: Tyndale FRMC® CAT 2 Outfit in a DC Arc

In our previous episode, we pushed an NSA TECGEN® CAT 2 AR shirt and a pair of AR jeans to their limits by subjecting them to a thrilling DC arc. And they passed with flying colors, effectively extinguishing fire and eliminating any breakopen risks. Get Ready for an Electrifying Episode […]

June 8, 2023

EVs and the DC Hazard: NSA TECGEN® CAT 2 Outfit in DC Arc

In our last two episodes, we tested non-protective polyester/cotton blend and 100% cotton fabrics to see how they perform in the face of a DC arc. But how do popular arc-rated (AR) garments perform in DC arcs at or near their arc ratings? Follow along with our next few episodes […]

June 7, 2023

EVs and the DC Hazard: Cotton Workwear in a DC Arc

Many people think that 100% cotton is okay to wear when there’s an arc hazard because it doesn’t melt. But is that true? Can a DC arc flash ignite flammable 100% cotton workwear, and does it require any more or less energy than an AC arc to do so? Plug […]

June 6, 2023

EVs and the DC Hazard: Poly/Cotton Workwear in a DC Arc

Did you know that polyester and cotton (“poly/cotton”) blend is one of the most common fabric choices for making non-protective workwear? In fact, this type of fabric is being worn by many people who work in and around EVs. But what happens to poly/cotton fabric when it’s exposed to a […]

May 23, 2023

5 Key Benefits of a Choice Clothing Program

The power of choice applies to just about every area of life – whether it’s choosing what to eat for dinner, what to watch on TV, or what car to buy. It also applies to arc-rated and flame resistant (AR / FR) clothing that employees wear to stay safe on […]

May 19, 2023

What are the Best Resources for Electrical Safety?

May is National Electrical Safety Month. Each year, electrically related incidents disrupt livelihoods and families due to injuries, deaths, and property losses. Currently, over 750,000 industrial electrical workers are not using proper protection. This number is even more alarming because NFPA 70E, Standard for Electrical Safety in the Workplace – […]

May 12, 2023

Decoding the Language of Standards: Should vs. Shall

The recent promotion of NFPA 70B from a guide to a standard carries significant implications for electrical maintenance. We recently published a blog that reviews this status change in detail. This upgrade is an opportune time to address a question we often receive: In the context of industry standards, what’s […]

May 10, 2023

EVs and the DC Hazard: AC vs DC Arc Flash – What’s the Difference?

Technology has a habit of outpacing understanding of hazards and safety; DC arc flash is no exception. With the rapid rise of EVs, DC power is expanding exponentially in the USA. DC battery manufacturing, energy storage and DC-to-DC charging are all growing rapidly, and battery replacement, maintenance, and repairs are close behind. […]

May 10, 2023

Introducing EVs and the DC Hazard

As the electric vehicle (EV) market continues to grow, so does the importance of understanding the potential hazards associated with direct current (DC) electrical systems. That’s why Tyndale is proud to launch our new educational series, EVs and the DC Hazard. Whether you are a battery manufacturer, work in battery […]

May 9, 2023

The Rise of Electrification: OSHA’s Revisiting of Arc Flash Guidance

Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. Tyndale’s Rise of Electrification series highlights the growing demand for electricians in the United States. In parts one and two, we discussed the significance of this trend and its implications for […]

May 5, 2023

What are Tyndale’s Top Safety Tips for Summer 2023?

Summer is right around the corner! And while we typically enjoy many fun summertime activities, such as going to the beach, hiking, and camping, the season also presents some safety issues. Stormy weather, heat-related illnesses, skin damage from the sun’s UV rays, and bug bites require extra precautions, which are […]

May 3, 2023

Rise of Electrification: Demand for Electrical Maintenance Requires Safety Awareness

In the first episode of Tyndale’s Rise of Electrification blog mini-series, we covered how the increased adoption of electrification is having a positive impact on the job market for electricians. The recent passing of the Infrastructure Investment and Jobs Act is a momentous step towards a sustainable future for the […]

April 26, 2023

The Rise of Electrification: How it’s Transforming the Job Market for Electricians

Welcome to The Rise of Electrification, a three-part series that explores the current state of electrification in the US and studies several key impacts of the growing demand for electricity both now and in the near future. The world is currently in the midst of an electrification revolution. Electrification refers […]

April 18, 2023

Tyndale Honors Linemen April 18th for National Lineman Appreciation Day

National Lineman Appreciation Day was celebrated for the first time in 2013 after the U.S. Senate approved Resolution 95 recognizing and honoring linemen for the “contributions of these brave men and women who protect public safety.” Join Tyndale today along with electric utilities, friends, and family across the nation in […]

April 6, 2023

What Changes Now That NFPA 70B is a Standard?

Did you hear the news? NFPA 70B, Standard for Electrical Equipment Maintenance, was recently upgraded from a guide – that is a recommended practice indicating what you should do – to a standard, making it a requirement indicating what you shall do. In our last post we took a look […]

March 31, 2023

How Does NFPA 70B Fit with NFPA 70 and NFPA 70E?

Last week we shared that NFPA 70B, Standard for Electrical Equipment Maintenance, was recently upgraded from a guide – that is a recommended practice indicating what you should do, to a standard – making it a requirement indicating what you shall do. As a result, there is a strong likelihood […]

March 24, 2023

BREAKING: NFPA 70B Status Change

You’ve heard of NFPA 70, the National Electric Code – the benchmark for safe electrical design, installation, and inspection to protect people and property from electrical hazards. This standard guides non-utility electrical work, setting the rules for commercial and industrial electricians. However, it doesn’t focus on safe work practices or […]

February 1, 2023

What is a Stoll Curve?

As a woman-owned company, Tyndale is dedicated to celebrating and supporting women in the industry. Our popular Women in Power Series shines a light on the growing number of women working in the field today. But whether in the spotlight or behind the scenes, women have played an integral role […]

January 20, 2023

The Top 5 FR FAQ’s of 2022

In case you needed another reason to love Fridays, here’s a good one: it’s our FR FAQ day! Every Friday, we promote a blog post highlighting the answer to a frequently-asked question (FAQ). In each, you’ll find helpful information on topics like the hazards you face, the arc-rated and flame […]

January 12, 2023

Tyndale’s Top Products of 2022

As we leave 2022 behind, we have compiled the year’s statistics to see which Tyndale items were our top sellers. Looking for a new favorite arc-rated and flame resistant (AR / FR) garment or two to add to your 2023 wardrobe? Check out the list below for our most popular […]

January 6, 2023

Trending in 2022: Tyndale’s Top 5 Blogs & Videos

At Tyndale, arc-rated and flame resistant (AR / FR) clothing is our core competency, enabling us to leverage our expertise and 40+ years of experience to provide valuable educational resources to protect workers. Our industry-leading blog and videos provide in-depth educational content to answer technical questions and address common safety […]

January 3, 2023

OSHA’s Top 10 Safety Violations List for Fiscal Year 2022

In the new year, make it your resolution to improve your company’s workplace safety. The Occupational Safety and Health Administration (OSHA) released its Top 10 most frequently cited standards for the fiscal year (FY) of 2022, which runs from Oct. 1, 2021 to Sept. 30, 2022. This list is a […]

December 13, 2022

Women in Power: How Pam Costello Serves Workers – and Advances Women’s AR / FR

In this episode of Women in Power, our host, Sarah Steel, Director of Online Marketing and Events, sits down with a woman who enhances the Pam Costello serves as Product Development Manager at Tyndale. With a background in fashion design and past experience designing women’s maternity wear and safety and […]

December 9, 2022

Tyndale’s Top 6 Most Comfortable FR Clothing for Men and Women

The expectation that arc-rated and flame resistant (AR / FR) clothing is comfortable as well as protective is common amongst today’s wearers. Accordingly, the demand for off-the shelf comfort has increased, highlighting the importance of thoughtful design that provides ease of mobility for both men and women as they perform […]

December 6, 2022

Now Available & Ready to Ship: New Winterwear by Norse

Named for the Vikings – who lived in cold, harsh climates that hovered on the edge of survivability – these new arc-rated and flame resistant (AR / FR) outerwear items by Norse stand ready to keep you and your workers safe as you brave the elements this winter:

December 2, 2022

Arc Ratings for FR Clothing: What is the Difference Between ATPV and EBT?

To better understand arc ratings – what they are and the difference between the two ways they are measured – we define them below and link back to Tyndale’s Arc Week Season 3, which covers the science behind all things arc flash. What is an Arc Rating? Simply put, an […]

November 30, 2022

Women in Power: How Tina and Melinda from Carhartt Company Gear Address Trends in Women’s PPE

Michigan natives, Tina Picciuto-Norris and Melinda Fabry, Global Product Design Manager and PPE Merchandiser from Carhartt Company Gear share what led them to their careers at the leading workwear brand in this two-for-one interview. Tune in to interview 9, hosted by Tyndale’s Director of Online Marketing and Events, Sarah Steel: […]

November 11, 2022

Lockout/Tagout Makes OSHA’s Top 10 Safety Violations List for Fiscal Year 2022 – Again

OSHA’s preliminary list of the Top 10 Safety Violations for 2022 has been announced, and lockout/tagout made the list again. With 1,977 violations cited related to OSHA 1910.147 – the control of hazardous energy (lockout/tagout) – noncompliance with this standard comes in sixth place on the list of most frequently […]

November 4, 2022

UPDATE: Where does OSHA Stand on Expanding Protections for Indoor Electricians?

Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. More than 500,000 Americans working on or near energized industrial electrical equipment today do not have protection from deadly arc flash hazards, despite safety standards that have been in place for […]

September 20, 2022

Women in Power: Susan Glynn – Embracing Experiences and Challenges to Lead Ariat’s Women’s Workwear Line

As the first member of Ariat’s apparel team, Susan Glynn reflects on her 20-year career at the women-owned performance apparel brand while reminiscing on inspiration from her past that have driven her to excel in her current role as Vice President of Apparel Design and Development. Susan shares how her […]

September 13, 2022

Proud to Protect Canada – Episode 12: CSA Z195 & Jurisdictional Regulations Governing Protective Footwear

In previous episodes of our Proud to Protect Canada series, we reviewed the safety standards and jurisdictional requirements governing arc-rated and flame resistant (AR / FR) clothing and we looked at high visibility safety apparel (HVSA) standards and provincial regulations. In this final episode of our series, we examine CSA […]

September 2, 2022

Arc Week Season 3, Ep. 5: Shooting Down the Myth of “De-energized Work”!

If you’ve ever said the words, “we don’t work energized”, or heard those words, this episode is a must watch. To shoot down the myth of de-energized work, tune in to hear from four industry experts as they explain why, for commercial and industrial electricians and electrical workers in other […]

September 1, 2022

Arc Week Season 3, Ep. 4: Who Wins in a Dog Fight? ATPV vs. EBT Explained

In Episode 3, we went behind the scenes at the arc flash testing lab, Kinectrics, to see great balls of fire, better known as arc flashes. There we demonstrated exactly what happens to flame resistant (FR) fabric when an arc flash takes place and covered how to determine the arc […]

August 31, 2022

Arc Week Season 3, Ep. 3: Great Balls of Fire – Live at the Arc Ratings Lab

We’re taking you on a journey to spend a day in the arc ratings lab, and what better way to do it than to take you to the facility that makes it all happen? Kinectrics is the world’s leader in life cycle management for the electric utility industry, and where […]

August 30, 2022

Arc Week Season 3, Ep. 2: Return to the Danger Zone – Determining Arc Flash Energy Part 2

In today’s episode, we’re diving right in to the three remaining variables that determine arc incident energy level. Watch the video below, featuring your Arc Week host, Scott Margolin as he explains what fighter jets, shark teeth, and shark feeding zones have in common with cycle time, arc gap, and […]

August 29, 2022

Arc Week Season 3, Ep. 1: Welcome to the Danger Zone – Determining Arc Flash Energy Part 1

Arcs are clearly dangerous, but the question is, how dangerous? How do we determine how big a given arc, at a given set of energies, out of a given piece of equipment will be? What is arc incident energy? Arc incident energy is the potential magnitude of an arc flash. […]

August 24, 2022

From the Bottom Up: Arc Week Season 3

It’s that time of year again, Arc Week Season 3 is here and filled with content you won’t want to miss, plus references to a movie some might consider Tom Cruise’s best work. As we dive into the danger zone, Scott Margolin, your Arc Week Host and Tyndale’s VP of […]

August 17, 2022

Proud to Protect Canada – Episode 11: Can a Canadian Company Buy AR / FR Clothing from an American Company?

If you’ve been following along in our Proud to Protect Canada series, you’ve heard our resident experts talk through some fundamental topics like – why wear arc-rated and flame resistant (AR/FR) clothing, what are arc flash hazards and related standards, what are flash fire hazards and related standards, and how […]

July 20, 2022

Proud to Protect Canada – Episode 9: Jurisdictional Regulations for Arc-Rated Flame Resistant (AR / FR) Clothing

Regulations for arc-rated and flame resistant (AR / FR) clothing vary slightly across Canada’s provinces. At their core, they align with general, federal requirements while expanding to provide additional best practices that, all together, give us a straightforward takeaway to understanding and ensuring compliance. It’s important to note that the […]

June 24, 2022

What’s New with Tyndale’s Garment Labels?

Garment labels for all kinds of clothing are essential to ensure you’ve received the correct size and have instructions for caring for and washing the garment properly. While standard labeling for arc-rated and flame-resistant (AR / FR) clothing is equally important, we believe that labeling for garments that protect workers […]

June 17, 2022

What’s the Difference Between a Test, Practice, Guide, and Specification?

Navigating your way through the language in a standard can be dizzying enough. Add the fact that there are several different types of standards and it’s easy to get a little lost. This is why we’re taking the time to share the six different types of standards under ASTM while […]

May 19, 2022

Women in Power: Why Alicia Rogers Chooses to Work Outside Her Home State

Alicia Rogers had many jobs before she landed her career as a lineman but there was always one element missing – being outdoors. A job in the tree industry, cutting tree limbs away from power lines, initially sparked her interest in linework. After two years on a waiting list, she […]

May 13, 2022

What is the NSUJL?

NSUJL stands for the National Sisterhood United for Journeymen Linemen, an nonprofit organization started in 2012 by a group of linewives who were motivated to help families of fallen and injured lineworkers. Today the organization is dedicated to assisting fallen or injured IBEW Journeymen Linemen, Utility Linemen, Apprentice Linemen, Groundmen, […]

May 10, 2022

Proud to Protect Canada – Episode 7: What Is a Standard and How Do They Come to Fruition in Canada?

In previous episodes of our Proud to Protect Canada series, we reviewed the safety standards governing PPE and protective clothing related to arc flash and flash fire hazards and the Canadian standard governing high-visibility safety apparel. In the video below, watch Tyndale Canada Sales Director, Paul Castelli and Tyndale Vice President of Corporate Strategy & Technical, Scott […]

May 10, 2022

Women in Power: Tamara Caponegro – Insights from a Woman Who Knows PPE for Women Who Wear PPE

As Vice President of Sales at Tyndale for more than 15 years, Tamara Caponegro has had a front row seat in the industry’s progress toward better serving women in the field – and has played an active role. Hear from Tamara in her own words about her own career as […]

April 27, 2022

Proud to Protect Canada – Episode 6: High-Visibility and Reflective Striping (CSA Z96)

In previous episodes of our Proud to Protect Canada series, we reviewed the safety standards governing PPE and protective clothing related to arc flash and flash fire hazards. In this episode, we’ll turn our attention to the Canadian standard governing high-visibility safety apparel, CSA Z96. In the video below, Tyndale […]

March 15, 2022

Proud to Protect Canada – Episode 3: What is CSA Z462?

In Episode 2 of our Proud to Protect Canada series, Tyndale’s Canada Sales Director, Paul Castelli, and VP of Technical, Scott Margolin, answer the question, what is an arc flash. Beyond the definition, they discussed what causes an arc flash, the dangers associated with an arc flash, and how to […]

March 11, 2022

What is NFPA 70 and how does it relate to NEC and NESC?

In previous posts, we explained the National Electric Code (NEC) and the National Electric Safety Code (NESC). Today, we’re focusing on NFPA 70E and how it relates to those codes. There’s even an easy-to-read comparison chart so you can see the differences at a glance. We’ll start with a high-level […]

March 3, 2022

What is the NESC?

It’s common for safety codes and standards to be confused or misunderstood. The acronyms can look similar, and you might wonder how they differ or relate. In today’s post, we explain the National Electric Safety Code (NESC) – not to be confused with the National Electric Code (NEC), which we […]

March 1, 2022

Proud to Protect Canada – Episode 2: Arc Flash Hazards

As Tyndale extends our managed arc-rated and flame resistant (AR / FR) clothing programs into Canada, we invite you to follow along in our Proud to Protect Canada series. While many of the topics in this series contain Canadian-specific content, there are some topics that are relevant on both sides […]

February 25, 2022

What is the NEC?

There are a lot of safety standard acronyms out there and they can often be confused or misunderstood. In this post, we’re focusing on the National Electric Code (NEC). In future posts, we cover the National Electric Safety Code (NESC) and how the NEC and NESC relate to NFPA 70E. […]

February 18, 2022

BREAKING: What’s the Latest from OSHA and PES on Arc Flash?

Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. More than 500,000 of Americans working on or near energized industrial electrical equipment today do not have protection from the deadly arc flash hazard, despite safety standards that have been […]

February 15, 2022

Proud to Protect Canada – Episode 1: Why Wear AR / FR Clothing?

We’re going back to basics to answer a fundamental question, “Why wear FR?” This topic transcends borders and applies to workers exposed to thermal hazards everywhere – so it’s critical to understand. It’s true, AR / FR clothing works as the “last line of defense” in the event of an […]

February 8, 2022

Proud to Protect Canada Series: Introduction

In case you missed it, Tyndale is expanding into the Canadian market! We are eager to serve Canadian-based companies who want to take advantage of our exclusive program, which supports compliance with both Canadian and US industry safety standards. Tyndale’s new Canadian Sales Director, Paul Castelli, is leading our initiative […]

January 18, 2022

Top 3 Recent Changes to AR/FR Clothing Standards

As you know, the ongoing pandemic has impacted every single area of life. As a result, it is no surprise that the past two years have been relatively quiet in terms of major changes to safety standards with impact to arc-rated and flame resistant (AR / FR) clothing requirements. Tyndale […]

November 12, 2021

Can Arc Ratings Be Added to Calculate Protection?

Tyndale-made arc-rated and flame resistant (AR / FR) garments feature an external label to indicate the garment’s protective ratings. These ratings explain two critical pieces of information about your AR / FR clothing: The Calorie Rating (CAL) – the level of protection the garment delivers The PPE Category (CAT) – […]

November 9, 2021

The Dangers of Improper Wear: Episode 10 – Non-FR Hoodie Over AR/FR Clothing

If you’ve ever been tempted to reach for a non-FR hoodie to wear over your AR / FR to the jobsite on a chilly morning, you’re not alone: unfortunately, this mistake is common – especially in fall and spring, when it tends to be chilly in the morning and warms […]

November 5, 2021

What Are the Changes to ASTM F2413-18?

If the PPE you wear each day includes protective footwear, you’ve probably noticed the ASTM F2413 label in one of your safety shoes or work boots. ASTM F2413 defines minimum performance requirements for footwear to protect against various workplace hazards. Updates were made to this standard in 2018, resulting in […]

November 2, 2021

The Dangers of Improper Wear: Episode 9 – The Chimney Effect

On the jobsite, head to toe coverage is critical for complete, lifesaving protection. In Episode 4 of The Dangers of Improper Wear – Untucked AR / FR Shirts, we looked at Flash Fire and Arc Flash Safety Standards to confirm that YES, you should always tuck in your arc-rated and […]

October 29, 2021

What Do Companies Say About Tyndale as a Supplier?

At Tyndale, we have five core values that drive our mission, support our decisions, and are key to our successes. One of these core values is “The Customer.” Each and every decision at Tyndale is made according to its impact on our existing and potential customers. We strive for internal […]

October 7, 2021

Spicing-up the Tyndale Product Offering This Fall

We’re spicing up our product offering with new Tyndale items coming fall 2021 and early 2022. These new flame resistant (FR) clothing options enhance comfort, while offering durability, and most importantly, protection. From jeans that fit all body types comfortably to layering options for cool weather – we’ve added one […]

September 28, 2021

The Dangers of Improper Wear: Episode 8 – Why a Partially Unbuttoned AR Shirt May Not Fully Protect

Join our host, Scott Margolin, as he uncovers the consequences of failing to fully button your arc-rated or flame resistant (AR/FR) shirt. Improperly wearing your AR / FR clothing could be the difference between injury or leaving the jobsite safely if exposed to an arc flash or flash fire hazard. […]

September 24, 2021

Congress Urges OSHA to Act on AR / FR Clothing for Industrial Electricians

Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. An arc flash can reach temperatures four times hotter than the surface of the sun, but we can avoid virtually all fatal and catastrophic arc flash injuries with arc-rated and flame […]

September 21, 2021

The Dangers of Improper Wear: Episode 7 – Missing the AR Garment and Hazard Match

The common theme in our Dangers of Improper Wear series is ensuring that the garments you put on each day are worn properly and provide adequate protection against the hazards you face at work. Whether you’re faced with potential flash fire or arc flash hazards, wearing protective gear properly could […]

September 17, 2021

How Long has Tyndale Been in Business?

On September 4, 2021, Tyndale celebrated its 40-year anniversary. Since 1981, Tyndale has supplied increasingly personalized, coordinated, and convenient arc-rated and flame resistant clothing (AR / FR) solutions to leading corporations and their employees. We are exceptionally proud of this milestone and what it means to play a key role […]

September 14, 2021

The Dangers of Improper Wear: Episode 6 – Consequences of Using the Wrong Rainwear Standard

Dress Confidently for Arc-flash Hazards with ASTM F1891-Rated Protective Rainwear Before you invest in arc-rated or flame resistant (AR / FR) rainwear it is important you’re aware of the standard that the garment passes to allow it to make its FR claim. Specifically, rainwear tested to ASTM D6413, the “Vertical […]

September 7, 2021

The Dangers of Improper Wear: Episode 5 – Non-AR Outerwear Over CAT 2 Garments

In today’s episode, we’re looking at the consequences of wearing flammable outerwear over AR garments. In this case, a flammable high-visibility vest and jacket over CAT 2 arc-rated (AR) dailywear. The video below graphically shows the consequences of wearing flammable clothing over quality AR clothing. So, be sure to watch […]

September 3, 2021

How do You Stay Up to Speed on Industry Information?

We’re so excited to celebrate Tyndale 500! Not quite the famous, 500-mile racecar event you may be familiar with. We recently reached (and quickly exceeded) 500 posts on HERE, our industry-leading blog! All thanks to you – our readers – for cheering us on! Unlike Daytona, we’re not stopping at […]

August 31, 2021

Dangers of Improper Wear: Episode 4 – Untucked AR/FR Shirts

Are You Required to Tuck-in Your AR / FR Shirt? The answer is YES, you should always tuck-in your arc-rated and flame resistant (AR / FR) shirts. We’ll show you why it’s so important in this week’s episode from our Dangers of Improper Wear series. Watch the video below for […]

August 27, 2021

Arc Week Season 2, Ep. 5: Respect Your Environment – Swimming with Sharks and Working with Arcs

In this episode, our host Scott Margolin, Vice President of Technical, is on location in Jupiter, Florida, where he’s joined by arc flash experts Hugh Hoagland of ArcWear and Kinectrics, Rich Gojdics of Enespro PPE, and Jason Iannelli of the Electrical Training Alliance (ETA) and International Brotherhood of Electrical Workers […]

August 26, 2021

Arc Week Season 2, Ep. 4: Famous Sharks & Arcs Through History

In this episode, Special guest Duane Siders, Chief Revenue Officer at National Safety Apparel (NSA), joins Tyndale’s Scott Margolin to look back at some of the most famous arcs in history – and how far we’ve come. But not before we look back at some of the most famous sharks […]

August 25, 2021

Arc Week Season 2, Ep. 3: “You’re Gonna Need a Bigger Boat” – CAT 3 & 4 Arc Flash Suits

So far, we’ve taken a look at PPE for CAT 1 & 2 tasks and layering for hazards above CAT 2 (from 8-20 cal/cm2). Today, our host Scott Margolin is joined by special guest Rich Gojdics, Vice President of Business Development at Enespro PPE, to answer frequently-asked questions about PPE […]

August 24, 2021

Arc Week Season 2, Ep. 2: Hidden Dangers – 3 Things to Know About Layering Above CAT 2

In both shark diving and industrial electrical work, risks exist on a scale. As we learned in Episode 1, when we recognize a greater hazard, we must increase our personal protective equipment (PPE) – including our arc-rated (AR) clothing system and other PPE – accordingly. For hazards above CAT 2 […]

August 23, 2021

Arc Week Season 2, Ep. 1: Shark-Rated vs. Arc-Rated – Matching PPE to the Hazard

Today, we’re taking a deep dive on personal protective equipment (PPE): Do I need it? When? What PPE do I need, and how do I match it to the hazard? Believe it or not, swimming with sharks can tell us a lot about PPE for working with arcs and how […]

August 20, 2021

Do Zippers and Buttons Factor into Ebt Ratings?

Thanks to everyone who submitted questions to be answered in our FR FAQ series. The question we’re answering today was submitted by Charlie S. from Pennsylvania, who asks: What effect do zippers and buttons have on arc ratings, specifically break open ratings? As you may know, there are two ways […]

August 19, 2021

Diving Deeper: Arc Week Season 2

Arc Week is back, and better than ever. This year, we’re taking the action to new depths; throughout the week we’ll be joined by a number of industry experts, who will share their expertise with us. And, at the end of the week, they’ll all join us for an actual […]

August 17, 2021

Dangers of Improper Wear: Episode 3 – Non-FR Meltable Bras

As part of our Improper Wear series, we’re looking at meltable base layers – which includes non-FR under shirts and anything else you might wear under your arc rated and flame resistant (AR / FR) shirt(s), such as a bra. The manikin shown in the video below is wearing a […]

August 13, 2021

Should Layered AR / FR Clothing Be Tucked in?

Thanks to everyone who submitted questions to be answered in our FR FAQ series. The question we’re answering today was submitted by Derek S. from Arizona. It is: Do I need to tuck in my arc-rated / flame resistant (AR / FR) clothing while wearing an AR / FR base […]

August 3, 2021

Dangers of Improper Wear: Episode 1 – Insect Repellents

Welcome to episode #1 of our Dangers of Improper Wear blog and video series! Let’s join our guide, Tyndale’s Vice President of Technical, Scott Margolin as he explains today’s improper wear topic: Insect Repellents. We focus on the differences between two insect repellents – and discover the impact each has on […]

July 27, 2021

Dangers of Improper Wear: Arc Flash

Mistakes happen. But mistakes made when it comes to how you wear your arc-rated and flame resistant (AR / FR) clothing can mean the difference between walking away from an accident and being seriously injured – or worse – in such an event. Follow our Dangers of Improper Wear series […]

July 23, 2021

How Does Tyndale Create Live Arc Flash Demonstrations?

Tyndale is known for being a leading provider of arc-rated and flame resistant (AR / FR) clothing. Did you know we also perform live arc flash testing to ensure the FR garments we sell perform as expected under real-world conditions? In today’s FR FAQ, we explore why and how Tyndale […]

July 20, 2021

How It’s Tested: Episode 21 – Insulating Rubber Gloves

Electrical insulating gloves provide important protection against serious injury and even death. That’s why in this week’s episode of How It’s Tested, glove expert and VP of International Sales and Marketing at National Safety Apparel, Vladimir Ostrovsky, joins us to discuss all things related to insulating gloves. Tune in as […]

July 1, 2021

What is Protex?

Flame-resistant (FR) innovation spans centuries, with the concept of flame-resistant materials dating back to ancient Greece. Our modern understanding of FR has advanced substantially over the past 25 years. Today we’re discussing a fiber brand that has been a part of almost every major FR innovation over the past decade. […]

June 24, 2021

Have AR/FR Questions? We Have the Answers.

FR FAQ is one of our most popular email series here at Tyndale. Every Friday, we pick an unanswered question about arc-rated flame resistant (AR / FR) clothing and do deep-dive explaining topics from proper wear, best practices, safety standards, and requirements, to how your AR / FR clothing protects […]

June 18, 2021

How Did Tyndale Handle COVID-19 Safety?

As part of National Safety Month, we’re highlighting a new safety topic each Friday in June. There was one safety topic that remained front and center over the course of the past year – you guessed it, arc-rated (AR) and flame resistant clothing (FRC) safety. As COVID-19 unfolded, everyone entered […]

June 15, 2021

How It’s Tested: Episode 20 – ASTM F2621, Arc Flash Ensemble Testing

Before they’re offered for sale in the marketplace, arc-rated (AR) garments and Personal Protective Equipment (PPE) are tested individually to assess their performance and ensure they deliver the arc flash protection that’s needed to keep workers exposed to arc flash safe. But, if you’re involved in specifying and purchasing that […]

June 8, 2021

How It’s Tested: Episode 19 – ASTM F2178, Arc-Rated Eye and Face Protection

If you work alongside the arc flash hazard, chances are you’re used to wearing a balaclava and face shield – particularly when you’re completing PPE category (CAT) 1 and CAT 2 work. Have you ever wondered how these items are tested, or what standard ensures these items – as well […]

June 4, 2021

What is the Partnership for Electrical Safety?

Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. If you didn’t know, June is National Safety Month. As we discuss all things safety this month, we’ve decided to take a moment to focus on a new player in the […]

June 1, 2021

What is Tyndale Doing to Further Electrical Safety?

May was National Electrical Safety month and today marks the beginning of National Safety Council’s Safety Month, but at Tyndale protecting workers from arc flash is at the heart of what we do every moment of every day. Beyond providing lifesaving arc-rated (AR) clothing and PPE to thousands of electricians, […]

May 28, 2021

How Does Tyndale Support Its Industry Partners?

As both a manufacturer and distributor, Tyndale prides itself on offering the best product choice in the industry, which supports compliance and satisfaction through our unique arc rated and flame resistant (AR / FR) clothing programs. In order to continue offering extensive choice, we are proud to partner with leading […]

May 25, 2021

How It’s Tested: Episode 18 – ‘EH’ Two Letters That Shouldn’t Be Taken Lightly

Joining us again for this episode of How It’s Tested is Heath Hunter, Director of Industrial Sales at Ariat. Heath brings his protective footwear expertise to our discussion on electrical hazard (EH) rated boots. In part 1 of our How It’s Tested series on protective footwear we touched on impact […]

May 18, 2021

How It’s Tested: Episode 17 – Why Footwear Testing Matters

We’re getting into the nitty gritty of testing to explain how protective footwear is tested! You’ll first need to know which two standards govern protective footwear. These standards are ASTM F2412, Standard Test Methods for Foot Protection and ASTM F2413, Standard Specification for Performance Requirements for Protective (Safety) Toe Cap […]

May 11, 2021

How it’s Tested: Episode 16 – ANSI 107 and High-Visibility Garments

High-visibility AR / FR clothing is an important category of personal protective equipment (PPE) because it not only protects you from arc flash and/or flash fire hazards but it enhances your visibility as you perform important job functions. This is particularly important in low-light and/or high-traffic areas. ANSI/ISEA 107 provides […]

April 20, 2021

How It’s Tested: Episode 15 – Fabric Color Tests

So far, our How It’s Tested series has covered everything from critical tests related to the protective qualities of arc-rated and flame resistant (AR / FR) garments, to why you should care about the tests your garments pass. Now, we’re diving into some topics that you might be less familiar […]

April 13, 2021

How It’s Tested: Episode 14 – ASTM F2733 for Flash Fire Rainwear

Our How It’s Tested series recently covered why ASTM F1891 is the critical compliance criteria specific to arc-rated (AR) rainwear, so this week we’re covering the flash fire rainwear equivalent – ASTM F2733. ASTM F2733 is the standard specification for flame resistant (FR) rainwear for protection against flame hazards. Beware […]

March 30, 2021

How It’s Tested: Episode 12 – What Does It Mean to be UL Certified?

If you’ve been following our How it’s Tested series, you’ve learned about the four (4) main NFPA 2112 tests, and the “other” or lesser-known tests and our series continues with UL certification. Did you know that 2112 garment compliance requires third-party certification? But, the tests we’ve previously covered are fabric […]

March 26, 2021

Does a Non-FR Base Layer Count Toward Arc Rating?

Questioning whether or not your non-flame resistant (non-FR base layer counts towards a system arc rating? This blog post gives you the answer and helps you determine the proper garments to wear as a base layer when calculating a layered arc rating. The answer is no – a non-FR base […]

March 23, 2021

How It’s Tested: Episode 11 – The “Other” NFPA 2112 Tests

If you’ve been following our How it’s Tested series, you’re aware of the four (4) main NFPA 2112 tests. But, did you know there are a dozen other tests that help determine garment performance? Today we’re diving into some of these other tests, and explaining why they are so important. […]

March 12, 2021

What’s Better: Coveralls vs. Shirts and Pants

As “the last line of defense” in the event of an arc flash or flash fire – when all other safety measures have been unsuccessful in preventing an incident – the arc rated flame resistant (AR / FR) clothing you decide to wear is critical to your safety on the […]

March 9, 2021

How It’s Tested: Episode 9 – ASTM F1930, The Flash Fire Manikin Test

In any environment where you’re at risk of being exposed to a flash fire, you must always stay alert. Keeping aware of your environment, and knowing the flash fire protection standards can save your life in the event of a flash fire. If you work alongside the risk of a flash […]

March 5, 2021

What’s Best for AR / FR Clothing: Metal or Plastic Zippers?

As you get dressed for work, you look down and notice a zipper on your arc rated flame resistant (AR / FR) clothing. You wonder, is this safe? Should it be metal? Or, plastic? The answer is fairly simple. Metal and plastic zippers are safe to be on AR / […]

February 26, 2021

How Does Tyndale Vet and Audit the Products We Sell?

As you know, arc-rated and flame resistant (AR / FR) garments are very different from everyday clothing you find in most stores. These specialized garments are made using flame-resistant fabrics, must comply with all relevant safety standards, and are required to be labeled properly. With all that goes into these […]

February 23, 2021

How It’s Tested: Episode 7 – ASTM F1959, The Arc Rating Test

As we learned in previous How It’s Tested episodes, ASTM F1506 establishes minimum performance requirements for flame resistance, arc rating, and mechanical durability, using two main tests and a series of smaller test to identify fabrics that comply. In this post, we’re concentrating on one of the two main tests […]

February 19, 2021

Do AR / FR Shirts Need to be Tucked in?

If you’re required to wear arc-rated or flame resistant (AR / FR) clothing, the first step in protecting yourself is making sure you’re wearing the clothing properly. It’s important to note that aside from risking your safety by not wearing AR / FR correctly, you are also out of compliance […]

February 16, 2021

How It’s Tested: Episode 6 – ASTM F2621, The Half Manikin Test

Welcome to a new episode in our How It’s Tested series. Last week, we put a lens on the ASTM F1506 mechanical tests which are used to ensure fabric has the strength it needs to reliably deliver the arc flash protection you trust with your life. Today’s episode focuses on […]

February 12, 2021

Should FR Clothing Embellishments Be Flame Resistant?

Many companies who require arc rated or flame resistant (AR / FR) clothing for employees also require that the clothing be branded with their company logo and/or personalized with the employee’s name. One question we get asked often is, do embroidery and patches on AR / FR clothing need to […]

February 9, 2021

How It’s Tested: Episode 5 – ASTM F1506, Part 2: The “Gut Check” for AR Clothing

If you work alongside an arc flash hazard each day, you’ve got guts. Your electric arc protection should too! That’s where ASTM F1506 comes in: it identifies arc-rated flame resistant (AR / FR) fabrics with the right performance properties to be worn for arc flash protection. In our last post […]

February 5, 2021

Top 5 FR FAQ’s 2020

Our FR FAQ Fridays are your source for industry-specific news, Tyndale updates, and – most importantly – the information you and your workers need to stay safe. Our top five (5) blog posts from 2020 hit on every area of Tyndale’s expertise and deliver information to aid in the success […]

February 2, 2021

How It’s Tested: Episode 4 – ASTM F1506, Part 1: The Big Two Tests for Arc Protection

One of the main standards for arc flash-protective clothing is ASTM F1506, Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs. But don’t be distracted by its long formal name. Known more commonly as “the Arc Standard” or […]

January 29, 2021

How Does Tyndale Keep up with Supply During COVID-19?

Despite the digits in COVID-19, it unfortunately remains a hot topic as we settle into this new year. If your company is looking to evaluate your current or a potential arc rated and flame resistant (AR / FR) clothing supplier anytime soon, it’s vital to ask questions that effectively evaluate […]

January 26, 2021

How It’s Tested: Episode 3 – OEKO-TEX® 100 (What is it and why should you care?)

OEKO-TEX® 100 is the preeminent standard for determining if fabrics and textiles contain unsafe chemicals, and passing OEKO-TEX 100 delivers assurance to wearers that any chemicals that are present in the clothing they’re wearing are well within the established safe thresholds. Rest assured, all fabric used to manufacture your Tyndale […]

January 19, 2021

How It’s Tested: Episode 2 – The Vertical Flame Test, Straight Up

The Vertical Flame Test, ASTM D6413, determines whether a fabric is flame resistant or not, which makes it the test when it comes to arc rated and flame resistant (AR / FR) apparel. It’s important to note that there are other “flame resistance” tests in the market but ASTM D6413 […]

January 12, 2021

How It’s Tested: Episode 1 – The Hierarchy of Safety Standards

There are many AR/FR standards, each directing key guidelines for safety. Understanding how they work together to inform and support employee safety is important. Collectively, the testing standards as a whole resemble a pyramid, starting at the top with standards from OSHA. Join us as we break down the hierarchy […]

January 8, 2021

FRC: How It’s Tested – All Things Testing

You trust your arc-rated and flame resistant (AR / FR) clothing with your life, and for good reason: AR / FR from qualified suppliers like Tyndale undergoes rigorous testing to ensure it will perform as expected in the event of an arc flash or flash fire. But what are the […]

January 5, 2021

Tyndale’s Top 10 Blog Posts of 2020

Happy New Year and welcome to 2021! We hope this year is filled with joy and prosperity. We’ve recapped our most popular blogs from 2020, detailing the year that was from the world of arc rated and flame resistant (AR / FR) clothing. Let’s countdown the top 10!

December 18, 2020

Uniform Look in Rental vs. Purchase Program – What’s the Difference?

By definition, “uniform” means consistent, alike, and orderly. If your company requires a “uniform look” in their arc rated flame resistant (AR / FR) clothing program, can they still offer choice? “Choice,” by definition, means variety, option, and preference. So, how can companies take advantage of the power of choice […]

November 17, 2020

How It’s Made: From Start to Finish – FRC Design, Patternmaking, and Manufacturing Explained

Now that we’ve seen how arc-rated and flame resistant (AR / FR) fibers are generated, then spun yarn and woven into fabric, and how arc and flame resistance are imparted along the way, you may be wondering: how is fabric made into the finished garment I’m wearing today? The process […]

November 11, 2020

How It’s Made: How FRC is Engineered to Keep You Safe

So far in FRC: How it’s Made, we’ve seen how fibers are generated, then spun into yarn and woven into fabric. But what is the process to impart arc and flame resistance? Scott Margolin, Vice President of Technical, delves into the process – explaining the difference between inherent and treated […]

November 10, 2020

Tyndale’s COVID-19 Resources Reminder

As the COVID-19 pandemic continues, we must remain vigilant and remember to follow all procedures and recommendations to help reduce the spread of the virus. As we’ve all had to deal with these restrictions for months, it’s easy to forget or become lax in our approach to enhanced safety protocols. […]

October 30, 2020

Tyndale Presents – FRC: How It’s Made

It’s easy to take everyday essentials for granted – even clothes! For those who wear arc-rated and flame resistant clothing (known as “AR / FR clothing” or simply “FRC”) on the job, the garments you put on every day protect you from injury – and are the last line of […]

October 27, 2020

SHOCKtober Episode 4: Gloves, Boots, and Eyewear – Not a Costume, PPE!

Welcome to Episode 4 of SHOCKtober – a month-long series focusing on electric shock hazards. In this final episode, we are joined by a very special guest in the spirit of Halloween. Let’s see what one of Hollywood’s top experts on electricity and Tyndale’s VP of Technical, Scott Margolin, have […]

October 23, 2020

How Do I Determine a Safe Layered Arc Rating?

If you’re a frequent wearer of AR / FR clothing, you are familiar with what a garment’s arc rating means. If you’ve wondered how you can simply and easily increase your protection, the answer is layering. Layering is a powerful tool to achieve the protection you need with the comfort […]

October 20, 2020

SHOCKtober Episode 3: Who You Gonna Call for Rubber Goods?

Welcome to Episode 3 of SHOCKtober – a month-long series focusing on electric shock hazards. Voltage-rated gloves are a vital component of any shock protection program. For this episode, we are joined by a very special guest and Subject Matter Expert (SME), Rich Gojdics, Vice President of Business Development at […]

October 16, 2020

How Do I Order the Right Size?

When shopping online, choosing the right size for shirts, pants, outerwear, and more can sometimes feel intimidating. Luckily, Tyndale makes it easy! It’s also stress-free: if you receive an item that doesn’t fit properly, our no-charge online process makes it simple to return. Scott Margolin, Vice President of Technical, explains […]

October 15, 2020

New FRC Options Available from Every Tyndale Collection

Workers can count on Tyndale’s flame resistant clothing (FRC) Collections to provide the protection and comfort they need with the Made in USA quality they deserve. This fall we’ve enhanced each of our Collections with new items. From contemporary, fashion forward garments to tried-and true classic casual staples, and durable […]

October 13, 2020

SHOCKtober Episode 2: Save Your Sole(s) with E–H Rated Boots

Welcome to Episode 2 of SHOCKtober – a month-long series focusing on electric shock hazards. One of the key items in your shock PPE tool kit is safety boots because, as our VP of Technical, Scott Margolin, says in Episode 2 below, being safe starts from the ground up. As […]

October 6, 2020

SHOCKtober Episode 1: Unmasking the Standards – What OSHA and 70E Say About Electric Shock

All month long, Tyndale is taking a slight detour from our normal coverage of arc flash hazards to talk about the other electrical hazard – electric shock. This is the first in our four-part SHOCKtober series. As stated in our previous post, electric shock causes hundreds of fatalities and thousands […]

October 2, 2020

Tyndale Presents SHOCKtober: Are You Prepared for a Shock?

Welcome to SHOCKtober! All month long, Tyndale is taking a brief but important detour from our normal coverage of arc flash and flash fire hazards and focusing on electrical shock hazards. This is the introduction to our four-part series, which covers: Unmasking the Standards: What OSHA and 70E Say About […]

September 29, 2020

COVID-19 Risk Assessment with Changing Weather

It’s official, the fall season is upon us! The change in season brings shorter days, cooler temperatures, and more indoor activities. Although we’ve previously covered COVID-19 risk assessment, as we move indoors, different risk factors should be considered. Scientists and medical professionals continue to learn more and more about the […]

September 25, 2020

Mannequin vs. Manikin: What’s the Difference?

If you’ve been following our blog for some time, you may have noticed the word “manikin” in some of our posts about arc-rated and flame resistant (AR / FR) clothing testing. If this word looks odd to you, you’re not alone! That’s because in everyday contexts you are likely much […]

September 22, 2020

Proud to Protect: Introducing the Partnership for Electrical Safety

Since our founding more than 30 years ago, Tyndale has been dedicated to ensuring the men and women working to power our country have the comfortable, quality arc-rated and flame resistant (AR / FR) clothing they need to return home safely each night. Time and time again, we have seen […]

September 15, 2020

Are AR/FR COVID-19 Face Masks Considered PPE? – Part 2

The COVID-19 pandemic has dominated our 2020 news cycle. Wearing face masks has been proven the most effective method to significantly reduce spread of the virus. Recently, non-FR neck gaiters and balaclavas have been questioned by several studies for their effectiveness at preventing spread. One study cited appeared to claim […]

September 11, 2020

Standards Update – What’s New in 2020?

From “breaking news” to “coming soon,” Tyndale shares the latest updates (and expected updates) to main industry standards related to arc rated flame resistant (AR / FR) apparel. Watch our video below, featuring Tyndale’s Vice President of Technical, Scott Margolin, or read on to learn more. Updates to NFPA 2112, […]

September 3, 2020

Where Are Tyndale-Brand Products Made?

As a USA-based safety company we pride ourselves on manufacturing the highest quality products for workers in essential industries exposed to hazards and require arc rated flame resistant (AR / FR) clothing on the job. Tyndale goes the extra mile to manufacture garments that the American workforce is proud to […]

August 21, 2020

How Do I Know What AR/FR Rainwear Is Right For Me?

The NOAA’s Climate Prediction Center has forecasted another above-normal Atlantic hurricane season in 2021, after increasing the number of storms considered “average” in the Atlantic basin, with a possible return of La Nina later in the 2021 season. COVID-19 continues to play a role in the global supply chain this […]

August 18, 2020

Don’t Wait to Order Outerwear – The Time is Now!

Don’t Wait to Order Outerwear – The Time is Now! With so many uncertainties in our world right now, a new mindset of preparedness has emerged. People are doing their best to be ready for whatever the future holds. One way to do that is by purchasing arc rated flame […]

August 14, 2020

Arc Week Season 1, Ep. 5: Arc Attack Files

Though Arc Week is meant to be interesting and unique, arc flash incidents are deadly serious and the real world implications of “swimming in dangerous waters” without the right PPE are severe. So far our series has focused on “arc bites” on manikins in the lab, but arcs happen to […]

August 13, 2020

Arc Week Season 1, Ep. 4: When Arcs Attack; Defending Yourself from an Arc

Sharks are miraculous hunters, but they’re nowhere near as dangerous to humans as TV and movies would have you believe. The fact is, electric arcs injure more people each year in the United States than sharks do – and usually more severely. Interestingly, almost none of the shark attack injuries […]

August 12, 2020

Arc Week Season 1, Ep. 3: Arc Infested Work Zones – Your Lifeguard is NFPA 70E

In his free time, Vice President of Technical Scott Margolin has spent 30 years diving with some of the world’s most dangerous sharks. But even after all of those successful encounters, Scott would never enter the waters without taking all relevant safety measures and working with the best dive guides […]

August 11, 2020

Arc Week Season 1, Ep. 2: Arc Bites – Inside an Arc Rating

When planning to dive with sharks, the size, species, and number of sharks – as well as the possible dive conditions – determine the type and amount of PPE you’ll need to wear. The higher the risk of the dive, the more PPE you need to wear. The same is […]

August 10, 2020

Arc Week Season 1, Ep. 1: Great White Arcs Caught on Camera

Just as you wouldn’t swim with Great Whites without a shark cage, you don’t want to be caught THIS close to an arc without the right PPE. But you don’t have to simply take our word for it – sometimes seeing is believing. The arc rating standard is an excellent […]

August 4, 2020

Dive In: Arc Week Season 1

What do sharks and electric arcs have in common? Join us to find out! This summer, the tides have washed in unprecedented world events and stressors that have been felt by one and all. Tyndale presents Arc Week: a week-long educational look at the world of arc flash hazards through […]

July 31, 2020

What is the Tyndale 360° Experience?

When entering a new clothing program, your workers may have reservations about the new garments they will be required to wear. Will they like the selection? Are the garments high-quality? Will these new garments fit well, and what is the sizing like? That is why Tyndale managed programs include a […]

July 29, 2020

Lotions, Oils and Sprays – Oh My!

Updated April 8, 2022 With summer weather comes the need to protect workers from seasonal hazards like sun exposure and disease-carrying biting insects. But when arc flash or flash fire is a risk, it’s important to think twice before reaching for the products you may use off-the-clock; unfortunately, some are […]

July 27, 2020

Uniform Rental vs. Ownership: Service Issues in a Rental Program

If you’re considering entering into a rental agreement for arc-rated and flame resistant (AR / FR) clothing, beware: uniform rental with industrial laundry programs often result in service issues that directly affect the company and employees required to wear the uniforms. This blog post exposes the truth behind three key […]

July 23, 2020

Rental Contracts: 3 Tips Before You Sign

If your uniform rental (“rental”) contract is expiring soon, you’re probably in the process of deciding whether or not to renew. Or maybe you’re considering signing onto a rental program for arc-rated and flame resistant (AR / FR) for the first time. Be sure to consider these three major factors […]

July 22, 2020

FRC Suppliers During the COVID-19 Crisis – Quality of Service

Service is the last of our four main topics in our series. When you sign a contract you expect to get a level of service matching the levels proposed. During a crisis, is your supplier able to maintain the same levels of service? Are you noticing a decline in service […]

July 17, 2020

The ABC’s of FRC Repair

You’ve noticed a hole in your arc-rated or flame resistant (AR / FR) work shirt. Do you know what to do next? Luckily, knowing whether or not your AR / FR garment can be repaired is as simple as knowing your ABC’s: A) Acceptable Appearance: Consider whether or not your […]

July 15, 2020

FRC Suppliers During the COVID-19 Crisis – Supply Chain

Breakdowns in supply chains can have a critical impact on your operational capacity. Almost every product we purchase comes to us through a supply chain supported by multiple vendors. If one of these businesses has an issue during a crisis, the entire supply chain can be affected, and products can […]

July 13, 2020

What Should I Look For In AR/FR Rainwear?

This is the final post in a three-part series examining the 2020 hurricane season and the importance of protecting workers with the right AR / FR rainwear promptly – particularly as COVID-19 has impacted supply levels. Review the season projections in our first post, and explore quality products and service […]

July 8, 2020

FRC Suppliers During the COVID-19 Crisis – Is Your Supplier Financially Stable?

Because of COVID-19 and the ensuing economic losses, businesses have endured changes to how they operate, how they manage their workforce, and have needed to re-evaluate budgets and revenue streams which drastically changed over only a few short months. Financial stability is a key issue facing FRC providers, so how […]

July 6, 2020

AR/FR Rainwear You Can Trust for Hurricane Season

This is the second post in a three-part series examining the importance of protecting workers with the right AR / FR rainwear during the 2020 hurricane season particularly as COVID-19 has impacted supply levels. Review the season projections in our first post, and look out for our next post to […]

July 2, 2020

Is it Safe to Disinfect Using Bleach Around FR Clothing?

The COVID-19 pandemic has brought cleaning and sanitation to the forefront of our minds, both at home and work. First and foremost, liquid chlorine bleach is prohibited from use on all flame resistant and arc rated fabrics and apparel in common use in the USA today. Neither Tyndale nor fabric manufacturers […]

July 1, 2020

FRC Suppliers During the COVID-19 Crisis – Safety

Last week we introduced our five-part blog series, FRC Suppliers During the COVID-19 Crisis. This series gives you resources critical to evaluating your FRC supplier to ensure you have access to the services and products to function most efficiently – particularly during a crisis. Because of COVID-19, there have been […]

June 30, 2020

VIDEO: COVID-19 Safety and Risks Presentation

Over the past 12+ weeks, Tyndale’s Vice President of Technical, Scott Margolin, has been entrenched in researching COVID-19, how it relates to flame resistant (FR) clothing, and how we can keep our customers – those required to wear FR clothing – safe on the job. In doing this research, Scott […]

June 29, 2020

How to Get Ahead of Hurricane Season

June 26, 2020

FRC Safety During COVID-19: Do Industry Standards Incorporate FR Face Masks?

Emergent Standard Updates Present a Path to ASTM- and NFPA-compliance for Face Masks Normal life today looks a bit different than it did a few short months ago, as face masks have become an important way to curb the spread of COVID-19. Correspondingly, as utility, energy infrastructure, and other vital […]

June 24, 2020

Evaluating Your FRC Supplier During the COVID-19 Crisis – Introduction

The COVID-19 pandemic has been one of the most disruptive events in the past 100 years. A global quarantine has brought drastic changes to the way we live, shop, and interact with our world. Apart from those tragically impacted by the virus, retailers have been hit especially hard. Traditional purchasing […]

June 22, 2020

Top 3 Unintended Consequences of Choosing Uniform Rental

This is the final post in our series examining the industry’s shift away from uniform rental (“rental”) programs with industrial laundry for arc-rated and flame resistant (“AR / FR”) clothing, a closer look at misconceptions that sometimes lead companies to select rental for AR / FR clothing, and unintended consequences […]

June 18, 2020

Surprise! It’s Your Annual Rental Program Price Increase

When making any purchase, whether small or a large, you want to make the most informed financial decision. Factors to consider include service, selection, quality, and cost. If you can guarantee your expectations of these factors are consistently met, you should feel confident in your purchase. When these factors drastically […]

June 17, 2020

Service Charges: The “Dirty Laundry” of Uniform Rental

When choosing a service model for sourcing arc-rated and flame resistant (AR / FR) clothing, price often factors heavily into the decision. However, when it comes to uniform rental (“rental”), the weekly program charges quoted by suppliers do not paint a full picture of overall expense. For example, one of […]

June 15, 2020

FR Leadership in Trying Times

Since COVID-19 spread into the US, hard working men and women in essential industries have worked around the clock to keep our country’s vital infrastructure up and running. Like these workers, Tyndale’s core values reside in keeping our communities safe. In response to COVID-19, we anticipated our customer’s need for […]

June 12, 2020

What is the Impact of an Arc Flash?

For most people, going to work doesn’t involve being exposed to serious hazards. However, if you are a utility worker performing certain essential job functions, you are exposed to arc flash hazards on a regular basis. Companies are responsible for providing extensive safety training and workers are required to abide […]

June 10, 2020

TyndaleFRC Express – Advanced Features

This is the third and final post in our series highlighting the features of Tyndale’s newest service platform – TyndaleFRC Express. Don’t miss part 1 for background and to find out how to get started, and part 2 for an overview of the platform’s features. In this post, we take […]

June 8, 2020

Are AR/FR COVID-19 Face Masks Considered PPE?

At Tyndale, our priority has always been protecting America’s workers. Since COVID-19 began spreading in the US, we heard the call and moved quickly to design, manufacture, and ship arc-rated and flame resistant (AR / FR) face masks. So far, we’ve shipped close to a million AR / FR masks toward […]

June 5, 2020

How Uniform Rental Loss & Damage is Costing You Real $$$

Charges for lost and damaged garments are not typically factored into initial budget estimates for uniform rental (“rental”) programs but in reality are almost always the most significant source of unexpected program cost. In fact, rental customers report paying as much as 20-30% in added charges for loss/damage – which […]

June 3, 2020

TyndaleFRC Express – The Basics

As we learned in Part 1 of our TyndaleFRC Express blog post, choosing a managed apparel program can be challenging. In Part 2, “The Basics of TyndaleFRC Express,” learn about why TyndaleFRC Express is the best solution to meet the arc-rated and flame resistant (AR / FR) clothing needs for […]

June 1, 2020

Hidden Charges for Adding New Employees to a Uniform Rental Program

When a company welcomes a new employee who is required to wear arc-rated flame resistant (AR / FR) clothing to stay safe on the job, you would think the process to get that employee added to the clothing program is straightforward. Not so in a uniform rental with industrial laundry […]

May 29, 2020

Why is Uniform Rental Invoicing Such a Headache?

Invoicing from your uniform rental with industrial laundry (“rental”) provider seems like it should be straightforward – there’s a contract and the rental pricing is in the contract. So, why is the invoicing process one of the most frustrating things that customers have to deal with in a rental program? […]

May 26, 2020

Uniform Rental Scare Tactics – Part 2

As we learned in Part 1 of our Uniform Rental Scare Tactics blog post, the sales pitch by some uniform rental companies can be confusing or misleading. In Part 2, we expand on some common misleading statements made by these companies, all of which focus on “risks associated with home […]

May 20, 2020

Get Started with TyndaleFRC Express

OSHA’s final ruling is clear: if employees are subject to arc flash or flash fire hazards on the job, employers are responsible for outfitting them with the appropriate protective clothing. But managing that process through retail channels can be expensive and time-consuming, which is why we created TyndaleFRC Express. Are […]

May 18, 2020

What is Underwash and How is it Costing You?

When choosing an arc rated / flame resistant (AR / FR) clothing supplier, it’s important to understand your options and how they impact both your company and its employees. In this post and in the video below, we discuss what “underwash” means in a uniform rental with industrial laundry (“rental”) […]

May 15, 2020

FRC Safety During COVID-19: What Are the New COVID-19 Guidelines for Tyndale’s Retail Stores?

During the COVID-19 (“coronavirus”) pandemic, we recognize and appreciate that you are working around the clock to maintain our country’s vital infrastructure. Tyndale is proud to support you during this time with the re-opening of our Factory Store and Service Center locations in Williamsport, PA; Midland, TX; and Oklahoma City, […]

May 11, 2020

Uniform Rental Scare Tactics – Part 1

The stark difference between the ‘sales pitch’ and the reality of rental programs is an often cited reason for leaving rental programs. Scare tactics are used to suggest that home laundering is “unsafe” and/or OSHA requires or strongly prefers industrial laundry. This is simply untrue and very misleading. Watch VP […]

May 8, 2020

What Does Dual Hazard Mean?

As you are purchasing AR / FR clothing you might have seen reference to the term dual hazard. This might even lead you to the thinking that finding a garment with “dual hazard” functionality will protect you better than an arc rated or flash fire rated garment. In this FAQ […]

May 7, 2020

Protect your Bottom Line: Shortages with Uniform Rental

Shortages – when an employee doesn’t get back the garments they turned in the previous week for cleaning – are one of the most common complaints in a uniform rental program. In fact, any uniform rental account with 10+ wearers likely experiences shortages at least once a week. But what […]

May 4, 2020

FRC Safety During COVID-19: Wondering if FR Masks Contribute to Heat Stress?

As the weather warms up, do you have concerns about face masks becoming sweaty and uncomfortable? the Centers for Disease Control and Prevention (CDC) recommends wearing face masks, and in many states, they are required. Tyndale continues to cover flame resistant clothing (FRC) safety during COVID-19, and in our most recent video, […]

May 1, 2020

What’s the Difference Between Uniform Rental and Managed Direct Purchase?

When choosing an arc rated / flame resistant (AR / FR) clothing supplier, it’s important to understand your options and how they impact the wearers of the clothing. In this post and in the video below, we discuss differences between the two main AR / FR supplier options – uniform […]

April 29, 2020

Top FRC Industry Resources for COVID-19

In addition to our comprehensive blog series and resources dedicated to FRC Safety During COVID-19, we’re providing resource information about the ongoing Coronavirus pandemic. The information includes links from a wide variety of resources offering guidance related to the flame resistant clothing industry. We hope that you find this information […]

April 24, 2020

FRC Safety During COVID-19: Avoiding Fogged Lenses While Wearing a Facemask

It’s no secret that due to COVID-19 our “new normal” requires everyone, especially essential workers, to wear face masks in public and on the job. When on the job, while wearing a face mask and safety glasses or a face shield, your breath may fog the surface of your safety […]

April 22, 2020

FRC Safety During COVID-19: Why Sharing FRC and PPE is Risky – Part 2

As stated in our previous post, Why Sharing FRC and PPE is Risky, COVID-19 is spread by primarily by respiratory droplets; when an infected person coughs or sneezes, the droplets are transmitted to hard surfaces and fabrics, where they can remain viable for days. For this reason, it is important […]

April 20, 2020

FRC Safety During COVID-19: How to Disinfect Arc Flash Kit PPE

During the COVID-19 (“coronavirus”) pandemic, people in many vital industries are working around the clock to maintain our country’s critical infrastructure and the flow of essential products. In challenging times such as these, it’s more important than ever to stay calm and work smarter. It’s also vitally important to double-down […]

April 17, 2020

FRC Safety During COVID-19: Are AR/FR Masks Safe to Breathe Through?

Recently at Tyndale, we’ve adjusted our manufacturing efforts in response to the high demand for protective flame resistant (FR) surgical-style face masks. Tyndale understands the urgency for FR masks during these trying times. By adjusting shifts to six and seven days a week, adding new manufacturing facilities, and seeking additional […]

April 15, 2020

FRC Safety During COVID-19: Tyndale 360 Events

Because COVID-19 can live for several hours on porous surfaces like clothing and up to several days on non-porous surfaces – like face shields, voltage-rated rubber gloves, and hard hats – it’s important to avoid sharing PPE during this time unless there is an absolute necessity. So what should you […]

April 13, 2020

FRC Safety During COVID-19: Protecting Your Safety in our Warehouse

As utility workers and others in vital industries are working harder than ever to keep our country going through the COVID-19 pandemic, we at Tyndale stand more dedicated than ever to ensuring you have the products you need to stay safe on the job.

April 10, 2020

DIY FR Face Masks: Sew and No-Sew

As the coronavirus pandemic continues to spread, the Centers for Disease Control and Prevention (CDC) is now recommending Americans wear cloth masks in public. And, essential business employees should be wearing a mask while on the jobsite. If you don’t have a FR mask or are waiting on delivery of […]

April 9, 2020

FRC Safety During COVID-19: How to Safely Handle a Tyndale Shipment

As you may know, the COVID-19 virus is capable of remaining active, or viable, on surfaces like cardboard for up to 24 hours and on surfaces like plastic for up to 3 days. Since the vast majority of shipments from Tyndale are delivered to you in a plastic bag or […]

April 8, 2020

FRC Safety During COVID-19: FR Mask Care and Use

In response to COVID-19 and in an effort to help keep our customers safe, Tyndale has diverted a significant portion of our American manufacturing capacity to making FR surgical-style masks. In addition, we are sourcing masks from our key FR suppliers. The masks are made with flame resistant and arc […]

April 6, 2020

FRC Safety During COVID-19: How Soap Destroys COVID-19

Disinfecting arc rated and flame resistant (AR / FR) clothing and PPE begins and ends with soap and water – The Centers for Disease Control and Prevention (CDC) recommended method for disinfecting from COVID-19. When we think of the word “disinfecting” we typically think of popular products such as Clorox, […]

April 3, 2020

FRC Safety During COVID-19: What to Know When Using Alcohol as a Sanitizer

In these uncertain times, you can rely on Tyndale to provide the latest information on arc rated (AR) / flame resistant (FR) clothing safety during COVID-19. In the post and video below, we talk about what you should know when using alcohol as a sanitizer – and what you should do […]

April 2, 2020

FRC Safety and COVID-19: Our Appreciation to America’s Workers

On behalf of Tyndale and its employee members, Tyndale’s President Robert Whittenberger would like to personally thank the thousands of utility workers and others in vital industries who have demonstrated unwavering dedication in maintaining our country’s critical energy infrastructure as we face this unprecedented challenge of COVID-19 – both as […]

April 1, 2020

FRC Safety During COVID-19: Disinfecting Leather Gloves

During the COVID-19 (“Coronavirus”) pandemic we have been told to wash our hands frequently to stop the spread of this deadly virus. But, how should you disinfect the leather gloves that you use on the job?

March 31, 2020

FRC Safety During COVID-19: Dangers of Cheap FRC

You’ve heard the saying, “you get what you pay for,” right? Well, FR clothing is no exception. In fact, buying cheap AR / FR clothing can have the worst consequence of all – it can be deadly. In this post – and in our video featuring Scott Margolin, Tyndale’s VP […]

March 30, 2020

FRC Safety During COVID-19: Impact of Residual Bleach Spray on Flame Resistance

In these uncertain times, you can rely on Tyndale to provide the latest information on arc rated (AR) / flame resistant (FR) clothing safety during COVID-19. In the post and video below, we talk about the potential impact of residual bleach spray on flame resistance. For additional information on AR / […]

March 26, 2020

FRC Safety During COVID-19: Why Sharing FRC and PPE is Risky

Don’t share your arc rated and flame resistant clothing (AR / FR Clothing) – sounds like a given, right? However, as the current health crisis continues to unfold, we want to be sure we are reminding wearers why not sharing clothing is more important than ever. We’ve explained that COVID-19 […]

March 25, 2020

FRC Safety During COVID-19: Dried Bleach Residue and FRC

Along with the pandemic has come increased emphasis on reducing possible virus exposure by disinfecting work equipment, personal items, and commonly-touched surfaces. Chlorine bleach is a powerful, widely available, and cost-effective disinfectant that is being widely used to disinfect in line with CDC and WHO recommendations.

March 23, 2020

Are Uniform Rental Programs Cost-Effective?

This is the third post in our series examining the industry’s shift away from uniform rental (“rental”) programs with industrial laundry for arc-rated and flame resistant (AR / FR) clothing, a closer look at misconceptions that sometimes lead companies to select rental for AR / FR clothing, and unintended consequences […]

March 23, 2020

FRC Safety During COVID-19: Disinfecting FRC

Whether you are exposed to someone with the flu or more seriously, someone with COVID-19, how to wash your flame resistant clothing (FRC) remains the same. This blog post highlights the do’s-and-don’ts for disinfecting your FRC after a day in the field or coming in contact with the COVID-19 virus. […]

March 17, 2020

Is Uniform Rental with Industrial Laundry Necessary for AR / FR Clothing?

This is the second post in our series examining the industry’s shift away from uniform rental (“rental”) programs with industrial laundry for arc-rated and flame resistant (AR / FR) clothing, a closer look at misconceptions that sometimes lead companies to select rental for AR / FR clothing, and unintended consequences […]

March 13, 2020

Should I Wear FR Outerwear Over FR Clothing?

Yes! We published a blog post on what to wear under your flame resistant (FR) clothing, and today, we’re sharing what you should be wearing over your FR clothing. The answer: FR outerwear. During the cooler months, it’s important to wear outerwear to protect yourself from the elements and avoid […]

March 10, 2020

Four Reasons Why FR Managed Programs Are Better Than Uniform Rental Programs

Managed apparel programs provide many benefits to businesses and employees alike. Many AR / FR clothing (arc rated / flame resistant clothing) wearers enjoy the convenience, choice, and ease of use of a managed program, where garments are chosen by the wearer from a catalog of options approved by management, […]

March 5, 2020

How Well Does an Arc Rated Garment Perform After 100 Washes?

We are frequently asked about the durability of flame resistance of arc rated garments. Do my arc rated garments lose their protective ability as I wash them after each use? All FR and AR garments sold by Tyndale are guaranteed flame resistant for the service life of the garment. To […]

February 27, 2020

Does My AR/FR Rainwear Meet The Right Standard?

Note: We cover this topic in a more recent post: Which Standards Should My AR / FR Rainwear Pass? Shopping for arc-rated and flame resistant (AR/FR) rainwear? Take a VERY close look at the label. Some rainwear sold on the market as flame resistant is tested and labeled to comply […]

February 24, 2020

The Hierarchy of FR Clothing Standards

There are a lot of FRC safety standards out there. Understanding how they work together to inform those who are required to be in compliance with them is important. In this post – and the brief video below – we break down the hierarchy of these safety standards, starting with […]

February 20, 2020

How Well Does Tyndale’s Versa Line Perform During An Arc Flash?

Tyndale recently debuted our new clothing line, The Versa Collection. This line of Tyndale-made FRC focuses on comfort and style while delivering the safety and performance you expect to keep you safe on the job. Curious to know how this contemporary line of FR clothing fared during a real-word arc […]

February 17, 2020

Outfitting Your Workers With The Right Safety Gloves Is All In Your Hands

Tyndale often supplies protective gloves to its managed program customers. Tyndale offers a fully managed glove program to support internal tracking of employee protective glove purchases and avoid over spending. To ensure a wide variety of cut resistant, arc rated, and fire resistant gloves for your company’s specific on-the-job hazards, […]

February 13, 2020

What Should I Wear Under My FRC?

This is a question we get fairly often, and for good reason: it’s not uncommon to wear an undershirt off the clock, for added comfort or warmth. How does this common practice apply in an energized work environment? What do the standards say, and how do the remaining options rate […]

February 11, 2020

Customer Spotlight: NorthWestern Energy

“Before choosing Tyndale, we had a local vendor that we worked with and inventory became an issue.” – Barry O’Leary, Director of Safety at Northwestern Energy. Northwestern Energy previously was supplied through a hybrid clothing program, where they would rely on local Flame Resistant clothing (FRC) vendors to dress larger […]

February 7, 2020

What Does Arc Flash Testing Look Like? An Introduction to Tyndale’s Newest Video Series

We believe seeing is believing. That’s why we continually invest in real world demonstrations to visualize why wearing arc-rated flame resistant clothing – and wearing it properly – matters. As part of this commitment, we are pleased to share our latest Arc Flash Video Series. These test videos display the […]

January 31, 2020

Bundling Up? Buckle Down on Safety

For much of the country, winter ushers in additional hazards to manage – challenges like cold temperatures, shorter periods of sunlight, and freezing precipitation. To stay safe in weather like snow and ice, we must adapt our safety behaviors – taking steps like leaving extra time to clear off our […]

January 28, 2020

What Should I Look For On FR Clothing Labels?

Reading labels on flame resistant (FR) clothing can be confusing. How do you know for sure that the clothing you have offers the protection you need? FR clothing is required to have specific information on its label in order to comply with industry safety standards. In this post, we share […]

January 20, 2020

Tyndale’s Top 10 Blog Posts of 2019

Happy New Year, and welcome to 2020! Our members here at Tyndale hope your year is filled with joy and prosperity. Join us as we recap our most popular blogs from 2019, detailing innovation and education in the world of FRC.

January 16, 2020

OSHA’s Top 10 Safety Violations for 2019

A new year is the perfect time to pause and reflect on how we’re doing and how we can do better. How adept are we as a nation in complying with the basic rules of workplace safety? Where can we focus our efforts to improve? As 2020 gets underway, looking […]

January 6, 2020

The Truth About FR Headwear

With the winter months upon us, proper outwear is key to staying both warm and safe on the job. FR pants, shirts, and outerwear are a must, but do you know if you should be wearing FR headwear? Let us help explain that answer. As the mornings gets colder, it […]

December 16, 2019

Customer Spotlight: Duke Energy

Since developing and establishing Managed Apparel Programs as the industry benchmark over 35 years ago, Tyndale is the trusted supplier of goods and services for hundreds of companies across the US — including over 80% of all publicly owned electric utilities and over 20 Fortune 500 companies. Pair that with our 98% […]

December 12, 2019

What is Cold Stress?

Cold winter weather can be downright dangerous, and it is important to know the risks to workers and how to stay protected from harsh winters. According to the National Weather Service, 30% of injuries during winter storms are a result of being unprepared with adequate clothing. Depending on where you’re […]

December 9, 2019

NSA Adds Women’s Clothing Brand, HauteWork®, To Its House of Brands

USA manufacturing, family-owned values, and commitment to innovation is what drew Jaime Glas, CEO and founder of the upscale women’s brand of Flame Resistant Clothing (FRC), HauteWork®, to National Safety Apparel® (NSA) as a partner. “It was an immediate fit,” said Glas of her first meeting with NSA in early […]

December 5, 2019

What is ANSI 107?

This blog post, originally published in 2019, was updated in 2024. When selecting high-visibility safety apparel (HVSA) such as shirts, rainwear, outerwear, safety vests, headwear, and other high-visibility accessories, ANSI/ISEA 107, American National Standard for High-Visibility Safety Apparel, provides reliable guidelines for proper selection and use. The standard was created […]

November 12, 2019

Tyndale Returns to KEMA for More Live Arc Flash Testing

Nothing drives home the importance of wearing arc rated, fire resistant (AR/FR) clothing on the job than seeing what happens when non-FR clothing is subjected to an actual arc flash. Back in 2017, Tyndale broke new ground by hosting, along with Westex, an utterly unique event at the KEMA – […]

Protective Boots

By Wearer Count:

A Solution for Every Company Size

Industries

Hazards

Technical

Videos

Industry Insights

Customer Support

Watch Tyndale, Ariat & PBR Stars

Visit a Store

Get Started

Careers With Tyndale

Protective Boots

By Wearer Count:

A Solution for Every Company Size

Industries

Hazards

Technical

Videos

Industry Insights

Customer Support

Watch Tyndale, Ariat & PBR Stars

Visit a Store

Get Started

Careers With Tyndale

Protective Boots

By Wearer Count:

A Solution for Every Company Size

Industries

Hazards

Technical

Videos

Industry Insights

Customer Support

Watch Tyndale, Ariat & PBR Stars

Visit a Store

Get Started

Careers With Tyndale

Protective Boots

By Wearer Count:

A Solution for Every Company Size

Industries

Hazards

Technical

Videos

Industry Insights

Customer Support

Watch Tyndale, Ariat & PBR Stars

Visit a Store

Get Started

Careers With Tyndale