May 29, 2026
Inclement weather creates additional hazards for workers, making even routine jobs more dangerous. It’s critical to understand the risks and why the proper ASTM certification for rainwear is required.
October 10, 2025
When performing high-risk electrical work, it’s critical that your personal protective equipment (PPE) exceeds the potential incident energy of an arc flash associated with that task. For work that requires a category (CAT) 2 level of protection—defined by NFPA 70E as a calorie rating of 8–24 cal/cm²—layering arc-rated and flame […]
March 6, 2025
If you’re doing any kind of electrical work, you may be exposed to arc flash hazards. Even environments typically considered “low risk,” like opening an energized breaker panel, can pose the threat of an arc flash incident and cause life-threatening harm. That’s why OSHA’s latest Arc Flash Guidance, released in […]
February 28, 2025
In November 2024, the Occupational Safety and Health Administration (OSHA) issued new arc flash guidance for the first time in over 20 years. This updated guidance was published in response to stalled progress in reducing electrical injuries, persistent misconceptions about low-voltage work, and gaps in PPE compliance that continue to […]
December 20, 2024
OSHA recently released its new arc flash guidance in 20 years, aiming to reduce preventable arc flash injuries amongst commercial, industrial, and residential electricians – with major implications for “de-energized” and low voltage work. Scott Margolin, Tyndale’s Vice President of Technical and Chairman of the Board of the Partnership for […]
November 25, 2024
Breaking news: OSHA has just released new guidance on arc flash safety – for the first time in almost 20 years. Recognizing the continued prevalence of preventable arc flash injuries and fatalities despite longstanding safety standards and proven PPE the guidance is designed to better protect commercial, industrial, and residential […]
October 18, 2024
Working in or around an electrical environment means understanding the critical importance of wearing arc-rated and flame resistant (AR / FR) clothing. But safety doesn’t stop there – comprehensive training is just as essential. That’s why we’re excited to introduce to you a 6-Hour NFPA 70E Electrical Safety Training brought […]
October 11, 2024
NFPA 70E Standard for Electrical Safety in the Workplace is the primary standard for commercial and industrial electricians in the United States today, and we’re often asked what it says about protecting workers. Though the answer is more comprehensive and detailed than can be digested in one sitting, its core […]
October 4, 2024
It may be surprising, but compliance and protection aren’t always synonymous – especially when it comes to arc-rated and flame resistant (AR/FR) garments. Put simply, compliance refers to what we must do to meet regulatory requirements, such as OSHA guidelines or what is outlined within standards like NFPA 70E or […]
August 22, 2024
The top two causes of arc flash injury and fatality in the US share a commonality: the victims weren’t wearing any PPE at all. Correct misconceptions, combat complacency, and challenge the status quo to strike these causes from the list: Please be aware: this video contains graphic content and may […]
August 21, 2024
Imagine: you’re on a job, facing a deadline, and your PPE isn’t handy. This isn’t just a hypothetical, it’s the #3 cause of arc flash injury and fatality in the US. Here’s why this scenario is common with task-based PPE: Please be aware: this video contains graphic content and may […]
August 20, 2024
The vast majority of negative arc flash outcomes are attributable to four main causes – allowing us to chart a course to a safer future. Our host Scott Margolin reveals the #4 leading cause to curtail at your company: Please be aware: this video contains graphic content and may not […]
July 23, 2024
OSHA recently confirmed it’s actively working to close a gap in arc flash protection for up to 750,000 commercial and industrial electricians who are not currently given the PPE they need to stay safe on the job – counter to recognized industry standards. In fact, the Assistant Secretary for Occupational […]
May 31, 2024
NFPA 70E is a vital standard for establishing practical and safe workplaces in order to avoid electrical hazards. Within NFPA 70E, the phrase “adequately rated meter” pops up frequently. The term “adequately rated” is often misunderstood throughout industries that follow NFPA 70E and use electrical testing meters. Read on to […]
May 17, 2024
When it comes to electrical safety, understanding and adhering to strict guidelines is paramount to protecting yourself from potential hazards. When working near energized electrical components, it’s crucial to know what is and isn’t permissible within the protection boundaries set forth by standards such as NFPA 70E, Standard for Electrical […]
February 13, 2024
Moving into 2024, Tyndale is celebrating the best of the best with our Top Performer products! We want you to have the best shopping experience possible – that’s why we’ve created the Top Performer tag, which makes it easy to shop for the most popular products we have to offer. […]
February 8, 2024
Do you know the ins and outs of NFPA 70E? Intimidated, or not sure where to begin? Start here! Whether you’re a beginner or you have ample field experience, our new video-based training series NFPA 70E Made Easy is for you. This “crash course” delves into the intricacies of NFPA […]
January 16, 2024
Years ago, remembers William Watson – Vice President of Safety at Miller Electric and Chairman of the NECA Large Contractor Safety Group, NFPA 70E required electricians to send copies of paperwork for completed energized work to their employers for retention. In those days, William often observed inaccuracies in the paperwork […]
October 27, 2023
In the evolving landscape of workplace safety, staying up to date with industry standards is crucial. The National Fire Protection Association’s (NFPA) NFPA 70E standard is a critical reference for those who specify or wear arc-rated and flame resistant (AR / FR) clothing and related personal protective equipment (PPE). This […]
September 12, 2023
We are pleased to welcome Jason Brozen to Tyndale as Lead Corporate Safety and Technical Trainer. Jason brings to Tyndale a 28-year career as a Master Electrician. He is a CESCP and has extensive experience in the NFPA 70, 70E, and 70B. Jason has made it his mission to educate […]
August 23, 2023
“It’s pretty low risk since I’m smarter than this hazard.” That’s what Jason – like many experienced electricians – had come to believe about energized work. As a master electrician for over 14 years, Jason was installing a breaker in a 2,500-amp piece of gear at a hotel when he […]
June 7, 2023
Many people think that 100% cotton is okay to wear when there’s an arc hazard because it doesn’t melt. But is that true? Can a DC arc flash ignite flammable 100% cotton workwear, and does it require any more or less energy than an AC arc to do so? Plug […]
May 9, 2023
Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. Tyndale’s Rise of Electrification series highlights the growing demand for electricians in the United States. In parts one and two, we discussed the significance of this trend and its implications for […]
May 5, 2023
Summer is right around the corner! And while we typically enjoy many fun summertime activities, such as going to the beach, hiking, and camping, the season also presents some safety issues. Stormy weather, heat-related illnesses, skin damage from the sun’s UV rays, and bug bites require extra precautions, which are […]
May 3, 2023
In the first episode of Tyndale’s Rise of Electrification blog mini-series, we covered how the increased adoption of electrification is having a positive impact on the job market for electricians. The recent passing of the Infrastructure Investment and Jobs Act is a momentous step towards a sustainable future for the […]
April 6, 2023
Did you hear the news? NFPA 70B, Standard for Electrical Equipment Maintenance, was recently upgraded from a guide – that is a recommended practice indicating what you should do – to a standard, making it a requirement indicating what you shall do. In our last post we took a look […]
March 31, 2023
Last week we shared that NFPA 70B, Standard for Electrical Equipment Maintenance, was recently upgraded from a guide – that is a recommended practice indicating what you should do, to a standard – making it a requirement indicating what you shall do. As a result, there is a strong likelihood […]
March 24, 2023
You’ve heard of NFPA 70, the National Electric Code – the benchmark for safe electrical design, installation, and inspection to protect people and property from electrical hazards. This standard guides non-utility electrical work, setting the rules for commercial and industrial electricians. However, it doesn’t focus on safe work practices or […]
January 6, 2023
At Tyndale, arc-rated and flame resistant (AR / FR) clothing is our core competency, enabling us to leverage our expertise and 40+ years of experience to provide valuable educational resources to protect workers. Our industry-leading blog and videos provide in-depth educational content to answer technical questions and address common safety […]
December 2, 2022
To better understand arc ratings – what they are and the difference between the two ways they are measured – we define them below and link back to Tyndale’s Arc Week Season 3, which covers the science behind all things arc flash. What is an Arc Rating? Simply put, an […]
November 11, 2022
OSHA’s preliminary list of the Top 10 Safety Violations for 2022 has been announced, and lockout/tagout made the list again. With 1,977 violations cited related to OSHA 1910.147 – the control of hazardous energy (lockout/tagout) – noncompliance with this standard comes in sixth place on the list of most frequently […]
September 2, 2022
If you’ve ever said the words, “we don’t work energized”, or heard those words, this episode is a must watch. To shoot down the myth of de-energized work, tune in to hear from four industry experts as they explain why, for commercial and industrial electricians and electrical workers in other […]
August 29, 2022
Arcs are clearly dangerous, but the question is, how dangerous? How do we determine how big a given arc, at a given set of energies, out of a given piece of equipment will be? What is arc incident energy? Arc incident energy is the potential magnitude of an arc flash. […]
August 24, 2022
It’s that time of year again, Arc Week Season 3 is here and filled with content you won’t want to miss, plus references to a movie some might consider Tom Cruise’s best work. As we dive into the danger zone, Scott Margolin, your Arc Week Host and Tyndale’s VP of […]
August 17, 2022
If you’ve been following along in our Proud to Protect Canada series, you’ve heard our resident experts talk through some fundamental topics like – why wear arc-rated and flame resistant (AR/FR) clothing, what are arc flash hazards and related standards, what are flash fire hazards and related standards, and how […]
August 5, 2022
WORKWEAR DESIGNED BY WOMEN FOR WOMEN At Tyndale, we recognize that women are a vital part of today’s workforce, and – in line with our mission to provide an enjoyable uniform experience – we are excited to introduce a new brand of women’s arc-rated flame resistant (AR / FR) apparel, […]
August 3, 2022
In previous episodes of our Proud to Protect Canada series, we reviewed the safety standards governing PPE and protective clothing related to arc flash and flash fire hazards. In Episode 3, we learned that CSA Z462, the Canadian standard governing arc flash protection, is very similar to its US counterpart, […]
March 15, 2022
In Episode 2 of our Proud to Protect Canada series, Tyndale’s Canada Sales Director, Paul Castelli, and VP of Technical, Scott Margolin, answer the question, what is an arc flash. Beyond the definition, they discussed what causes an arc flash, the dangers associated with an arc flash, and how to […]
March 11, 2022
In previous posts, we explained the National Electric Code (NEC) and the National Electric Safety Code (NESC). Today, we’re focusing on NFPA 70E and how it relates to those codes. There’s even an easy-to-read comparison chart so you can see the differences at a glance. We’ll start with a high-level […]
March 3, 2022
It’s common for safety codes and standards to be confused or misunderstood. The acronyms can look similar, and you might wonder how they differ or relate. In today’s post, we explain the National Electric Safety Code (NESC) – not to be confused with the National Electric Code (NEC), which we […]
March 1, 2022
As Tyndale extends our managed arc-rated and flame resistant (AR / FR) clothing programs into Canada, we invite you to follow along in our Proud to Protect Canada series. While many of the topics in this series contain Canadian-specific content, there are some topics that are relevant on both sides […]
February 25, 2022
There are a lot of safety standard acronyms out there and they can often be confused or misunderstood. In this post, we’re focusing on the National Electric Code (NEC). In future posts, we cover the National Electric Safety Code (NESC) and how the NEC and NESC relate to NFPA 70E. […]
February 18, 2022
Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. More than 500,000 of Americans working on or near energized industrial electrical equipment today do not have protection from the deadly arc flash hazard, despite safety standards that have been […]
January 18, 2022
As you know, the ongoing pandemic has impacted every single area of life. As a result, it is no surprise that the past two years have been relatively quiet in terms of major changes to safety standards with impact to arc-rated and flame resistant (AR / FR) clothing requirements. Tyndale […]
November 5, 2021
If the PPE you wear each day includes protective footwear, you’ve probably noticed the ASTM F2413 label in one of your safety shoes or work boots. ASTM F2413 defines minimum performance requirements for footwear to protect against various workplace hazards. Updates were made to this standard in 2018, resulting in […]
September 28, 2021
Join our host, Scott Margolin, as he uncovers the consequences of failing to fully button your arc-rated or flame resistant (AR/FR) shirt. Improperly wearing your AR / FR clothing could be the difference between injury or leaving the jobsite safely if exposed to an arc flash or flash fire hazard. […]
September 24, 2021
Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. An arc flash can reach temperatures four times hotter than the surface of the sun, but we can avoid virtually all fatal and catastrophic arc flash injuries with arc-rated and flame […]
September 21, 2021
The common theme in our Dangers of Improper Wear series is ensuring that the garments you put on each day are worn properly and provide adequate protection against the hazards you face at work. Whether you’re faced with potential flash fire or arc flash hazards, wearing protective gear properly could […]
September 14, 2021
Dress Confidently for Arc-flash Hazards with ASTM F1891-Rated Protective Rainwear Before you invest in arc-rated or flame resistant (AR / FR) rainwear it is important you’re aware of the standard that the garment passes to allow it to make its FR claim. Specifically, rainwear tested to ASTM D6413, the “Vertical […]
September 7, 2021
In today’s episode, we’re looking at the consequences of wearing flammable outerwear over AR garments. In this case, a flammable high-visibility vest and jacket over CAT 2 arc-rated (AR) dailywear. The video below graphically shows the consequences of wearing flammable clothing over quality AR clothing. So, be sure to watch […]
September 3, 2021
We’re so excited to celebrate Tyndale 500! Not quite the famous, 500-mile racecar event you may be familiar with. We recently reached (and quickly exceeded) 500 posts on HERE, our industry-leading blog! All thanks to you – our readers – for cheering us on! Unlike Daytona, we’re not stopping at […]
August 31, 2021
Are You Required to Tuck-in Your AR / FR Shirt? The answer is YES, you should always tuck-in your arc-rated and flame resistant (AR / FR) shirts. We’ll show you why it’s so important in this week’s episode from our Dangers of Improper Wear series. Watch the video below for […]
August 27, 2021
In this episode, our host Scott Margolin, Vice President of Technical, is on location in Jupiter, Florida, where he’s joined by arc flash experts Hugh Hoagland of ArcWear and Kinectrics, Rich Gojdics of Enespro PPE, and Jason Iannelli of the Electrical Training Alliance (ETA) and International Brotherhood of Electrical Workers […]
August 26, 2021
In this episode, Special guest Duane Siders, Chief Revenue Officer at National Safety Apparel (NSA), joins Tyndale’s Scott Margolin to look back at some of the most famous arcs in history – and how far we’ve come. But not before we look back at some of the most famous sharks […]
August 25, 2021
So far, we’ve taken a look at PPE for CAT 1 & 2 tasks and layering for hazards above CAT 2 (from 8-20 cal/cm2). Today, our host Scott Margolin is joined by special guest Rich Gojdics, Vice President of Business Development at Enespro PPE, to answer frequently-asked questions about PPE […]
August 24, 2021
In both shark diving and industrial electrical work, risks exist on a scale. As we learned in Episode 1, when we recognize a greater hazard, we must increase our personal protective equipment (PPE) – including our arc-rated (AR) clothing system and other PPE – accordingly. For hazards above CAT 2 […]
August 23, 2021
Today, we’re taking a deep dive on personal protective equipment (PPE): Do I need it? When? What PPE do I need, and how do I match it to the hazard? Believe it or not, swimming with sharks can tell us a lot about PPE for working with arcs and how […]
August 17, 2021
As part of our Improper Wear series, we’re looking at meltable base layers – which includes non-FR under shirts and anything else you might wear under your arc rated and flame resistant (AR / FR) shirt(s), such as a bra. The manikin shown in the video below is wearing a […]
August 13, 2021
Thanks to everyone who submitted questions to be answered in our FR FAQ series. The question we’re answering today was submitted by Derek S. from Arizona. It is: Do I need to tuck in my arc-rated / flame resistant (AR / FR) clothing while wearing an AR / FR base […]
August 10, 2021
Streetwear base layers are usually constructed from popular, man-made fabrics such as nylon, polypropylene, or spandex. When wearing these fabrics underneath arc-rated and flame resistant (AR / FR) clothing, you are at risk of serious injury, and we’re going to tell – and show –you why. When exposed to the […]
August 3, 2021
Welcome to episode #1 of our Dangers of Improper Wear blog and video series! Let’s join our guide, Tyndale’s Vice President of Technical, Scott Margolin as he explains today’s improper wear topic: Insect Repellents. We focus on the differences between two insect repellents – and discover the impact each has on […]
July 27, 2021
Mistakes happen. But mistakes made when it comes to how you wear your arc-rated and flame resistant (AR / FR) clothing can mean the difference between walking away from an accident and being seriously injured – or worse – in such an event. Follow our Dangers of Improper Wear series […]
July 23, 2021
Tyndale is known for being a leading provider of arc-rated and flame resistant (AR / FR) clothing. Did you know we also perform live arc flash testing to ensure the FR garments we sell perform as expected under real-world conditions? In today’s FR FAQ, we explore why and how Tyndale […]
June 15, 2021
Before they’re offered for sale in the marketplace, arc-rated (AR) garments and Personal Protective Equipment (PPE) are tested individually to assess their performance and ensure they deliver the arc flash protection that’s needed to keep workers exposed to arc flash safe. But, if you’re involved in specifying and purchasing that […]
June 8, 2021
If you work alongside the arc flash hazard, chances are you’re used to wearing a balaclava and face shield – particularly when you’re completing PPE category (CAT) 1 and CAT 2 work. Have you ever wondered how these items are tested, or what standard ensures these items – as well […]
June 4, 2021
Update: new OSHA guidance to close this gap in arc flash protection is pending. See the latest update here. If you didn’t know, June is National Safety Month. As we discuss all things safety this month, we’ve decided to take a moment to focus on a new player in the […]
June 1, 2021
May was National Electrical Safety month and today marks the beginning of National Safety Council’s Safety Month, but at Tyndale protecting workers from arc flash is at the heart of what we do every moment of every day. Beyond providing lifesaving arc-rated (AR) clothing and PPE to thousands of electricians, […]
May 28, 2021
As both a manufacturer and distributor, Tyndale prides itself on offering the best product choice in the industry, which supports compliance and satisfaction through our unique arc rated and flame resistant (AR / FR) clothing programs. In order to continue offering extensive choice, we are proud to partner with leading […]
May 25, 2021
Joining us again for this episode of How It’s Tested is Heath Hunter, Director of Industrial Sales at Ariat. Heath brings his protective footwear expertise to our discussion on electrical hazard (EH) rated boots. In part 1 of our How It’s Tested series on protective footwear we touched on impact […]
March 26, 2021
Questioning whether or not your non-flame resistant (non-FR base layer counts towards a system arc rating? This blog post gives you the answer and helps you determine the proper garments to wear as a base layer when calculating a layered arc rating. The answer is no – a non-FR base […]
February 23, 2021
As we learned in previous How It’s Tested episodes, ASTM F1506 establishes minimum performance requirements for flame resistance, arc rating, and mechanical durability, using two main tests and a series of smaller test to identify fabrics that comply. In this post, we’re concentrating on one of the two main tests […]
February 19, 2021
If you’re required to wear arc-rated or flame resistant (AR / FR) clothing, the first step in protecting yourself is making sure you’re wearing the clothing properly. It’s important to note that aside from risking your safety by not wearing AR / FR correctly, you are also out of compliance […]
February 2, 2021
One of the main standards for arc flash-protective clothing is ASTM F1506, Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs. But don’t be distracted by its long formal name. Known more commonly as “the Arc Standard” or […]
January 12, 2021
There are many AR/FR standards, each directing key guidelines for safety. Understanding how they work together to inform and support employee safety is important. Collectively, the testing standards as a whole resemble a pyramid, starting at the top with standards from OSHA. Join us as we break down the hierarchy […]
January 8, 2021
You trust your arc-rated and flame resistant (AR / FR) clothing with your life, and for good reason: AR / FR from qualified suppliers like Tyndale undergoes rigorous testing to ensure it will perform as expected in the event of an arc flash or flash fire. But what are the […]
October 27, 2020
Welcome to Episode 4 of SHOCKtober – a month-long series focusing on electric shock hazards. In this final episode, we are joined by a very special guest in the spirit of Halloween. Let’s see what one of Hollywood’s top experts on electricity and Tyndale’s VP of Technical, Scott Margolin, have […]
October 20, 2020
Welcome to Episode 3 of SHOCKtober – a month-long series focusing on electric shock hazards. Voltage-rated gloves are a vital component of any shock protection program. For this episode, we are joined by a very special guest and Subject Matter Expert (SME), Rich Gojdics, Vice President of Business Development at […]
October 6, 2020
All month long, Tyndale is taking a slight detour from our normal coverage of arc flash hazards to talk about the other electrical hazard – electric shock. This is the first in our four-part SHOCKtober series. As stated in our previous post, electric shock causes hundreds of fatalities and thousands […]
October 2, 2020
Welcome to SHOCKtober! All month long, Tyndale is taking a brief but important detour from our normal coverage of arc flash and flash fire hazards and focusing on electrical shock hazards. This is the introduction to our four-part series, which covers: Unmasking the Standards: What OSHA and 70E Say About […]
September 22, 2020
Since our founding more than 30 years ago, Tyndale has been dedicated to ensuring the men and women working to power our country have the comfortable, quality arc-rated and flame resistant (AR / FR) clothing they need to return home safely each night. Time and time again, we have seen […]
September 11, 2020
From “breaking news” to “coming soon,” Tyndale shares the latest updates (and expected updates) to main industry standards related to arc rated flame resistant (AR / FR) apparel. Watch our video below, featuring Tyndale’s Vice President of Technical, Scott Margolin, or read on to learn more. Updates to NFPA 2112, […]
August 21, 2020
The NOAA’s Climate Prediction Center has forecasted another above-normal Atlantic hurricane season in 2021, after increasing the number of storms considered “average” in the Atlantic basin, with a possible return of La Nina later in the 2021 season. COVID-19 continues to play a role in the global supply chain this […]
August 14, 2020
Though Arc Week is meant to be interesting and unique, arc flash incidents are deadly serious and the real world implications of “swimming in dangerous waters” without the right PPE are severe. So far our series has focused on “arc bites” on manikins in the lab, but arcs happen to […]
August 13, 2020
Sharks are miraculous hunters, but they’re nowhere near as dangerous to humans as TV and movies would have you believe. The fact is, electric arcs injure more people each year in the United States than sharks do – and usually more severely. Interestingly, almost none of the shark attack injuries […]
August 12, 2020
In his free time, Vice President of Technical Scott Margolin has spent 30 years diving with some of the world’s most dangerous sharks. But even after all of those successful encounters, Scott would never enter the waters without taking all relevant safety measures and working with the best dive guides […]
August 11, 2020
When planning to dive with sharks, the size, species, and number of sharks – as well as the possible dive conditions – determine the type and amount of PPE you’ll need to wear. The higher the risk of the dive, the more PPE you need to wear. The same is […]
August 10, 2020
Just as you wouldn’t swim with Great Whites without a shark cage, you don’t want to be caught THIS close to an arc without the right PPE. But you don’t have to simply take our word for it – sometimes seeing is believing. The arc rating standard is an excellent […]
August 4, 2020
What do sharks and electric arcs have in common? Join us to find out! This summer, the tides have washed in unprecedented world events and stressors that have been felt by one and all. Tyndale presents Arc Week: a week-long educational look at the world of arc flash hazards through […]
July 13, 2020
This is the final post in a three-part series examining the 2020 hurricane season and the importance of protecting workers with the right AR / FR rainwear promptly – particularly as COVID-19 has impacted supply levels. Review the season projections in our first post, and explore quality products and service […]
July 8, 2020
Because of COVID-19 and the ensuing economic losses, businesses have endured changes to how they operate, how they manage their workforce, and have needed to re-evaluate budgets and revenue streams which drastically changed over only a few short months. Financial stability is a key issue facing FRC providers, so how […]
July 6, 2020
This is the second post in a three-part series examining the importance of protecting workers with the right AR / FR rainwear during the 2020 hurricane season particularly as COVID-19 has impacted supply levels. Review the season projections in our first post, and look out for our next post to […]
June 29, 2020
The NOAA’s Climate Prediction Center has forecasted another above-normal Atlantic hurricane season in 2021, after increasing the number of storms considered “average” in the Atlantic basin, with a possible return of La Nina later in the 2021 season. COVID-19 continues to play a role in the global supply chain this […]
June 15, 2020
Since COVID-19 spread into the US, hard working men and women in essential industries have worked around the clock to keep our country’s vital infrastructure up and running. Like these workers, Tyndale’s core values reside in keeping our communities safe. In response to COVID-19, we anticipated our customer’s need for […]
June 12, 2020
For most people, going to work doesn’t involve being exposed to serious hazards. However, if you are a utility worker performing certain essential job functions, you are exposed to arc flash hazards on a regular basis. Companies are responsible for providing extensive safety training and workers are required to abide […]
June 3, 2020
As we learned in Part 1 of our TyndaleFRC Express blog post, choosing a managed apparel program can be challenging. In Part 2, “The Basics of TyndaleFRC Express,” learn about why TyndaleFRC Express is the best solution to meet the arc-rated and flame resistant (AR / FR) clothing needs for […]
June 1, 2020
When a company welcomes a new employee who is required to wear arc-rated flame resistant (AR / FR) clothing to stay safe on the job, you would think the process to get that employee added to the clothing program is straightforward. Not so in a uniform rental with industrial laundry […]
May 29, 2020
Invoicing from your uniform rental with industrial laundry (“rental”) provider seems like it should be straightforward – there’s a contract and the rental pricing is in the contract. So, why is the invoicing process one of the most frustrating things that customers have to deal with in a rental program? […]
May 26, 2020
As we learned in Part 1 of our Uniform Rental Scare Tactics blog post, the sales pitch by some uniform rental companies can be confusing or misleading. In Part 2, we expand on some common misleading statements made by these companies, all of which focus on “risks associated with home […]
May 20, 2020
OSHA’s final ruling is clear: if employees are subject to arc flash or flash fire hazards on the job, employers are responsible for outfitting them with the appropriate protective clothing. But managing that process through retail channels can be expensive and time-consuming, which is why we created TyndaleFRC Express. Are […]
May 18, 2020
When choosing an arc rated / flame resistant (AR / FR) clothing supplier, it’s important to understand your options and how they impact both your company and its employees. In this post and in the video below, we discuss what “underwash” means in a uniform rental with industrial laundry (“rental”) […]
May 11, 2020
The stark difference between the ‘sales pitch’ and the reality of rental programs is an often cited reason for leaving rental programs. Scare tactics are used to suggest that home laundering is “unsafe” and/or OSHA requires or strongly prefers industrial laundry. This is simply untrue and very misleading. Watch VP […]
May 8, 2020
As you are purchasing AR / FR clothing you might have seen reference to the term dual hazard. This might even lead you to the thinking that finding a garment with “dual hazard” functionality will protect you better than an arc rated or flash fire rated garment. In this FAQ […]
May 7, 2020
Shortages – when an employee doesn’t get back the garments they turned in the previous week for cleaning – are one of the most common complaints in a uniform rental program. In fact, any uniform rental account with 10+ wearers likely experiences shortages at least once a week. But what […]
March 17, 2020
This is the second post in our series examining the industry’s shift away from uniform rental (“rental”) programs with industrial laundry for arc-rated and flame resistant (AR / FR) clothing, a closer look at misconceptions that sometimes lead companies to select rental for AR / FR clothing, and unintended consequences […]
March 13, 2020
Yes! We published a blog post on what to wear under your flame resistant (FR) clothing, and today, we’re sharing what you should be wearing over your FR clothing. The answer: FR outerwear. During the cooler months, it’s important to wear outerwear to protect yourself from the elements and avoid […]
March 5, 2020
We are frequently asked about the durability of flame resistance of arc rated garments. Do my arc rated garments lose their protective ability as I wash them after each use? All FR and AR garments sold by Tyndale are guaranteed flame resistant for the service life of the garment. To […]
February 27, 2020
Note: We cover this topic in a more recent post: Which Standards Should My AR / FR Rainwear Pass? Shopping for arc-rated and flame resistant (AR/FR) rainwear? Take a VERY close look at the label. Some rainwear sold on the market as flame resistant is tested and labeled to comply […]
February 24, 2020
There are a lot of FRC safety standards out there. Understanding how they work together to inform those who are required to be in compliance with them is important. In this post – and the brief video below – we break down the hierarchy of these safety standards, starting with […]
February 20, 2020
Tyndale recently debuted our new clothing line, The Versa Collection. This line of Tyndale-made FRC focuses on comfort and style while delivering the safety and performance you expect to keep you safe on the job. Curious to know how this contemporary line of FR clothing fared during a real-word arc […]
February 13, 2020
This is a question we get fairly often, and for good reason: it’s not uncommon to wear an undershirt off the clock, for added comfort or warmth. How does this common practice apply in an energized work environment? What do the standards say, and how do the remaining options rate […]
February 11, 2020
“Before choosing Tyndale, we had a local vendor that we worked with and inventory became an issue.” – Barry O’Leary, Director of Safety at Northwestern Energy. Northwestern Energy previously was supplied through a hybrid clothing program, where they would rely on local Flame Resistant clothing (FRC) vendors to dress larger […]
February 7, 2020
We believe seeing is believing. That’s why we continually invest in real world demonstrations to visualize why wearing arc-rated flame resistant clothing – and wearing it properly – matters. As part of this commitment, we are pleased to share our latest Arc Flash Video Series. These test videos display the […]
January 23, 2020
Reading labels on flame resistant (FR) clothing can be confusing. How do you know for sure that the clothing you have offers the protection you need? FR clothing is required to have specific information on its label in order to comply with industry safety standards. In this post, we share […]
January 20, 2020
Happy New Year, and welcome to 2020! Our members here at Tyndale hope your year is filled with joy and prosperity. Join us as we recap our most popular blogs from 2019, detailing innovation and education in the world of FRC.
December 9, 2019
USA manufacturing, family-owned values, and commitment to innovation is what drew Jaime Glas, CEO and founder of the upscale women’s brand of Flame Resistant Clothing (FRC), HauteWork®, to National Safety Apparel® (NSA) as a partner. “It was an immediate fit,” said Glas of her first meeting with NSA in early […]
November 12, 2019
Nothing drives home the importance of wearing arc rated, fire resistant (AR/FR) clothing on the job than seeing what happens when non-FR clothing is subjected to an actual arc flash. Back in 2017, Tyndale broke new ground by hosting, along with Westex, an utterly unique event at the KEMA – […]
November 5, 2019
Tyndale has changed the long held beliefs that FR clothing must be bulky, unflattering, and never fashion forward. Today, safety still remains first but style is more important than ever. We have revamped Arc-rated FRC into a clothing line worthy of a runway. Both our men’s and women’s Versa Collection […]
November 1, 2019
When approaching a new project and determining what work is involved, it is important to perform a risk assessment. “Risk assessment” is a term used to describe the overall process or method where you: Identify hazards and risk factors that have the potential to cause harm. This is known as […]
October 30, 2019
Tyndale is proud to continue our strategic alliance with NSA and announce the addition of their newly redesigned Union Line collection of 100% Union-Made in the U.S. arc-rated and flame resistant (AR / FR) clothing to our product offering. These products have been redesigned with the goal of offering increased […]
October 25, 2019
There are many questions around bug spray and FRC: Is it safe? Which ones are safe? How do I know for sure? Read on to find answers and watch our video below, featuring Tyndale’s Vice President of Technical, Scott Margolin, as he provides clarity in just over a minute. Is […]
October 21, 2019
They say seeing is believing. So, if you still have any questions about the importance of wearing FR clothing on the job, you need to see this webinar. It features HD video of arcs in real 480V equipment at KEMA Powertest AND video of full scale, outdoor flash fires shot […]
October 16, 2019
Earlier this month, Tyndale and Carhartt took their shared commitment to safety on the road for a stop at the annual Independent Electrical Contractors Convention & Expo in St. Louis. As part of our year-long co-marketing initiative, Tyndale and Carhartt sponsored two events at the gathering – an educational roundtable […]
September 30, 2019
Jeans have long held a special place in our lives with the perfect fit and feel being paramount. The right pair of jeans can change the entire outlook of your day. Keeping this in mind, Tyndale has created the new Versa Regular Fit Flex FR Jeans (M24MT). These are our […]
September 24, 2019
If you’re a small to mid-size company looking to capture the multitude of benefits that are a part of a Tyndale managed FR clothing program, we have exciting news. Coming this November, Tyndale is launching a brand-new service just for you, TyndaleFRC Express. This new service offers you the best […]
September 17, 2019
Just in time for the approach of colder weather, Tyndale is pleased announce the availability of a wide selection of brand new flame resistant (FR) outerwear styles from Ariat. Long valued for their style and comfort, Ariat garments are always in high demand. To accommodate that demand, Tyndale has pre-ordered […]
August 29, 2019
What’s more comfortable than a button-down shirt, but more professional than a t-shirt? A polo! Our newly redesigned FR Polo Shirt is the best choice when you’re seeking comfort and style, while requiring protection from the hazards you face on the job. With some recent improvements made to the protective […]
August 16, 2019
Wearing arc-rated and flame resistant (AR / FR) clothing is critical in the event of an arc flash because it will not ignite and continue to burn, which is what causes most of the catastrophic injuries and fatalities. AR / FR clothing also performs an important second function: insulating you against the […]
August 6, 2019
This is the flame resistant (FR) shirt you’ve been waiting for. Carhartt’s new, lightweight, breathable FR Shirt keeps you comfortable, compliant, and looking good! Too good to be true? We think not. The FR FORCE® Lightweight Long Sleeve Shirt backs up its claims with innovative features like: 4.7 ounce, optimum […]
July 31, 2019
Since developing and establishing Managed Apparel Programs as the industry benchmark over 35 years ago, Tyndale is the trusted supplier of goods and services for hundreds of companies across the US – and we have a 98% customer retention rate! Why do customers choose our turnkey solution and stay with […]
July 22, 2019
Back in March of 2018 we used this space to alert you to a rising trend of counterfeit flame resistant clothing (FRC). As we told you then, unscrupulous dealers were creating non-FR replicas of name-brand garments and selling them as FRC – thereby putting wearers at grave risk for injury, […]
May 14, 2019
ASTM 1506, Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs, is the governing ASTM standard for flame resistant clothing for protection from arc flash. But what does 1506 compliance actually mean? Fabrics must pass two main requirements […]
April 22, 2019
You may have heard the term Flame Resistant. You may even wear FR clothing on the job. But have you ever heard an expert describe the science that keeps you safe on the jobsite? Watch Tyndale’s VP of Technical, Scott Margolin define Flame Resistant, highlight the testing system, and even […]
April 16, 2019
Spring is near but temperatures are still in flux in many parts of the country. When unpredictable weather conditions strike, layering is your best solution for comfort – especially when you’re required to wear flame resistant (FR) clothing on the job. It may be tempting to wear non-FR layers to […]
January 15, 2019
Tyndale is your one-stop shop for the arc-rated and flame resistant (AR / FR) protection you need to stay safe on the job. We offer the broadest selection of quality, comfortable daily wear and task-based PPE in the industry – from our own line, which includes a full range of […]
December 13, 2018
Tyndale is proud to carry Enespro “Mission Critical PPE” based on their commitment to provide products that meet real-world needs. Ensepro firmly believes the best arc flash suits are created by the professionals who actually wear them. That’s why at the company’s inception, founders Mike Enright and Rich Gojdics went […]
December 10, 2018
These days, everything – news, weather, social media, shopping, and more – is available at your fingertips by using your mobile device. So, why not your flame resistant (FR) clothing? Tyndale recently launched our mobile app – Tyndale FRC – from which you can quickly and easily shop your company’s […]
December 3, 2018
Personal Protective Equipment, commonly referred to as “PPE,” is any equipment worn to protect wearers from the hazards they encounter on the job. PPE products include gloves; safety shoes; eye, ear, and head protection; flame resistant clothing (FRC); and more.
November 28, 2018
Tyndale is happy to offer the convenient safety of Salisbury’s new CAT 2/8 Cal Arc Flash kits you can pack in a bag and take on the job — anywhere, anytime. These kits from Salisbury by Honeywell offer arc rated, flame resistant protection for your eyes, face, head, and body, […]
November 15, 2018
Tyndale is proud to offer you Mission Critical PPE from Enespro, designed to offer maximum comfort and functionality without sacrificing safety. A prime example is Enespro’s 40 Cal AirLite™ arc flash suit, made with a new super lightweight 11.5 oz. AirLite fabric system, so that it is actually as light […]
November 5, 2018
When working in hot, high-voltage environments, you used to have to sacrifice comfort to ensure you were fully protected. Now Salisbury by Honeywell offers a 40 cal/cm2 arc flash suit that’s lighter than you ever imagined possible. In fact, according to Salisbury their newest HRC 4 suit is the lightest […]
October 25, 2018
One common question we receive is “what is arc rated?” As it applies to flame resistant (FR) garments and personal protective equipment (PPE), arc rated means that the material has been tested for exposure to an electrical arc and assigned a value according to its performance. We’re here to provide […]
October 3, 2018
You may wear PPE certified to NFPA standards, or undertake work regulated by NFPA codes everyday. But what is NFPA and what are NFPA standards? NFPA is short for the National Fire Protection Association, a nonprofit organization committed to reducing injury, death, and other loss stemming from fire, electrical, and […]
September 26, 2018
Arc rated flame resistant (AR/FR) garments are required to have labels that clearly announce the level of protection they provide. One rating that appears on these garments is the CAT rating, short for PPE CATegory. The CAT rating tells wearers at a glance the category of protection the garment provides […]
September 24, 2018
So far in this series, we have explored the many costs of an arc flash incident, the frequency of arc flash incidents, and the economic costs involved. Now we’d like to take a look at how you can mitigate the damage – both personal and economic – in the event […]
September 5, 2018
So far we’ve looked at all the various costs an arc flash event can generate and just how often such events occur. Now we’d like to explore the economic impact an arc flash injury can have on your business. By far the greatest cost of any arc flash injury or […]
August 27, 2018
In our last post, we took a broad overview of the various costs associated with an arc flash event. But how often do arc flashes, let alone related injuries or death, actually occur. Many managers and owners justify their decision to not provide workers with arc rated, flame resistant (AR/FR) […]
August 15, 2018
Being caught in an arc flash incident can result in devastating primary costs on an unprotected worker. At best, an employee’s life and that of their family is turned upside down as they undergo a long, painful recovery and rehab process. At worst, a family is left coping with the […]
August 13, 2018
Tyndale learned of Brandon’s story and was impressed with his commitment to promoting safer work practices among electrical workers. We invited him to our headquarters and have since partnered with him on several occasions to widen the reach of his message. We last profiled Brandon in early 2018 – read […]
July 19, 2018
Tyndale is proud to announce the addition of the new Enespro™ line of “Mission Critical PPE” to our product offering. Enespro PPE, led by FR industry veterans Mike Enright and Rich Gojdics, officially launched their line of next generation arc flash suits on July 16, 2018. Designed specifically to offer […]
July 11, 2018
When you have to wear FR clothing to stay safe at work, dressing comfortably can be a challenge. FR fabrics are often heavier and less breathable than natural, untreated fibers, and the limited variety of styles makes it difficult to layer up when the weather is apt to change throughout […]
June 21, 2018
Tyndale, in cooperation with Westex by Milliken, recently held an educational event at KEMA Laboratories in Chalfont, Pennsylvania. In the morning, invited guests attended seminars by industry experts on topics such as safe work practices, changes to NFPA 70E, and how science is the key to FR safety, as well […]
June 1, 2018
Tyndale is proud to announce an exciting expansion of our strategic alliance with National Safety Apparel® (NSA). Following NSA’s recent acquisition of Rubin Brothers and the Union Line™ brand of FR apparel, Tyndale is adding the Union Line collection of 100% Union-Made in the U.S. arc-rated and flame resistant (AR […]
April 4, 2018
This is the third post in a four-part series exploring factors that could contribute to an arc flash incident, based on the experience of arc flash survivor and safety advocate, Brandon Schroeder. In the first two posts in the series, we explored behavioral and company culture-related factors that could lead […]
March 22, 2018
This is the final post in a series of five posts comparing and contrasting task-based and daily wear approaches to arc-rated (AR) clothing programs. Check out our first post here, and our posts exploring liability issues, challenges with layering, and challenges with monitoring and productivity. When choosing between a task-based and daily wear approach to protecting workers, […]
March 21, 2018
NFPA 70E has since been revised in 2021, though updates pertaining to AR / FR clothing were minor. NFPA 70E requirements for safe work practices protect personnel by reducing exposure to major electrical hazards. Originally developed at OSHA’s request, NFPA 70E helps companies and employees avoid workplace injuries and fatalities […]
March 19, 2018
This is the fourth post in a series of five posts comparing and contrasting task-based and daily wear approaches to arc-rated (AR) clothing programs. Check out our first post here, and our posts exploring liability issues and challenges with layering. In our last post we will look at important takeaways. In a task-based program, […]
March 15, 2018
This is the third post in a series of five posts comparing and contrasting task-based and daily wear approaches to arc-rated (AR) clothing programs. Check out our first post here, and our post exploring liability issues here. Next, we take a closer look at issues with monitoring and productivity, and key takeaways. As […]
March 13, 2018
This is the second post in a series of five posts comparing and contrasting task-based and daily wear approaches to arc-rated (AR) clothing programs. Check out our first post here. Next, we take a closer look at issues like challenges with layering, monitoring and productivity, and key takeaways. When deciding […]
March 9, 2018
This is the first post in a series of five posts comparing and contrasting task-based and daily wear approaches to arc-rated (AR) clothing programs. Next, we take a closer look at issues like liability, challenges with layering, monitoring and productivity, and key takeaways. As we saw in our last post, […]
March 1, 2018
You wear FR clothing to stay safe on the job. But what if your FRC isn’t providing the protection you think it is? We’ve noted a growing and alarming online trend in recent months. Online companies – often based overseas – are selling what they claim to be flame resistant […]
February 9, 2018
On August 24, 2011, Brandon Schroeder was working on a job site handling an electrical task that he had performed without incident dozens of times before. Only this time, things didn’t go according to plan – and Brandon was caught in the blast from a massive arc flash. Brandon suffered […]
January 15, 2018
When designing an arc-rated flame resistant (FR) clothing program for your workers, one of the first decisions you will make is whether to choose a “task-based” or “daily wear” approach to outfitting your workers. But what are the differences between these two approaches, and which is a better fit for […]
December 27, 2017
If you wear arc-rated (AR) clothing and personal protective equipment (PPE) with a protective rating higher than a possible arc is likely to have, you can ensure you won’t be burned in the event of an arc flash. But how do you know what incident energy is possible, so you […]
December 21, 2017
The first step in protecting yourself from arc flash and flash fire hazards on the job is wearing arc-rated flame resistant (FR) clothing. However, if you’re not wearing your FR properly, you could be leaving yourself at risk for serious injury. In fact, there are some cases in which wearing […]
November 29, 2017
Workers at risk for flash fire or arc flash hazards need to wear flame resistant clothing (FRC) in order to stay safe on the job. Multiple factors go into a company’s decision as to what FRC they will provide to their employees. While safety should always be the top consideration, […]
November 29, 2017
An arc flash event poses significant danger to anyone working on or near energized electrical equipment. An electrical fault, or short-circuit, can result in an enormous release of energy, with potentially deadly heat and molten metal projecting outward for significant distance at high speeds. How much heat, exactly? Well, if […]
October 27, 2017
The evidence is clear, arc-rated (AR) clothing saves lives! In the event of an arc flash, AR clothing does not ignite, and they insulate you against the hazard so that you’re not burned through the fabric. As we saw in our last post, ASTM F1959, Standard Test Method for Determining the Arc Rating of Materials […]
October 19, 2017
There are many cost saving opportunities companies can expect when switching from a no-choice program (employers dictate clothing for their employees) to a choice program (employees are empowered to choose preferred garments from a company-approved selection). Here are three with highest potential to positively impact your company’s budget: Product Cost One […]
October 19, 2017
NFPA 70E has since been revised in 2021, though updates pertaining to AR / FR clothing were minor. There are no shortcuts when it comes to keeping workers safe. In fact, it’s usually in the company’s – and the employee’s – best interest to incorporate voluntary safeguards above and beyond […]
October 9, 2017
Arc-rated (AR) clothing is critical in the presence of an arc flash hazard because it will not ignite and continue to burn. This can save your life! AR clothing also performs a second function, insulating you against the hazard so that you’re not burned through the fabric. But what is an arc rating, […]
September 28, 2015
This is the second post in a three-part series reviewing the 2015-16 El Niño outlook and arc-rated flame resistant rainwear options available to outdoor workers facing arc flash or flash fire hazards. In this post we explore advanced rainwear options, while in our next post we feature some cost-effective rainwear […]
July 21, 2014
Understanding all of the acronyms for clothing and standards in the electric industry can make your head spin. One common question we get is: what is the difference between arc-rated and flame resistant clothing – if there is any difference at all? FR stands for “flame resistant clothing,” specifically. An […]
February 24, 2014
Tyndale has partnered with e-Hazard to bring you an engaging one-day seminar on NFPA 70E and OSHA electrical safety requirements. Used by more NFPA 70E committee members, e-Hazard’s training provides a thorough knowledge of the dangers and recommended safe behaviors for those who work around electric hazards daily. This course […]
February 10, 2014
ASTM D6413 is the Standard Test Method for Flame Resistance of Textiles (vertical test). ASTM D6413 is used to determine flame resistance of fabrics used to protect against both electric arc and flash fire hazards. This is the defining test method for compliance with OSHA 1910.269 and one of the […]
August 13, 2013
Protective clothing and safety apparel can benefit workers in a variety of industries, so it is important to understand the risks and specific industry hazards employees face at their jobs. While both an electric arc flash and flash fire can be fatal, the duration and temperature at which these two […]
August 6, 2013
This is the fourth post of a four-part series where we cover recommendations for compliance with OSHA 1910.132 FRC Flash Fire Memo. The final, and least rigorous, approach for meeting the OSHA 1910.132 requirements would be to use garments that meet the arc flash requirements of NFPA 70E, or are […]